C43EN19Y3 E ENGLISH USER’S MANUAL
Thank you for purchasing the SIGMA fp. Please read this manual carefully so that you will learn how to use the product correctly. Be sure to read the SAFETY PRECAUTIONS on page 7 before using your camera. Please keep this instruction booklet handy for future reference. Doing so will allow you to understand and take advantage of the camera’s unique features at any time. The warranty of this product is one year from the date of purchase.
Disposal of Electric and Electronic Equipment in Private Households Disposal of used Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol indicates that this product shall not be treated as household waste. Instead it shall be collected separately for the recycling of electrical and electronic equipment.
TABLE OF CONTENTS PACKAGE CONTENTS / ACCESSORIES.............................................. 3 TABLE OF CONTENTS .......................................................................... 4 SAFETY PRECAUTIONS ....................................................................... 7 HANDLING PRECAUTIONS................................................................. 10 SD MEMORY CARDS (OPTIONAL) ................................................. 11 ABOUT THE LENSES .........................................
FOCUSING ........................................................................................... 51 HOW TO USE AUTOFOCUS............................................................. 51 FOCUS MODE SETTING .................................................................. 52 FOCUS FRAME SETTING ................................................................ 54 FOCUSING USING MANUAL FOCUS .............................................. 56 OTHER FOCUS SETTINGS ...............................................
LENS FUNCTION SETTINGS ......................................................... 108 HALF-PRESSED AEL ......................................................................110 REVIEWING AND DELETING IMAGES ............................. 111 VIEWING ONE IMAGE AT A TIME ................................................... 111 MAGNIFYING IMAGES (STILL IMAGES ONLY) ..............................112 VIEWING NINE IMAGES AT A TIME (CONTACT SHEET VIEW) .....113 VIEWING IMAGE INFORMATION..............................
SAFETY PRECAUTIONS To avoid causing damage or injury, please read this instruction manual carefully, before using the camera. Please take special note of the following two cautionary symbols. Using the product and disregarding this warning sign Warning !! may cause serious injury or other dangerous results. Using the product disregarding this caution sign may Caution !! cause injury or damage. This symbol denotes a warning or point, where caution is required.
Keep batteries in a safe place out of children’s reach. If a battery is swallowed, call for emergency medical aid immediately. WARNING (BATTERY CHARGER AND AC ADAPTER) The battery charger is for indoor use only. Do not store the charger in humid or dusty locations. Use it within the 0°C - 40°C temperature range only. The AC Adapter is designed for use with this product only. Do not use it with any other appliance. Doing so may cause overheating, fire, electric shock or injury.
Do not look at the sun with the lens of your camera; otherwise you could lose your eyesight. Keep the camera away from moisture or water. If you drop your camera/lens in water, please contact the retailer where you purchased the camera, or a service station immediately. If you use the camera with this condition it can cause electric shock or fire. Prevent water, or metallic and other conductive objects from coming into contact with the terminals of the camera body.
If the liquid crystal display (LCD) monitor becomes damaged, be careful of the fragments of glass, which can cause injury. If the liquid inside the LCD monitor leaks out, and you are faced with the following situations, please do as follows. If the liquid adheres to clothes or the skin, wash it away with soap immediately. If the liquid enters the eye, flush the affected eye with clean water immediately for 15 minutes, and seek medical assistance.
The camera will work within a temperature range between 0˚C/32˚F and +40˚C/104˚F and humidity less than 85% (no condensation). However, in cold temperatures below 0˚C, the power performance of the battery is reduced. Please carry a spare battery in these circumstances, and keep the batteries warm. Static electricity or magnetic fields may affect the operation of the camera. If such exposure occurs, please remove the battery from the camera and re-insert it, to reset the camera’s microprocessors.
For movie shooting, an SD card may not be available depending on the bit rate. For details on compatible media, refer to "BIT RATE AND COMPATIBLE MEDIA" (P.76). SD cards have a write protection switch, which prevents the card from being accidentally written to or formatted. Moving the switch to the ‘LOCK’ position prevents accidental erasure of files. Do not leave the card in direct sunlight or near a heating device.
ELECTRONIC SHUTTER This product is not equipped with a mechanical shutter mechanism. It provides an electronic shutter that electronically controls the image sensor to adjust the exposure time. The electronic shutter enables the high-speed shutter speed and high-speed continuous shooting with no noise or vibration. However, the electronic shutter has disadvantages, so be sure to note the following points.
DESCRIPTION OF THE PARTS 1 2 3 11 12 4 4 5 6 13 7 8 9 7 25 26 27 28 29 10 14 15 16 17 18 7 19 20 30 31 32 33 34 21 35 22 23 24 4 37 36 14
1 Lens Signal Contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 LCD Monitor / Touch Panel Microphone / Cable Release Microphone (Right) 21 Terminal Front Dial (View) Button 22 Position Index for Tripod Socket 23 Busy Lamp Lens Mount Index / 24 (Display) Button Lens Lock Pin Lens Lock Button 25 REC Button Tripod / Strap Holder Sockets 26 REC Lamp Battery / SD Card Cover 27 Shutter Button DC Connector Cover 28 AEL Button Battery / SD Card Cover Latch 29 (Quick Set) Button Microphone (Left) 30 Tone Co
ABOUT REAR DIAL (31) The Rear Dial also serves as a direction button. In this instruction manual, , , , or . each position is shown as (Up button) (FOCUS button) (Left button) button (Right button) ( (Down button) button) The up and down operations are indicated by operations by , the left and right , and the up, down, left, and right operations by .
In CINE mode (STILL-like style) 1 2 3 4 5 6 7 8 9 Battery Level Indicator ISO Sensitivity DC Crop Mode * Image Size Aspect Ratio Image Quality Number of shots remaining Memory Media White Balance 27 28 29 30 31 32 33 34 35 10 Camera Shake Warning 36 11 AE Lock / AF Lock * 37 12 Date / Time * 38 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Drive Mode Face / Eye Detection AF * Focus Limiter * Focus Mode Exposure BKT * Electronic Stabilization * Auto Bracketing / HDR * Electronic Level * Histogram / Wa
This icon is displayed while image processing is being performed in the camera just after shooting. While this icon is displayed, it may not be possible to operate the camera. This icon indicates that the camera is still shooting with a slow shutter speed. PREPARATION ATTACHING THE CARRY STRAP Using a coin, attach the supplied strap holders securely to the tripod/strap holder sockets on both sides of the camera.
ABOUT HOT SHOE UNIT HU-11 When using the flash, attach the hot shoe unit HU-11, which is supplied with this product, to the camera. 1 If the strap holder is attached to the left side of the camera, remove it using a coin or similar object. 2 Remove the contact cover and place it in the contact cover holder on HU-11. 3 Remove the contact protection cap on HU-11 and attach HU-11 securely to the camera by turning the locking ring.
HDMI CABLE LOCK HU-11 comes with an HDMI cable lock that prevents the HDMI cable from being disconnected when shooting images. Connect the HDMI cable to the HDMI terminal on your camera and secure the cable using the cable locking screw. TO CHARGE THE BATTERY Insert the supplied lithium-ion rechargeable battery, BP-51 battery pack, (hereafter, battery) into the camera. Connect the supplied UAC-11 AC adapter to charge the battery. Charge the battery before using the camera for the first time.
4 Open the terminal cover and connect the camera to the AC adapter using the USB cable provided with the camera. Make sure that the cable is connected in the correct orientation. 5 Insert the AC adapter into the power outlet. When charging is in progress, the charge lamp will light up yellow-green. It takes about 240 minutes to recharge the battery. The time required to recharge the battery depends on the ambient temperature and the status of the recharge level.
The battery can be charged with BC-71 battery charger (optional). (P.148) The supplied AC adapter is provided for charging the battery. To operate the camera on 100 VAC, please purchase the SAC-7P AC adapter set (optional). (P.148) (P.149) CHARGING THE BATTERY THROUGH THE COMPUTER Connect the camera to a computer using the supplied USB cable. The battery cannot be charged when the camera is turned on. Be sure to turn off your camera before charging.
MOUNTING AND REMOVING THE LENS 1 Turn the power switch to OFF. 2 Remove the lens’s rear cap and the camera’s body cap. 3 Align the lens mount index on the camera with the index on the lens. Insert the lens into the mount of the camera and rotate the lens clockwise until it clicks into the locked position. CAUTION To ensure the lens fits correctly, do not press the lens lock button while attaching the lens. Make sure that the lens is locked in place.
