Operation Manual

52 53
ZONE ALARM
If your current heart rate is above or below the target zone
you selected, the BC 23.16 STS issues a warning using an
audible beep.
You can switch ON or OFF this zone alarm.
This is the process:
Open the main menu using the MENU button.
Scroll to the settings using the BIKE button or the ALTI button.
Open the settings using the MENU button.
Scroll to the USER Settings using the BIKE button or
the ALTI button.
Open the User settings using the MENU button.
Scroll to the setting for the zone alarm using the BIKE button
or the ALTI button.
Open the setting using the MENU button.
Change the setting using the BIKE button or the ALTI button.
Confirm your setting using the MENU button.
If you do not want to change any other settings,
press the BIKE button or the ALTI button until "BACK" appears on the display.
Then briefly press the MENU button.
The Settings menu closes.
ALTERNATIVELY you can also press and hold the MENU button.
The Settings menu closes.
The BC 23.16 STS returns to function mode.
ALTERNATIVELY you can also press and hold the BIKE button.
This takes you one level higher in the Settings menu.
This is the process:
Open the main menu using the MENU button.
Scroll to the settings using the BIKE button or the ALTI button.
Open the settings using the MENU button.
Scroll to the USER Settings using the BIKE button or
the ALTI button.
Open the User settings using the MENU button.
Scroll to the setting for HR Intensity (1 to 4) using the BIKE button or the ALTI button.
Open the setting using the MENU button.
Change the setting using the BIKE button or the ALTI button.
(percentage values of the intensity zone)
Confirm your setting using the MENU button.
If you do not want to change any other settings,
press the BIKE button or the ALTI button until "BACK" appears on the display.
Then briefly press the MENU button.
The Settings menu closes.
ALTERNATIVELY you can also press and hold the MENU button.
The Settings menu closes.
The BC 23.16 STS returns to function mode.
ALTERNATIVELY you can also press and hold the BIKE button.
This takes you one level higher in the Settings menu.
EN