Operation Manual

78 79
If you continue to hold the BIKE button, the trip data is then reset to zero.
The following data is reset to zero:
– Distance
– Ride time
– Average speed
– Maximum speed
– Average cadence (if cadence tracking is activated)
– Maximum cadence (if cadence tracking is activated)
– Average power (if cadence tracking is activated)
– Altitude graph
– Altitude uphill
– Distance uphill
– Altitude downhill
– Distance downhill
– Maximum altitude of the trip
– Calories
– Average heart rate
– Maximum heart rate
– Distribution of the intensity zones
– Lap data
LAP COUNTER
The BC 23.16 STS has a lap counter that stores a series of values for a distance section =
lap. You can store up to 50 laps for one trip.
START OF THE LAP COUNTER
The lap counter is always started automatically for the first lap if another trip is started
after the trip data is reset.
The second lap and each additional lap is started by briefly pressing the LAP button.
The lap counter can be started from ANY function.
NOTE: If you take a break (speed is ZERO), the counter is stopped automatically.
The lap counter automatically starts back up when you are back in motion.
RESET OF THE LAP COUNTER
The lap counter is reset if the trip data is reset to zero.
The lap counter is ready to start again after the RESET.
If a new lap is started by pressing the LAP button, a brief overview of the values of the last
lap appears on the display of the BC 23.16 STS.
Here you can see:
– Average heart rate during the lap
– Average cadence during the lap
– Current altitude during the lap
– Lap number
– Average speed during the lap
– Length of the lap
– Ride time of the lap
This information remains on the display for 10 seconds.
Pressing any button ends the lap display and returns to
function mode.
DISPLAY OF THE STORED LAP DATA
The BC 23.16 STS has a Lap view. The Lap view lets you retrieve the data for any
stored lap and compare the data of different laps.
This is the process:
Press and hold the LAP button until the Lap view opens.
You will see the first value of the first lap.
Here Lap 1: Lap distance 0.96 km
EN