SETTING THE LANGUAGE The default language displayed on the LCD monitor is English. The language can be changed using [Language / 言語] in the Set-up menu. For when the camera used for the first time When the camera is switched on for the first time, select a language on the buttons and confirm the language by pressing the display. Press button. After selecting a language, input the date and time on the display.
Selectable languages English 日本語 Deutsch Français Español Italiano 简体中文 繁體中文 한국어 English (Default) Japanese German French Spanish Italian Simplified Chinese Traditional Chinese Korean Русский Nederlands Polski Português Dansk Svenska Norsk Suomi Russian Dutch Polish Portuguese Danish Swedish Norwegian Finnish SETTING THE TIME AND DATE Please set the camera’s internal clock, before using the camera for the first time or after extended periods of disuse. 1 Turn the camera on.
7 Press the button. button to select an item and change it by pressing the 8 Press the button to apply the setting or the button to return to the date/ time set-up page without making any changes. CAUTION The camera’s internal clock is powered by a capacitor that receives its charge from camera’s battery. If the camera is without battery for an extended period of time, such as after prolonged storage, the internal clock will need to be reset.
CHECKING THE BATTERY STATUS The battery icon, which shows the capacity of the battery, is shown on the left corner on the color LCD panel. Please take notice of the battery status before and when in use. The power of the battery is insufficient, replace or recharge the battery immediately. (Red) The power of the battery is empty; the camera will no longer work. Replace or recharge the battery immediately. Camera is operating on household power or an external battery.
ABOUT CINE/STILL SWITCH This camera can shoot still images and movies. Depending on the position of the CINE/STILL switch, the camera can be used as a camera dedicated for shooting both still images and movies. To shoot still images, select STILL (STILL mode). To shoot movies, select CINE (CINE mode). CAMERA SET-UP MENU This section describes the various settings in the Camera Set-up menu. You can set detailed functions and basic camera settings from the Camera Set-up menu screen.
TO DISPLAY THE SET-UP MENU Press the button on the back of the camera. Press the button again to close the Set-up menu. Tab area Move to another page Each time the Front Dial is rotated, the screen moves to the next tab. (When the tab area is selected, it is possible to change the setting menu by pressing the buttons as well.) While in the Set-up Menu: Use the buttons or the Rear Dial to select the desired item. Press the or button to open a sub-menu.
The Camera Set-up menu is divided into three groups. / SHOOT (CAPTURE SETTINGS) (Blue Tab) Set the shooting function. If the button is pressed during the shooting SHOOT] menu opens mode, the [ when the CINE/STILL switch is set to the [STILL] position, and the [ SHOOT] menu opens when the CINE/STILL switch is set to the [CINE] position. PLAY (PLAYBACK) (Red Tab) Set the playback function. If the button is pressed during playback mode, the [ PLAY] menu opens.
LIST OF MENU FUNCTIONS For more information about each menu item, refer to the appropriate pages.
Menu Item Record Settings Audio Record / Color Settings Color Mode Tone Control Fill Light Lens Optics Compensation 32 S - Page 75 75 84 Second-level Menu Item C S ○ Color Mode - ○ Color Space - ○ ○ ○ - ○ Distortion ○ Lateral Chromatic Aberration ○ Diffraction ○ Vignetting ○ Color Shading ○ Page 87 91 107 91 93 94 95 95 95 95 95 Second-level Menu Item Focus Mode Focus Area AF + MF Pre-AF Constant AF Face / Eye Detection AF Focus Limiter AF during Image Magnification AF Magnification Prioritize Focu
Menu Item Focus Stabilization Lens Function Settings Flash / C S ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Page 61 62 62 66 67 52 58 66 108 - ○ 107 - ○ ○ ○ ○ 106 106 106 106 Second-level Menu Item - C ○ ○ S ○ ○ ○ - Page 108 42 74 109 81 SHOOT(5) Menu Item Shutter blackout Quick Preview Outer Frame Frame Guide Director's Viewfinder Preview Exposure in M Mode Brightness Level Monitor Zebra Pattern / Second-level Menu Item MF Magnification MF Display Focus Peaking Lens Optical Stabilization Electronic Stabiliz
Menu Item REC Button Settings Shutter Button Settings AEL Button Settings Half-pressed AEL Half-pressed AF-ON Second-level Menu Item - C S - ○ ○ ○ - ○ ○ Page 110 110 86 110 110 Second-level Menu Item - C S ○ ○ ○ ○ ○ ○ Page 120 120 122 123 116 125 Second-level Menu Item - C S ○ ○ ○ ○ ○ Page 126 128 131 132 132 Second-level Menu Item - C S Page ○ 42,133 ○ 133 ○ ○ 133 ○ 135 ○ 136 PLAY(1) Menu Item Filter Files to Display Lock Mark Rotate Delete Slideshow PLAY(2) Menu Item DNG Development Cinemagra
SYSTEM(2) Menu Item Shooting Style Custom Mode Setting Custom QS Mode Settings Operation in LOCK Mode Touch Operation Second-level Menu Item - C S ○ ○ ○ ○ ○ ○ ○ ○ Page 43 103 37 138 105 27 Second-level Menu Item LCD Off Auto Power Off ECO Mode C S ○ ○ ○ ○ ○ ○ ○ Page 141 141 142 142 142 142 143 Second-level Menu Item - C S ○ ○ ○ ○ ○ Page 143 144 145 Second-level Menu Item - C S ○ ○ ○ ○ ○ Page 25 24 145 145 146 SYSTEM(3) Menu Item Electronic Sounds Adjust Electronic Level Pixel Refresh LCD Settin
QUICK SET MENU The following most frequently used menu items can be easily set by pressing the QS button. In STILL mode AE Metering Mode (P.85) ISO Sensitivity (P.68) Image Quality (P.71) Image Size (P.72) Drive Mode (P.63) White Balance (P.87) Fill Light (P.94) Aspect Ratio (P.73) Option list display of the selected items In CINE mode (CINE style) Frame Rate (P.75) Format (P.74) Time Code (P.136) Shutter Angle (P.47)(P.48) Aperture (P.46)(P.48) ISO Sensitivity (P.68) White Balance (P.
For example, to change the image quality to DNG 1 Press the QS button to display the Quick Set Menu. 2 Press the buttons to select the item related to image quality ( ). 3 Rotate the Front Dial or the Rear Dial to display [DNG]. 4 Press the button or half-press the shutter button to return to the shooting mode. TIP It may be possible to make more detailed settings depending on items or Further Options" is displayed. Press the options.
The items that can be allocated to the QS menu are: * C = CINE mode, S = STILL mode Menu Item Shooting Mode Shutter Speed / Shutter Angle *1 C ○ S ○ Menu Item Color Mode C ○ S ○ ○ *3 - Color Effect Amount ○ ○ Aperture Exposure Compensation ○ *3 - Tone Control ○ ○ ○ *3 - Fill Light - ○ ISO Sensitivity ○ ○ ○ ○ ○ ○ *4 ○ ○ ○ ○ ○ ○ ○ *4 ○ ○ ○ ○ *4 ○ Focus Limiter ○ ○ ○ *4 ○ Focus Peaking ○ ○ ○ *4 ○ *4 ○ ○ ○ ○ ○ ○ HDR ○ ○ DC Crop Mode Image Quality / Format
CHANGING THE DISPLAY MODE LCD Monitor Display can be changed by pressing the button. In STILL mode → → Custom 1 Custom 2 Custom 3 In CINE mode (CINE style) → Custom 1 → Custom 2 Custom 3 In CINE mode (STILL-like style) → Custom 1 → Custom 2 Custom 3 Refer to MONITOR DISPLAY DURING SHOOTING on page 16 for the meaning of each icon. You can customize the information you want to view (refer to page 138). The size of icons and text can be changed (refer to page 138).
(PLAYBACK MODE) → Display Icons (Display date and time) (P.111) → Display Icons (Display Image Info*1) (P.111) → 1/3 Display Image Hide Icons Info Screen (Display Image Info*1) (P.114) 2/3 Display Image Info Screen (Lens Optics Compensation) (P.114) 3/3 Display Image Info Screen (Copyright Information screen) (P.114) *1 40 When playing back cinemagraphs, the exposure compensation value and playback speed during editing are displayed.
