User's Manual

50
Highlight
Displays the higher brightness value range in zebra
patterns using the arbitrary brightness value as a standard.
Exposure
Level
Displays the arbitrary percentage range in zebra patterns
using the arbitrary brightness value as a standard.
HIGHLIGHT DISPLAY SETTING OPTIONS:
Highlight Level
70 to 100% (Brightness value: Approx.178 to 255)
Color
White, Black, Red, Yellow, Blue, Green
EXPOSURE LEVEL DISPLAY SETTING OPTIONS:
Exposure Level
0 to 100% (Brightness value: Approx.0 to 255)
Range
±5 to 30%
Color
White, Black, Red, Yellow, Blue, Green
 Whether to display the Zebra Pattern can be selected from [Zebra
Pattern] in Display Mode Settings (P.146). You can also assign this
function to a custom button (P.116).
BULB SETTING
(STILL)
The shutter remains open when the shutter button is pressed all the way
down.
1
Set the Exposure Mode to the M position.
2
Rotate the Rear dial until BULB is displayed.
3
Rotate the Front dial to select the desired aperture value.
4
Depress the shutter button fully to take the picture.
CAUTION
 It is not possible to use Bulb photography for more than 300 seconds.
The shutter will automatically close about 300 seconds after the shutter
button was pressed.
 A long exposure may increase noise.
 It cannot be set to BULB during ISO Auto.