Operation Manual

76 77
If you have also travelled with bike 2, the values for bike 2 are displayed here as well.
This requires that you have travelled at least 1 km on bike 2.
Scroll to the values for BIKE 2 using the BIKE button or the ALTI button.
All of the totals for bike 1 plus bike 2 are then displayed.
Continue scrolling to BACK to exit the menu.
Confirm using the MENU button.
Alternatively: Press and hold the BIKE button.
Resetting trip data after the trip
After each trip you can reset the data for that trip back to ZERO.
The BC 23.16 STS is ready for the next trip.
NOTE: Your totals are not reset to ZERO. This data is stored in the totals.
The log from the activity (from the trip) is not deleted either.
This is the process:
At the function display, press and hold the BIKE button for
a few seconds.
On the display, the following text appears: Trip Data RESET
Total distance 1 (total of all day trips with bike 1)
The total distance counts up to 99,999 km or miles.
Exceeding this value resets the total distance count back to zero.
If you toggle from miles to km and the conversion result is more than 100,000 km,
only the value greater than 100,000 km is displayed.
Using the BIKE button or the ALTI button, now scroll to
total trip time for bike 1 (total of all day trips)
The total trip time counts up to 9999:59 HHHH:MM.
Exceeding this value resets the total trip time count back
to zero.
You can then go to the total altitude uphill for bike 1 using
the BIKE button or the ALTI button.
Continue scrolling to distance uphill using the BIKE or
the ALTI button.
Continue scrolling to altitude downhill using the BIKE or
the ALTI button.
Continue scrolling to distance downhill using the BIKE or
the ALTI button.
Continue scrolling to calories using the BIKE or the ALTI button.
EN