TO INSERT THE CARD 1 Make sure that the power switch is set to OFF. Rotate the battery/SD card cover latch to open the cover. 2 Insert the card as per the instructions. Insert the card until it clicks. 3 Close the battery compartment cover and lock the cover by turning the battery/SD card cover latch. TO REMOVE THE CARD Push the card in until it clicks and then pull it out straight. WARNING!! While the Busy Lamp is on or flashing, do not take out the battery or the card.
FORMATTING THE CARD Be sure to format the cards in the camera before use. If your camera is unable to take pictures because of a card error, format the card. [ SYSTEM ] → [Memory Media Format] → [SD Card] In [SD Card Format] screen, press the press the button. To cancel, select [No] and press the buttons, select [Yes], and then button. WARNING Formatting erases all files, including locked files.
DOING THE SHOOTING TAKING A PICTURE The general procedure to follow to take a picture is as follows. Set the CINE/STILL switch to [STILL]. Configure image settings such as the image quality and image size. (P.71) Set the ISO sensitivity. (P.68) Determine the exposure. (P.45) Focus the camera. (P.51) Hold-down the shutter button to take a picture. For information about other settings, refer to the appropriate pages. SHOOTING A MOVIE The general procedure to shoot a movie is as follows.
Set the ISO sensitivity. (P.68) Determine the exposure. (P.45) Focus the camera. (P.51) Press the shutter button or REC button to start shooting. During movie shooting... CINE STILL-like REC lamp: Lights, Recording indicator: ●REC REC lamp: Lights, Recording indicator: ● (red) Press the REC button again to stop shooting. When movie shooting stops...
The image quality and image size of still images vary depending on the setting for [Record Settings] (P.74). Image Quality Image Size Format CinemaDNG MOV Resolution UHD FHD DNG JPEG (FINE) 3840x2160 1920x1080 SELECTING THE EXPOSURE MODE The features and the operation methods of the four different exposure modes of the camera are explained below.
P PROGRAM AE Use this mode for casual shooting. In the Program AE mode, the camera automatically selects an appropriate combination of shutter speed and aperture values based on the brightness of the subject. CAUTION If the mark is shown, it may cause the camera to shake because the shutter speed reduces. Increase the ISO sensitivity (see page 68) or use a tripod. If the subject is too bright or dark, both shutter speed and aperture value indicators flash. Decrease the ISO sensitivity (see page 68).
S SHUTTER SPEED PRIORITY AE Set the desired shutter speed. The camera automatically determines the aperture value based on the brightness of the subject. Set the desired shutter speed by rotating the Front Dial. CAUTION If the subject is too bright or dark, the aperture value indicator flashes. Adjust the shutter speed until it stops flashing. In CINE mode (CINE style) To set the shutter angle (speed), open the Quick Set menu or select [ SHOOT] → [Exposure Settings].
In CINE mode (CINE style) To set the shutter angle (speed) and aperture, open the Quick Set menu or select [ SHOOT] → [Exposure Settings]. In the Quick Set menu, to switch to S Mode, press the button while selecting the aperture. To switch to A mode, press the button while selecting the shutter angle. In the [ SHOOT] menu, to switch to S mode, set the aperture value to [Auto]. To switch to A mode, set the shutter angle (speed) to [Auto].
LCD DISPLAY MONITOR IN M MODE (STILL) When the exposure mode is set to M, the actual exposure is applied to the screen. If it is difficult to confirm the focus or composition, you can switch the screen brightness to the desired mode. [ SHOOT] → [Preview Exposure in M Mode] Off On (Default) Brightness of the LCD Display is automatically adjusted for better visibility. The selected exposure value is reflected in the LCD Display.
ZEBRA PATTERN Parts that may be overexposed are shown in zebra patterns. [ / SHOOT] → [Zebra Pattern] → [Zebra Display] Highlight Exposure Level Displays the higher brightness value range in zebra patterns using the arbitrary brightness value as a standard. Displays the arbitrary percentage range in zebra patterns using the arbitrary brightness value as a standard. HIGHLIGHT DISPLAY SETTING OPTIONS: Highlight Level Color 70 to 100% (Brightness value: Approx.
BULB SETTING (STILL) The shutter remains open when the shutter button is pressed all the way down. 1 Set the Exposure Mode to the M position. 2 Rotate the Rear dial until BULB is displayed. 3 Rotate the Front dial to select the desired aperture value. 4 Depress the shutter button fully to take the picture. CAUTION It is not possible to use Bulb photography for more than 300 seconds. The shutter will automatically close about 300 seconds after the shutter button was pressed.
3 Place the photograph subject in the multi-point distance measurement area frame, and half-press the shutter button. The focus frame at the focused position is displayed in green, the focus indicator lights up, and the focus sound beeps. If the subject is out of focus, the multi-point distance measurement area frame and the focus indicator flash.
Single AF (Default) Continuous AF Manual Focus Available for a still subject. When the subject comes into focus, the focus point is fixed while the shutter button is being half-pressed. You can change the composition of the shoot while the focus point remains fixed (Focus Lock shooting*). The exposure is locked at the value when the shutter button is half-pressed. When Continuous Drive Mode is selected, continuous shooting is conducted at the focus position of the first frame.
FOCUS FRAME SETTING You can change the focus frame size or position as well as the operation method. button, and select the desired option using the Front/Rear dial Press the or the buttons. You can also select [ target. / SHOOT] → [Focus] → [Focus Area] to set the After the setting is completed, press the button to apply the setting. button or half-press the shutter Multi Auto Focus Points (Default) Single (1-point selection) Tracking MULTI AUTO FOCUS POINTS Uses up to 49 focus frames for focusing.
SINGLE (1-POINT SELECTION) Focus with the focus frame at the desired position. This function is available when the subject position is determined. 49 points select mode Free move mode Focusing point moving area Each time the AEL button is pressed, the mode switches between [49 points select mode] and [Free move mode]. When [49 points select mode] is selected, choose the desired focus frame by pressing the buttons.
If tracking is interrupted, the focus frame returns to the initial position. CAUTION Tracking may not operate properly under certain conditions such as when: the movement of the subject is too rapid ● the subject is too small or too large ● the brightness of the scene changes ● the scene is dark. ● FOCUSING USING MANUAL FOCUS 1 Set the focus mode selector switch (if one is on the lens) to MF.
CAUTION If a lens with manual fine-adjustment enabled is attached via the mount converter MC-21, it is always possible to make fine adjustments even if the camera is set to [Off]. PRE-AF (STILL) AF mode is activated before the shutter button is half-pressed. [ SHOOT] → [Focus] → [Pre-AF] → [On] CONSTANT AF (CINE) AF mode is activated before movie recording, and it continues to operate even when a movie is being recorded.
When a face and an eye are detected, the orange detection frame is displayed. When the detected face and eye are focused after the shutter button is half-pressed, the detection frame changes to green. The mode is changed to "Evaluative" that focuses on the detected face. If multiple people's faces are detected, the detection frame is displayed for the face that appears to be the nearest. CAUTION [Face / Eye Detection AF] is not available in MF mode.
If [Near Side] is selected, the icon is displayed. If [Far Side] is selected, the icon is displayed. CAUTION This setting is only available for compatible lenses. For details, please refer to the lens manual. AF MAGNIFICATION Specify the magnification method in AF mode. [ / SHOOT] → [Focus] → [AF Magnification] Image Magnification Auto Magnification Duration of Auto Magnification Select the image magnification range. Sets whether or not to automatically magnify an image when focusing.
AF DURING IMAGE MAGNIFICATION AF shooting is possible during image magnification. You can focus on a fine part. [ / SHOOT] → [Focus] → [AF during Image Magnification] → [On] Setting it to [On] displays the "+" mark in the center of the magnified image. Press the button to magnify the image, adjust the subject to the "+" mark, and half-press the shutter button. When the subject is focused, the "+" mark changes to green. Then, release the shutter.
MF MAGNIFICATION Specify the magnification method in MF mode. [ / SHOOT] → [Focus] → [MF Magnification] Image Magnification Auto Magnification Duration of Auto Magnification Select the image magnification range. Sets whether or not to automatically magnify an image when the focus ring is turned. Specify the magnification period. Image Magnification Full Screen Magnifies an image on the full screen. Magnifies an image in the range of 25% in the PIP center of the screen.
