Operation Manual

84 85
You will find a marking on the cover.
And you will find a marking on the transmitter's housing.
Ensure that the marking on the battery cover and the marking
on the computer match.
DO NOT APPLY ANY FORCE!
Ensure that the battery is not tilted.
Ensure that the rubber seal lies flat on the battery
compartment cover.
4. Use a coin to tighten the battery cover by turning it clockwise
as far as it will go.
Follow the same steps for the cadence transmitter and the
heart rate transmitter.
o
p
e
n
-
c
l
o
s
e
10
C
ENT
o
p
e
n
-
c
l
o
s
e
Now insert the battery cover with the battery into
the computer's battery compartment.
Ensure that you insert the cover CORRECTLY.
You will find a marking on the cover and on the computer's
housing.
Ensure that the marking on the battery cover and the marking
on the computer match.
DO NOT APPLY ANY FORCE!
Ensure that the battery is not tilted.
Ensure that the rubber seal lies flat on the battery
compartment cover.
4. Use a coin to tighten the battery cover by turning it clockwise
as far as it will go.
o
p
e
n
-
c
l
o
s
e
o
p
e
n
-
c
l
o
s
e
Changing the battery in the transmitters
Change the batteries in the transmitters every year.
This lets you ensure they continue to function without any
problems.
This is the process:
1. Remove the battery compartment cover using a coin
or a battery (only on STS transmitters).
2. Take out the empty battery.
3. Insert the battery into the battery cover with the
NEGATIVE (-) pole facing upwards.
Now insert the battery cover with the battery into the
transmitter's battery compartment.
Ensure that you insert the cover CORRECTLY.
10
C
ENT
o
p
e
n
-
c
l
o
s
e
EN