Operation Manual

64 65
ALTITUDE DOWNHILL
Set the total altitude downhill.
For example, here you can set your total altitude (altitude from
all trips) or reset the values to ZERO at the beginning of the
new cycling season.
The setting can be made separately for bike 1 and bike 2.
NOTE: The BC 23.16 STS features data storage.
Data is not lost during a battery change.
This is the process:
Press and hold the MENU button to open the Settings menu.
Switch to Settings using the BIKE button or the ALTI button.
Open the setting using the MENU button.
Scroll to the Settings menu for the Totals using
the BIKE button or the ALTI button.
Open the setting using the MENU button.
Scroll to the setting for the total altitude downhill using
the BIKE button or the ALTI button.
Open the setting using the MENU button.
The left digit for the setting flashes and is ready to be set.
You can change the value of this digit using the BIKE button or the ALTI button.
Confirm the setting using the MENU button.
The next digit farthest to the left starts to flash and is ready for setting.
You can change the value of this digit using the BIKE button or the ALTI button.
Confirm the setting using the MENU button.
Once you have set all of the digits, confirm the setting using the MENU button.
If you want to make any other changes to settings, you can go
to the next setting for the total altitude downhill for bike 2 using
the BIKE button or the ALTI button.
The setting is made the same way as setting the total altitude
downhill for bike 1 described above.
Open the setting using the MENU button.
Scroll to the setting for the total distance uphill using
the BIKE button or the ALTI button.
Open the setting for total distance uphill using
the MENU button.
The left digit for the setting flashes and is ready to be set.
You can change the value of this digit using the BIKE button or
the ALTI button.
Confirm the setting using the MENU button.
The next digit farthest to the left starts to flash and is ready
for setting.
You can change the value of this digit using the BIKE button or
the ALTI button.
Confirm the setting using the MENU button.
Once you have set all of the digits, confirm the setting using
the MENU button.
If you want to make any other changes to settings, you can go to
the next setting for the total distance uphill for bike 2 using
the BIKE button or the ALTI button.
The setting is made the same way as setting the total distance
uphill for bike 1 described above.
If you do not want to make any other changes to settings,
scroll to the "Back" menu item using the BIKE or the ALTI button.
Confirm the "Back" using the MENU button.
ALTERNATIVELY: If you do not want to change any other settings,
press and hold the MENU button.
The Settings menu closes.
The BC 23.16 STS returns to function mode.
ALTERNATIVELY you can also press and hold the BIKE button.
This takes you one level higher in the Settings menu.
EN