The Image Magnification function can be assigned to the AEL button. Also, you can double-tap the touch panel to enable Image Magnification in the same way as when using the button. MF DISPLAY (CINE/STILL) This function displays the scale bar that is useful for focusing in MF mode. [ / SHOOT] → [Focus] → [MF Display] Off Scale Bar - Scale Bar - Shooting Distance Does not display the scale bar. Displays the scale bar on which the far side is on the left and the near side is on the right.
CAUTION [Focus Peaking] cannot be used with [Zebra Pattern] (P.50). If both are set to [On], [Zebra Pattern] is given priority. DRIVE MODE (STILL) Select the operation at the time the shutter is released, for example, self-timer or continuous shooting. To set the operation, open the Quick Set menu or select [ SHOOT] → [Drive Mode]. Single Capture (Default) Self Timer 2 sec. Continuous (High Speed) Self Timer 10 sec.
CAUTION The following functions or settings cannot be used in combination. HDR, Focus BKT, Fill Light BKT, Electronic Stabilization, Fill Light, ISO sensitivity settings added with the [Composite Low ISO Expansion] The maximum number of frames and speed of continuous shooting are as follows: (The upper rows show the maximum number of frames, the lower rows show the maximum shooting speed in continuous mode (frames per second)).
If you want to cancel the self-timer operation, please turn off the camera. INTERVAL TIMER It is possible to take pictures automatically at selected intervals. 1 Select [Interval timer] and press the button to display the Interval Timer setting screen. (When the button is pressed after selecting [Interval timer], the picture is taken with previously used settings.) ], and press the AEL button to To set from the Quick Set Menu, select [ display the Interval Timer setting screen.
Exposure value is measured at each interval shooting. If you wish to take pictures with the same exposure value, set the Exposure Mode to Manual Exposure or fix the exposure value by pressing the AEL Button before shooting. To terminate the interval timer shooting, press the Shutter button. WARNING The following functions or settings cannot be used in combination.
You can also select [ / SHOOT] → [Lens Function Settings] → [Lens Optical Stabilization] to set this function. ELECTRONIC STABILIZATION (CINE/STILL) For still image shooting, this function combines multiple images and generates an image with reduced camera shake. For movie shooting, this function generates a video with reduced camera shake while combining multiple frames before and after the target. CAUTION [Electronic Stabilization] cannot be simultaneously used with [Lens Optical Stabilization].
ISO SENSITIVITY SETTING You can set the ISO sensitivity for shooting. To set the ISO sensitivity, open the Quick Set menu or select [ SHOOT] → [ISO Sensitivity Settings] → [ISO Sensitivity]. / ISO Auto (ISO Auto) The sensitivity is automatically set depending on the brightness. (100 to 6400) (Default) ISO 100 to 25600 The sensitivity is fixed to each value. You can change the ISO sensitivity setting step.
COMPOSITE LOW ISO EXPANSION (STILL) This function allows you to take multiple images at one time, produce the same status as the automatic synthesis or low sensitivity shooting, and shoot photographs with rich gradation and noises reduced. ISO 6 - 80 ISO 6, 12, 25, 50 (for 1 EV step) An image equivalent to each level of sensitivity is obtained. CAUTION Image misalignment may occur when the subject is moving rapidly or when the shutter speed is slow.
ISO AUTO SETTINGS (CINE/STILL) Specify the lowest or highest limit of the ISO sensitivity in the ISO Auto mode as well as the lowest limit of the shutter speed (maximum shutter angle) in P and A mode. [ / SHOOT] → [ISO Sensitivity Settings] → [Auto Settings] ISO Lowest Limit 100 to 20000 (High ISO Expansion: Max.80000) ISO Highest Limit 125 to 25600 (High ISO Expansion: Max.102400) Shutter Speed Slowest Limit Auto (Faster) Auto (Fast) Auto (Standard) (Default) Auto (Slow) Auto (Slower) 1/8000 sec.
CAUTION When an image is underexposed even if the sensitivity is set in [ISO Highest Limit], it is shot at a lower shutter speed than the speed specified in [Shutter Speed Slowest Limit]. IMAGE FILE SETTING (STILL) Set the image quality, image size, and aspect ratio of still images. IMAGE QUALITY SETTING Set the format of record images or the image quality of JPEG images.
You can specify the memory bit count of DNG images. To set the value, select [DNG+JPEG] or select [DNG] → [DNG Quality]. Memory Bit Count 12 bit 14 bit (default) Setting to [14 bit] provides a rich gradation; however, continuous shooting speed becomes slow. TIP DNG (RAW format) is a record format based on the material properties. Development process by SIGMA Photo Pro, etc. is required. SIGMA Photo Pro can be downloaded free of charge from our website.
CAUTION The selectable image sizes are limited depending on the image quality setting. Image Quality 14 bit 12 bit 14 bit 12 bit Image Size 〇 × △ 〇: Available ×: Unavailable changed to 12 bits. 〇 × 〇 〇 × △ 〇 × 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 △: Available, however, the bit depth is ASPECT RATIO SETTING Set the aspect ratio of an image. Quick Set menu, or [ 21:9 16:9 SHOOT] → [Aspect Ratio] Aspect Ratio similar to those of wide screens used in cinema. Aspect Ratio the same as those of high vision TVs.
When shooting with aspect ratio other than 3:2, the frame is normally displayed in black. By making it semi-transparent, it is possible to use it as a sports finder which allows users to check the surrounding areas of the image. [ SHOOT] → [Outer Frame] Black (Default) Semi-transparent MOVIE RECORD SETTING (CINE) Set the record format, resolution, or frame rate of a movie. RECORD FORMAT Set the record format and quality of a movie. Quick Set menu, or [ [Format].
CinemaDNG cannot be used in combination with the following function. HDR, Electronic Stabilization If MOV is selected, [Compression] is displayed in [Record Settings]. Select the desired compression format. Data is compressed in frame units. The file size is enlarged, however, image degradation does not occur during editing. Compression format with the file size prioritized. Available for longer periods of shooting. ALL-I (All-Intra) GOP (Default) RESOLUTION Set the resolution (size) of a movie.
BIT RATE AND COMPATIBLE MEDIA The below table shows the correspondence between the movie bit rate and compatible media depending on a combination of video record settings. 〇: Available ×: Unavailable CAUTION Operation is not guaranteed for all media. CinemaDNG Resolution Bit depth 12bit 10bit UHD 8bit 12bit 10bit FHD 8bit Frame rate (fps) 23.98 29.97 25 23.98 29.97 25 23.98 59.94 50 29.97 25 23.98 59.94 50 29.97 25 23.98 119.88 100 59.94 50 29.97 25 23.
MOV Compression Resolution Frame rate (fps) UHD ALL-I FHD UHD GOP FHD 29.97 25 23.98 119.88 100 59.94 50 29.97 25 23.98 29.97 25 23.98 119.88 100 59.94 50 29.97 25 23.98 Bit rate (Mbps) 440 440 440 440 440 240 240 140 140 140 120 120 120 100 100 70 70 60 60 60 Compatible media SSD SD 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 For ALL-I recording, SSDs and SD cards with a writing speed of 60 MB/s or more are recommended.
Image circle of full size lens Image circle of APS-C size lens Full size image range To set the value, select [ APS-C size image range SHOOT] → [DC Crop Mode*]. / * "DC Crop (Super 35) Mode" is displayed in CINE mode. Off Records the full size image range. On Auto (Default) Records the APS-C size image range. The image range is switched depending on the attached lens. The DC Crop mode icon is displayed in DC Crop mode.
Combination of Image Quality・Image Size・Aspect Ratio results in approximate file size (MB) per image as follows. (The file sizes change depending on subjects.) DC Crop Mode [Off] Image Size [ ] Aspect Ratio Image Size 21:9 16:9 3:2 A Size (√2:1) 4:3 7:6 1:1 15M (6000×2576) 20M (6000×3376) 24M (6000×4000) 23M (5664×4000) 21M (5344×4000) 19M (4672×4000) 16M (4000×4000) Image Size [ Aspect Ratio 21:9 16:9 3:2 A Size (√2:1) 4:3 7:6 1:1 52.1 55.6 58.3 57.3 56.4 54.5 52.5 (12bit) 46.3 49.7 52.4 51.
