User's Manual

51
FOCUSING
HOW TO USE AUTOFOCUS
1
Set the focus mode selector switch (if
present on the lens) to AF mode.
2
Set the camera’s focus mode to
( P. 51). (Set to
in CINE mode.)
3
Place the photograph subject in the
multi-point distance measurement area
frame, and half-press the shutter button.
 The focus frame at the focused position
is displayed in green, the focus indicator
lights up, and the focus sound beeps.
(No focus sound beeps in CINE mode.)
 If the subject is out of focus, the multi-point distance measurement area
frame flash.
CAUTION
 In CINE mode (CINE style), the multi-point distance measurement area
frame and focus frame are displayed only when the shutter button is
being half-pressed.
FOCUS MODE SETTING
The focus mode can be selected depending on the subject.
Press the FOCUS button, and select the desired focus mode using the
Front/Rear dial or the
buttons.