Operation Manual

86 87

STEP 2:

Place spoke magnet on an outer spoke.

The magnetic core thereby points to the transmitter.

Align magnet to the sensor marking on the transmitter with max. 10 mm space.

Adjust using the screw!

Radio

transmitter

Radio

transmitter

Max. 10 mm

(0.4 inch)

Power magnet

Mounting the bracket and the

speed transmitter

MOUNTING THE BRACKET AND THE RADIO TRANSMITTER:

Begin by mounting the transmitter and magnet.

STEP 1:

Mount the transmitter on the fork side, on which you want to mount the computer on the

handlebar later (right or left) with the supplied O-ring or with zip ties.

NOTE: The transmitter MUST be mounted on the LEFT side (in the direction of travel) if

you are also mounting a cadence transmitter.

NOTE: The sensor marking on the transmitter should point to the spokes in this set-up.

The transmitter can be mounted on the fork in the front, inside or rear of the fork,

depending on the space available.

O-ring or zip ties

Optional, not

included