DC Crop Mode [On] Image Size [ ] Aspect Ratio Image Size 21:9 16:9 3:2 A Size (√2:1) 4:3 7:6 1:1 6.3M (3840×1648) 8.3M (3840×2160) 9.8M (3840×2560) 9.3M (3616×2560) 8.7M (3408×2560) 7.7M (2992×2560) 6.6M (2560×2560) Image Size [ Image Size 21:9 16:9 3:2 A Size (√2:1) 4:3 7:6 1:1 3.2M (2736×1168) 4.2M (2736×1536) 5M (2736×1824) 4.7M (2560×1824) 4.4M (2416×1824) 3.9M (2112×1824) 3.3M (1824×1824) 19.7 21.1 22.2 21.8 21.4 20.6 19.9 4.6 6 7.1 6.7 6.3 5.6 4.8 2.5 3.2 3.8 3.6 3.4 3 2.6 1.9 2.5 2.9 2.
DIRECTOR'S VIEWFINDER (CINE) This function simulates how an angle of view is changed depending on the setting information of the registered cinema camera and the focal length of the attached lens. The pre-setting for using an anamorphic lens is also registered in this viewfinder. You can desqueeze a video squeezed with an anamorphic lens to display it. A movie is recorded based on the setting described in [Record Settings] (P.74) of the Set-up menu.
The below table shows the correspondence between the registered cameras and setting information. Brand Model Settings Brand Model ARRICAM / ANSI S35 4-Perf. ARRIFLEX ANSI S35 3-Perf. LF 16:9 LF 16:9 (x1.25) LF 16:9 (x1.3) ALEXA LF / LF 16:9 (x1.5) ALEXA LF 16:9 (x1.65) Mini LF LF 16:9 (x1.8) LF 16:9 (x2) LF 2.39:1 ALEXA 65 4K UHD ALEXA XT 16:9 DNxHD 16:9 ProRes HD 16:9 ProRes 2K 16:9 ProRes 3.
You can take a picture using the release button even when in Director's Viewfinder mode. (The setting of the recorded still image is the same as that of the still image recorded in CINE mode (P.45).) CAUTION Only when playback is done on this product, the simulation conditions specified at the time of shooting and the surround view information are applied, enabling you to check the effect.
AUDIO RECORD SETTING (CINE) Configure settings for sounds that are recorded simultaneously in a movie. To set this option, select [ Off On (Default) SHOOT] → [Audio Record]. No sounds are recorded for movie shooting. Sounds are also recorded for movie shooting. Gain Adjustment This function allows you to make a level adjustment while checking the currently input sound using the audiometer. SHOOT] → [Audio Record] → [On] → [Gain Adjustment] [ Auto (Default) The camera adjusts the optimal level.
EXPOSURE COMPENSATION If you want to intentionally overexpose or underexpose the picture, use this function. / SHOOT] → [Exposure Compensation] or use the Rear dial Select [ to set the compensation value. Exposure compensation can be set in 1/3 stop increments from +5.0 to -5.0 stops (When shooting a movie, ±3 EV is applied.). CAUTION The exposure compensation will not disable automatically. After taking the picture, set the compensation value to ±0.0 by rotating the Rear Dial.
Spot Metering The camera will measure the brightness only inside of the selected focusing point on the color LCD monitor. This mode is suitable when you wish to set exposure for a portion of the scene. AEL BUTTON The AEL button is available to do the shooting with the specified exposure in Auto mode. The AEL button can be assigned to the following functions in addition to the normal AE lock function. To set this option, select [ / SHOOT] → [AEL Button Settings].
WHITE BALANCE SETTING (WB) In general use, the white balance is adjusted automatically; however, if the desired colors are not obtained, you can configure a setting from the preset white balance. To set this option, open the Quick Set menu or select / SHOOT] → [White Balance]. [ Mode Auto (Default) Auto (Lighting Source Priority) Daylight Shade Overcast COLOR TEMP. - DESCRIPTION Adjusted automatically.
To set White Balance from Quick Set Menu, select preferred White Balance, and press the AEL button to display the White Balance Adjustment screen. 2 3 Press the buttons to adjust. B stands for Blue, A for Amber, M for Magenta, and G for Green. The image will be adjusted with colors in the movement direction. In each direction, adjustments can be made for up to eight steps. Press the button to apply the setting. To go back without changing the setting, press the button.
3 To confirm, press the press the button. button. To return without making any changes, White Balance can also be adjusted when setting the color temperature. Press the button to display the White Balance Adjustment screen on the Color Temperature Setting screen. Follow the instruction 2 and onwards in [ADJUSTING WHITE BALANCE] in the previous page. TIP Light source can be reddish or bluish, the color of light described as absolute temperature (K: Kelvin) is called “Color Temperature”.
3 Press the AEL button and import the custom white balance image. If a valid white balance settings was captured, the message "White balance image captured successfully" will appear on the color LCD monitor to indicate that the white balance image was captured successfully. If the capture was not successful, "Failed. Please retry the custom WB capture." will be displayed on the color LCD monitor. Press the AEL button to capture a white balance image once again. To dismiss the capture, press the button.
COLOR MODE It is possible to select the desired Color mode depending on the shooting conditions. In addition to the above settings, Monochrome photography or movie can be selected. To set the mode, press the [COLOR] button, or select [ [Color Settings] → [Color Mode] (in CINE mode, select [ [Color Mode]). STD. Standard (Default) VIVID Vivid NTR. Neutral PORT. Portrait LAND Landscape CINE Cinema T&O Teal and Orange Sun R. Sunset Red For G. Forest Green Fov B. FOV Classic Blue Fov Y. FOV Classic Yellow MONO.
The selected color setting icon is displayed. TIP In SIGMA Photo Pro, Monochrome mode is designed for DNG data capture using MONO. Sigma Photo Pro can convert Monochrome DNG images into color. (JPEG data cannot be returned to a color image.) CAUTION In MONO. (Monochrome) mode, if an option other than [B/W] (B&W) is selected for [Toning Effect] in [COLOR MODE DETAILED SETTING] (next section), you can adjust the effect.
B/W B&W (Default) BG Blue Green R Red B Blue WARM Warm Tone COLD Cold Tone SEPIA Sepia BP Blue Purple G Green P Purple 1 Press the AEL button while the Color Mode Setting screen is being displayed, and open the Color Mode Detailed Setting screen. Pressing the button temporarily stops the currently displayed screen, enabling you to make adjustments while checking a still image. To restart, press the button again.
Tone Control: Off Tone Control: Strong To set the Tone Control, press the TONE button or select [ → [Tone Control]. / SHOOT] Off Disables the effect. Auto (Mild) (Default) Mild effect can be achieved. Auto (Strong) Strong effect can be achieved. Individually adjusts highlight or shadow. Manual MANUAL (Up to ±5 in 1-step increments) Off Pressing the AEL button temporarily stops the currently displayed screen, enabling you to make adjustments while checking a still image.
TO CONFIRM THE EFFECT... Press the AEL button while the Fill Light Setting screen is being displayed, and open the preview screen (still screen). To release the preview screen, press the AEL button again. CAUTION The following functions or settings cannot be used in combination. HDR, Drive Mode: Continuous, Interval Timer, Bracketing (Except Fill Light BKT.
2 Press the AEL button to open the preview screen (still screen). 3 Use the buttons to select [Red] or [Blue], and use the apply the setting. or button to 4 Use the button to set the adjustment value (up to ±1.0 in 0.2-step increments), and use the button to apply the setting. TIP The adjustment value is stored in the camera, and called if the adjusted lens is attached.
To erase a memo, delete all characters on the Enter Memo screen. TO RESET COMPENSATION... 1 Select [ / SHOOT] → [Lens Optics Compensation] → [Color Shading], select the column to reset, and press the MODE button on the Compensation Capture screen. 2 Select [Yes], and press the button to apply the setting. (This erases the compensation value and lens information.) CAUTION When [CinemaDNG] is selected as the format of CINE mode, Color Shading Correction is not available.
2 Press the button to select [On], and press the button to open the Further Options screen. (If you press the button while [On] is selected, shooting is performed with the previous setting value.) 3 Select the option you want to change on the Further Options screen. Then, press the button or the button to open the sub menu. EXPOSURE BKT By setting the exposure judged as appropriate by the camera, it is possible to continuously take pictures with the exposure bracketed.
