Operation Manual

56 57

Open the Altitude menu using the MENU button.

Scroll to the Settings menu for Current Altitude using

the BIKE button or the ALTI button.

Open the setting using the MENU button.

Now you can select whether you want to enter the current

altitude in meters (or feet) or as air pressure reduced to

sea level.

Make a selection using the BIKE button or the ALTI button.

Confirm the selection using the MENU button.

Now you can set the current altitude in meters (feet) or air

pressured reduced to sea level depending on your choice.

Change the setting using the BIKE button or the ALTI button.

Confirm your setting using the MENU button.

If you do not want to change any other settings,

press the BIKE button or the ALTI button until "BACK" appears on the display.

Then briefly press the MENU button.

The Settings menu closes.

ALTERNATIVELY you can also press and hold the MENU button.

The Settings menu closes.

The BC 23.16 STS returns to function mode.

ALTERNATIVELY you can also press and hold the BIKE button.

This takes you one level higher in the Settings menu.

The settings for home altitude 2 are set the exact same way as

in the steps listed above.

If you do not want to change any other settings,

press the BIKE button or the ALTI button until "BACK" appears on the display.

Then briefly press the MENU button.

The Settings menu closes.

ALTERNATIVELY you can also press and hold the MENU button.

The Settings menu closes.

The BC 23.16 STS returns to function mode.

ALTERNATIVELY you can also press and hold the BIKE button.

This takes you one level higher in the Settings menu.

SETTING/CORRECTING THE CURRENT ALTITUDE

You set or correct (during a trip) the current altitude in the BC 23.16 STS.

The current altitude can be set in meters or feet or as an air pressure value.

When setting the air pressure value, you have to use the air pressure reduced to sea level.

NOTE: Using the currently measured air pressure (in your home) will give an incorrect

current altitude calculation. You must use the air pressure reduced to sea level.

You can find this information on a variety of weather websites.

This is the process:

Press and hold the MENU button to open the settings menu.

Switch to Settings using the BIKE button or the ALTI button.

Open the setting using the MENU button.

Scroll to the Settings menu for Altitudes using the BIKE button

or the ALTI button.