User's Manual

134
3
While checking the image, use Front or Rear Dial or buttons to change
the adjustment value (or option). Then, press the
to accept your change.
4
Repeat Step 2 and 3 in case there are multiple items to change.
5
After finalizing the setting, select (the Process RAW Development icon)
and press the
button.
6
Select [Yes] with the buttons and press the button to apply the
setting.
To cancel, select [No] and press the
button.
 At the time of playback, the mark is displayed for the
JPEG file created from DNG data.
 The File Number of the JPEG image developed from RAW data will
become the next number following the final recorded file in the memory
card.
CAUTION
 If there is insufficient space on the card, a warning message is displayed,
and DNG development cannot be performed.
 It is recommended that SIGMA Photo Pro is used for further detailed
adjustment.
CINEMAGRAPH
You can create a "cinemagraph" in which only a part of an image is moving,
from the exposed movie file.
 A cinemagraph image cannot be created from the movie file recorded in
[Director's Viewfinder].