When the exposure mode is set to M, only the shutter speed will be changed. (When [ISO Auto] is selected, ISO varies. BKT can be combined with exposure compensation. Bracketing is performed based on the compensation value specified in Exposure Compensation. You can check the shooting frame using the bar indicator of the icon.
Continuous shooting cannot be simultaneously used with other functions. WHITE BALANCE BKT In a single shooting, several images with different white balances can be recorded. (Blue ↔ Amber) (Magenta ↔ Green) Bracketing Number The number of shots to be recorded (three or five) Bracketing Amount In 2-step increments up to ±16 EV Bracketing Axis 4 Use the buttons to select a desired value, and press the button or the button to apply the setting.
COLOR MODE BKT In a single shooting, several images with different color modes can be recorded. BKT1 to BKT5 Currently-set Color Mode. (This setting can be changed using the same procedure.) Up to five Color Modes to be saved in a bracket can be selected. 4 Select from BKT1 to BKT5 by using the button. buttons and press the 5 From the list at the bottom of the screen, select the Color Mode to be allocated by using the buttons and press the button to confirm your selection.
3 To return to the color mode BKT screen, press the twice. button once or Fill Light BKT This function allows you to continuously take photographs with the Fill Light effect increased or reduced based on an image with no Fill Light effect applied. Bracketing Number Number of shots (three or five) Bracketing Amount In 0.2-step increments up to ±5 EV 4 Use the buttons to select a desired value, and press the button or the button to apply the setting.
[Auto] is the setting in which the camera automatically determines a range of exposures. When the setting is completed, the setting icon is displayed. CAUTION HDR will not be canceled automatically. After taking pictures or recording movies, be sure to turn the HDR back to [Off]. For still image shooting, an image misalignment may occur when the subject is moving rapidly or when the shutter speed is slow.
SAVE THE CUSTOM MODE SETTING 1 Set the above settings to your desired combination. 2 Select [ SYSTEM] → [Custom Mode Setting], and press the buttons to select C1, C2, or C3. Then, press the button. A confirmation dialog will appear. 3 Select [Yes] with the buttons and press the setting. button. To cancel, select [No] and press the button to apply the CAUTION When the new setting is saved, the previous stored setting will be overwritten.
LOCK FUNCTION This product provides the lock function that locks button operations and allows the user to concentrate on shooting without being bothered by erroneous button operations. The lock on/off function must be assigned to the Quick Set menu. Assign [Lock] in Custom QS (P.37). LOCK To lock, select [Lock] in the Quick Set menu, and press the AEL button. While the lock function is active, the bottom of the screen. icon is displayed at the UNLOCK Slide from the left to the right on the touch panel.
The flash tuning speed is set to 1/30 sec. or less (1/15 sec. or less when the image quality is set to DNG and DNG + JPEG and the memory bit count is 14 bits). When shooting with the flash using manual exposure, set the shutter speed to 1/30 sec. or less (1/15 sec. or less). FLASH MODE SETTING Some items of the external flash can be set from the camera side. To set the flash mode, select [ SHOOT] → [Flash].
CAUTION The Flash Mode cannot be set if a flash is not attached to the camera, or the flash is turned off. FLASH EXPOSURE COMPENSATION It is possible to compensate the flash output level without changing the background’s exposure. To set the Flash Exposure Compensation, select [ [Flash Exposure Compensation]. SHOOT] → [Flash] → Select the desired compensation value by using the buttons. Exposure compensation can be set in 1/3 stop increments from +3.0 to -3.0 stops.
SHOOT] → [Color Settings] → [Color Space]. [ sRGB (Default) AdobeRGB When reviewing images recorded in Adobe RGB, their Folder numbering / File numbering will be underlined. CAUTION Please set the color space to sRGB for regular usage. Use the image set to Adobe RGB under the environment compatible with Adobe RGB. LENS FUNCTION SETTINGS The lens function items are compiled in [Lens Function Settings] of [ / SHOOT]. Focus Mode (Refer to P.52.) Focus Limiter (Refer to P.58.
FRAME GUIDE (CINE) This function displays a frame of a different ratio on the LCD monitor. Display Format Select the frame display format. White Line (Default) Shows a frame using a white line. Darkly masks an area outside a frame in SemiSemi-transparent Transparent mode. Frame of available ratios (On/Off) 1.33:1 1.85:1 Multiple frames simultaneously. 2.39:1 can be displayed SWITCH DIAL FUNCTIONS This function allows you to reassign the Front/Rear dial when shooting.
buttons to select [Original] or Select the target item. Then, press the [Reverse], and press the button to apply the setting. REC BUTTON SETTINGS (STILL) You can prevent the REC button from being activated in STILL mode. Off REC SHUTTER BUTTON SETTINGS (CINE) You can change the function of the shutter button in the CINE mode. Off Shutter REC HALF-PRESSED AEL (STILL) Select whether or not to fix the exposure when the shutter button is half-pressed.
REVIEWING AND DELETING IMAGES VIEWING ONE IMAGE AT A TIME Press the button to display an image on the LCD monitor. For a movie file, the first frame is displayed. A cinemagraph (GIF image) is looped for playback.
TIP To scroll through images more quickly, press and hold the buttons. Images will advance automatically until the button is released. The first and last recorded images on the card are linked. Pressing the button while the first image is displayed brings up the last recorded image on the card. Pressing the button while the last image is displayed brings up the first recorded image on the card. If there are no images on a memory medium, the error message "No files on memory media." will be displayed.
TIP Images are magnified based on the position of the focus point during shooting. VIEWING NINE IMAGES AT A TIME (CONTACT SHEET VIEW) Images can be viewed in a "contact sheet" of nine thumbnail images. While reviewing an image, rotate the Front Dial counter-clockwise. WHILE IN CONTACT SHEET VIEW: Press the buttons to select other thumbnail images. When you rotate the Front Dial clockwise, the selected thumbnail image is played back.
The Image Information screen has three pages. To switch pages, press the buttons or flick (drag) up and down on the touch panel. 1/3 2/3 3/3 1 2 3 4 5 6 7 Same as single-image playback [Display Date and Time].
For movies, the recorded time appears below File Size. For cinemagraphs (GIF images), the playback time and playback speed appear below File Size. IN IMAGE INFORMATION VIEW: Rotate the Rear Dial to display the previous or next images. Display the previous or next image by pressing the buttons or flicking (dragging) right or left. Press the button to change the display mode (P.39).
HISTOGRAM The histogram is a graphic representation of the distribution of brightness in a picture. The horizontal axis shows the tone values from black (left) through gray to white (right). The vertical axis corresponds to the number of pixels at each brightness level. Accessing correct image exposure can be achieved by examining a histogram of the image.
CAUTION If the file is already locked, the confirmation message, "This file is locked." appears. The file is prevented from being deleted. If you want to delete the file, unlock it. (Refer to pages 120 to 122.) Images recorded in DNG+JPG will be deleted along with DNG and JPEG images. DELETE FILES FROM THE DELETE MENU You can delete a single file or multiple files. 1 Choose your desired option by selecting [ PLAY] → [Delete]. Select Files Select multiple files to delete.
PLAYING BACK A MOVIE button or tap the When you press the icon on the touch panel while a movie file is being displayed, a movie is played back. Operation guide Playback lapse time 00:14:57 Total recording time 08:46:23 DURING MOVIE PLAYBACK Button/Dial Front/Rear dial Operation Pause Fast-forward playback Fast-backward playback Fast-backward playback ↔ Fast-forward playback The playback speed increases each time the button is pressed or the Front/Rear dial is turned clockwise.
VOLUME ADJUSTMENT To display the volume setting guide, press the button while a movie is being displayed. Use the to adjust the volume, and use the button to apply the setting. CUTTING OUT A PHOTO FROM A MOVIE You can create a photo of the desired frame from a movie file. 1 Play back a movie, and temporarily stop it in the target frame. If you failed to stop in the desired frame, use the button or the Front/Rear dial in Pause mode to perform frame-by-frame playback.
OTHER REVIEWING FEATURES FILTER FILES TO DISPLAY You can filter the file types to play back. To set this option, select [ Display]. Display All (Default) OFF Still Images Only PLAY] → [Filter Files to Movie Clips Only GIF Images (Cinemagraph) Only LOCK Locking protects files from being accidentally deleted. WARNING Formatting a card erases locked files. Review card contents carefully before formatting. TIP Locked files have a "read-only" status when viewed on a computer.
A key icon file is locked. will appear in the file indicating that the TIP If the file is already locked, the menu item changes to [Unlock]. To unlock a locked file, select the locked file and follow the same steps as above. The AEL button can be set as a shortcut button for locking files (see page 132). TO LOCK MULTIPLE FILES 1 Choose your desired option by selecting [ Select Files Lock Lock All PLAY] → [Lock]. Select multiple files to lock.
TIP To unlock multiple files, select [Unlock All] or [ Menu. Unlock] in the Lock MARKING IMAGES Marking images is a convenient way to identify favorite images, select images to be displayed as a slideshow, or select images to be deleted. TIP Images marked on the camera remain marked when viewed in SIGMA Photo Pro. TO MARK A SINGLE IMAGE 1 Display the images you want to mark and select [ 2 PLAY] → [Mark]. Select [Mark] from sub menu. 3 Press the button or A button.
TO MARK MULTIPLE IMAGES 1 Choose your desired option by selecting [ Select Files Mark All PLAY] → [Mark]. Select multiple files to mark. Use the buttons to display the file to mark and use the buttons to display icon. Repeat this until you have specified files you want to mark. Mark all images on the card. 2 A confirmation dialog will appear when you press the 3 Select [Yes] with the buttons and press the setting. button. To cancel, select [No] and press the A key icon button.
2 Choose the desired rotation direction from sub menu. Rotate Rotates the image 90 degrees clockwise. Rotate Rotates the image 90 degrees counterclockwise. CAUTION You cannot select the Rotate menu if [Image Rotation] in [ set to [Off]. PLAY] is TIP To rotate an image 180 degrees, rotate it twice in the same direction. To get an image back into its original orientation, rotate it in the opposite direction. The AEL button can be used as a shortcut key for rotating images (see page 132).
SLIDESHOW The Slideshow feature allows you to show all images on the card or selected images in an automatic playback mode. 1 Select [ PLAY] → [Slideshow] and then choose [All Files], [Locked Files], or [Marked Files]. 2 Press the or button to start Slideshow. To stop in the middle of the slideshow, press the button. A movie or cinemagraph (GIF image) is played back once, and the display moves to the next file. If the playback view filter (P.
DNG DEVELOPMENT Without using a PC, it is possible for the camera to develop JPEG images from images recorded in DNG. 1 2 3 4 5 6 7 8 9 10 11 12 Exposure Compensation (P.85) White Balance (P.87) Image Quality (P.71) Image Size (P.72) Aspect Ratio (P.73) Color Mode (P.91) Color Space (P.107) Tone Control (P.93) Fill Light (P.94) Lens Optics Compensation (P.95) Icon to start image development Description of selected icon 1 Display the DNG image you want to develop and select [ Development].
3 While checking the image, use Front or Rear Dial or buttons to change the adjustment value (or option). Then, press the to accept your change. 4 Repeat Step 2 and 3 in case there are multiple items to change. 5 After finalizing the setting, select and press the button. (the Process RAW Development icon) 6 Select [Yes] with the buttons and press the setting. To cancel, select [No] and press the button.
CINEMAGRAPH You can create a GIF animation in which only a part of a file is moving, from a movie file. CINEMAGRAPH EDIT SCREEN 1 Select [ 2 1 2 3 4 5 6 7 8 9 10 Selecting Start Frame Selecting End Frame Selecting Still Image Frame Masking Area Playback Speed Bounce Exposure Compensation Color Mode Save as GIF File Selected item PLAY] → [Cinemagraph] → [New]. Select a movie you want to create as a cinemagraph, and press the button. Message "Now Processing...
5 Specify a still image frame. (Use the button to select , and press the button. In the same way, temporarily stop the movie to be still image in the target frame, and press the button.) If you press the AEL button during Pause mode, the movie returns to the starting frame. If you press the AEL button during playback, the movie returns to the starting frame, and stops temporarily. A still image frame can also be specified outside the starting or ending frame if it is included in the same file.
7 When the brush work is completed, press the following settings as needed. Playback Speed Bounce Exposure Compensation Color Mode button. Configure the 0.5x to 2.0x [Off] : Not done. [On] : Done. Max. ±1EV levels in 0.3EV-step increments Refer to P.91. 8 Select (Write GIF File icon), and press the and press the button to apply the setting. button.
When creating a cinemagraph of another version from the same movie file, begin with [New] and then proceed with the subsequent procedure. It is convenient to begin with [Edit] when you want to make a minor change (to change the viewing speed). DELETING AN EDITED FILE Delete an unnecessary edited file. 1 Select [ 2 PLAY] → [Cinemagraph] → [Delete Edit File]. This only displays the movie files with an editing history.
IMAGE ROTATION This function allows you to change the orientation of an image shot at a vertical position or an image rotated to a vertical position. To set this option, select [ Off On (Default) PLAY] → [Image Rotation]. Displays an image at the horizontal position. Displays an image at the vertical position. AEL BUTTON SETTINGS The playback menu function can be allocated to the AEL button. Allocating frequently used functions allows you to perform operations easily using one action.
SETTING FROM THE [SYSTEM] MENU This section describes settings that can be configured in the items of [ SYSTEM]. MEMORY MEDIA FORMAT Refer to "Card Format" (P.42). (To initialize the USB storage, perform the same procedure as [USB Storage].) MEMORY MEDIA When two memory media are set, select the recording or playback target from this item. SD Card USB Storage FILE NAME / NUMBER (CINE/STILL) The recorded data is assigned to the dedicated file name and file number for both still images and movies.
When [Adobe RGB] is selected in [ SHOOT] → [Color Settings] → [Color Space], "SDIM" of the file name is set to "_SDI", and "FP00" to "_FP0". File Numbering The file numbering can be changed. Continuous (Default) Sequential numbers are assigned. If memory media are changed, numbers will be passed on. Auto Reset Once a memory medium is changed or initialized, numbers are reset.
Reel Number "001" (default) to "999" are assigned to the reel number. CAUTION When the reel number reaches "999", even if the card or storage has sufficient space, the message [Unable to allocate file number for movie clips…] is displayed, and it will not be possible to take any more pictures. In such a case, change the camera ID or reel number. COPYRIGHT INFORMATION When shooting you can record [Photographer] information, [Copyright] information, and memo in the Exif data.
ENTERING INFORMATION Entered information area It is possible to move the cursor in the area using the front/rear dials. Keyboard area Move the cursor in this area using the buttons. 1 Select the desired character in the Keyboard area, and press the button to enter it. Switch the keyboard to alphabet. When the alphabet is displayed, it is possible to select capital and lowercase letters. Switch the keyboard to symbols. Insert a 1 character space. 2 Select and to finalize the entered information.
CAUTION This product does not provide the function that synchronizes with an external device. Time Code Set the starting time of the time code. 00 : 00 : 00 : 00 Hour : minute : second : frame To reset, press the button. When the frame rate is set to 23.98 fps, the frame can be specified only using a multiple of four. For other frame rates, the frame can be specified between 0 and 29.
SHOOTING STYLE (CINE) Refer to page 43. CUSTOM MODE SETTING Refer to page 103 CUSTOM QS (CINE/STILL) Refer to page 37. DISPLAY MODE SETTINGS (CINE/STILL) Size of icon displayed during shooting can be changed, and useful functions to enhance photography can be added. The CINE mode (STILL-like style) and STILL mode provide the common settings. To display options, set the mode (Custom 1 to 4) to customize to [On], and press the button. Set the modes that you do not want to display to [Off].
Lens Info (CINE) You can display the information on the lens attached to your camera. Off Focal Length Focus * Focal Length + Focus * * You can select the unit of the shooting distance. Press the select the target on the [Focus Distance Scale] screen. M (Meters) button to FEET Date / Time You can display the date and time. Off Date Time Date + Time TC / Duration (CINE) Displays the TC (time code) or recording time.
Center Mark (Off / On) (CINE) You can display the center mark that identifies the center of the screen. Electronic Level (Off / On) An electronic level that is useful for determining composition can be displayed. ELECTRONIC LEVEL Camera’s horizontal direction and vertical direction are displayed. Vertical direction guide Horizontal direction guide When the camera is horizontal or vertical, the guide becomes green. When shooting vertically, the display changes to one for vertical shooting.
OPERATION IN LOCK MODE Refer to page 105. TOUCH OPERATION Refer to page 27. ELECTRONIC SOUNDS Set whether or not to use electronic beeping sounds, and adjust their volumes Shutter Volume REC Volume AF Volume Timer Volume Select the desired option. To reduce the volume, press the button, and to increase it, press the button. Then, press the button to apply the setting. It is possible to set the volume from 0 to 5 in six increments. Setting 0 results in no sound. The default setting is 3.
PIXEL REFRESH If a bright point is recorded in an image, use pixel refresh. This optimizes shooting elements and image processing. Close the cap, select [Yes], and press the button to apply the setting. LCD SETTINGS You can adjust the brightness and hue of the LCD monitor. Brightness (LCD Brightness) Press the button to adjust to the brightness to the appropriate value, and press the button to apply the setting.
LCD Off Option Off 1 min. (Default) 10 sec. 5 min. 30 sec. 10 min. Auto Power Off Option Off 5 min. (Default) 30 sec. 10 min. 1 min. It is not possible to set [LCD Off] for a longer time than [Auto Power Off]. ECO MODE The LCD monitor is darkened to reduce battery use when the camera has not been operated for eight seconds.
Recorded Image Output When recording a video on an external recorder connected using an HDMI cable (sold separately), specify the resolution and frame rate in this item. HDMI Recorded Image Output Resolution Set the resolution (size) of a movie. UHD (Default) FHD 3840 x 2160 1920 x 1080 Frame Rate Set the frame rate (the number of frames per second). 23.98 fps 25 fps 29.97 fps 50 fps 59.94 fps 100 fps 119.88 fps USB MODE Set the communication method when a USB cable is connected.
CABLE RELEASE SETTINGS (CINE/STILL) Set operations to use the cable release switch CR-41 (sold separately). Shutter REC Provides the same operations as the shutter button of the camera. Provides the same operations as the REC button of the camera. DATE / TIME Refer to page 25. Language / 言語 Refer to page 24. INFORMATION 1st page You can confirm the model name, serial number, firmware version, continuous operation time (from the power-on time to the present time), and sensor temperature.
RESET SETTINGS Restores camera settings to the default. 1 Select the desired reset method from [Reset Settings]. Reset Capture Settings Resets all the items in [ Reset Play Settings Reset System Settings Reset All 2 Select [Yes] and press the Resets all the items in [ / SHOOT]. PLAY]. Resets all the items in [ SYSTEM ], excluding [Date / Time] and [Language / 言語]. Resets all the items, excluding [Date / Time]. button to apply the setting.
WARNING If the computer enters Sleep mode during processing, the currently transferred data may be damaged. Configure a setting to prevent the computer from entering Sleep mode. Please use only the dedicated USB cable that is supplied with this product. Using another cable may cause a failure. The Auto Power Off function does not work while the USB cable is being connected. REFERENCE This section provides the optional accessories and the camera specifications.
HAND GRIP HG-11 This is an easy-to-handle compact grip that is easy to hold when a small lens is attached. This is considered so that the design matches fp. HG-21 HAND GRIP This is a large grip that provides greater operability and that allows the user to hold it securely even when a telephotographic lens such as 135mm F1.8 DG HSM is attached. BASE GRIP BG-11 When it is attached to the camera’s tripod socket on the bottom surface of the camera, it allows handgrip-style shooting.
USING A HOME POWER SUPPLY (sold separately) You can power the camera from a wall outlet using the AC adapter set SAC-7P (sold separately). 1 Connect the AC cable to the AC adapter. 2 Open the Battery Cover, and open the DC connector cover as shown in the illustration. Do not pull too hard on the DC connector cover as it may come away from camera body. 3 Insert the DC connector as shown in the illustration until it is locks into place.
WARNING When the access lamp is lit, take extreme care to prevent the jack from becoming disconnected. Otherwise, the camera will turn off and the written data will be lost. When you have finished using the camera, please turn off the camera and disconnect the plug from the wall socket. After taking the DC connector off from the camera body, close the DC connector cover as shown in the illustration.
WARNING Do not use an aerosol compressed air cleaner. Liquid squirts depending on the injection angle, which may damage the dust protector. Please do not use the blower with a brush. If a brush is attached, it may scratch the dust protector. HOW TO STORE THE CAMERA If you intend to store the camera for a long time, remove the battery. To avoid growth of fungus, store the camera and lens in a dry, cool and ventilated place, with a drying agent such as silica gel.
TROUBLESHOOTING If you have a problem with your camera or cannot take good pictures, consult the list below as you check the camera before requesting repairs. Nothing is displayed on the color LCD monitor. Battery is exhausted. ► Replace the battery. (P.20 - 22) Camera is in LCD Off mode (P.142). ► Press the shutter button “half-way” or any other button. The shutter does not release. The camera is busy writing to the card. ► Please wait until the card busy light goes off. Card is full.
The camera has turned off automatically. Auto Power Off is activated. ► The Auto Power Off function is set in order to conserve battery power. If it is inconvenient, please set the Auto Power Off to “Off”. (P.142) Cannot shoot or store images. Card is full ► Insert a new card or delete unwanted images. (P.116 - 117) Battery is exhausted. ► Replace the battery. (P.20 - 22) The write protection switch is in the ‘LOCK’ position. ► Please unlock the write protection switch on the card. (P.
The AF/M switch on the lens body is set to M. ► Set the AF/M switch on the lens to AF. (P.51) Camera shake is occurred. ► Increase the ISO sensitivity or use a tripod. (P.68) White or colored dots and haze appear on a part of the image. Due to the camera facing a strong light source, ghosting and flare appear on the image. ► Strong light source may cause ghosting and flare.
SPECIFICATIONS Type Type Memory Media Lens Mount Type Camera effective pixels / Total pixels Aspect Ratio Color Filter System Interchangeable-lens Digital Camera SD / SDHC / SDXC memory card (UHS-II supported) / Portable SSD (USB 3.0 connection, USB bus power supported) L-Mount 35 mm full size (35.9 mm x 23.9 mm) Back-illuminated CMOS sensor Approx. 24.6MP (6,072 x 4,056) / Approx. 25.3MP (6,104 x 4,142) 3:2 RGB primary color filter Lossless compression RAW (DNG) 12 /14 bit, Still Image File JPEG (Exif2.
Movie Recording Format HDMI External Output Focus Exposure Control 156 HDMI throughout * External recorder record: Atomos Ninja Inferno, blackmagic Video Assist 4K supported Audio Format Linear PCM (2ch 48 kHz/16-bit) 3840 x 2160 (UHD 4K) / 4:2:2 8bit 29.97p / Recording Pixels / 25p / 23.98p Frame Rate 1920 x 1080 (FHD) / 4:2:2 8bit 119.88p / 100p / 59.94p / 50p / 29.97p / 25p / 23.
AE Lock Exposure Control Exposure Bracket Image Stabilization System White Balance Shutter Type Shutter Speed Drive Mode Monitor Format/Field Rate Touch Panel Light Emission Mode Flash Mode External Flash Flash Exposure Compensation Flash Tuning Speed External Flash Support Half-press the shutter button, or press the AEL button.
Color Mode CINE Mode STILL Mode During Movie Playback During Still Image Playback Built-in Microphone, Speaker Other Functions 12 types (Standard, Vivid, Neutral, Portrait, Landscape, Cinema, Teal and Orange, Sunset Red, Forest Green, FOV Classic Blue, FOV Classic Yellow, Monochrome) Still image shooting during movie shooting, HDR Shooting FillLight function, HDR Shooting Cinemagraph/still image cut-out In-camera DNG Development Stereo microphone, Monaural speaker English / Japanese / German / French / Sp
External Dimensions Weight Outer Diameter Weight Available Operating Temperature Environment Available Humidity 112.6 x 69.9 x 45.3 mm 422 g (including battery and SD card) 370 g (Camera body only) 0 to +40°C Max. 85% (No dew condensation) * The specifications are subject to change without prior notice. AC Adapter UAC-11 Input: 100V to 240V Output: 5.0V 1.8A 50/60Hz 0.25A Li-ion Battery BP-51 Lithium-ion rechargeable battery Voltage: 1200 mAh Voltage capacity: 7.
fp Tested To Comply With FCC Standards FOR HOME OR OFFICE USE SIGMA CORPORATION OF AMERICA 15 Fleetwood Court, Ronkonkoma, NY 11779, U.S.A. TEL: 631 585 1144 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For customers in the U.S.A.
