User guide

LBA-USB User Guide Document No: 11294 Page 13
Instrument
Characteristics
USB L11058
35mm Format
USB SP503U
½” Format
USB SP620U
1/1.8” Format
Spectral Response 250-1100 190 – 1320 nm 190 – 1320 nm
Maximum Beam
Size
20 x 13.5 mm 6.5 x 4.8 mm 7.1 x 5.4
Pixel Spacing 9.9 μm x 9.9 μm 4.65 μm x 4.65 μm 4.40 μm x 4.40 μm
Number of
Effective Pixels
4006 x 2672 1392 x 1040 1600 x 1200
Minimum System
Dynamic Range
59 dB 63 dB 60 dB
Spatial Uniformity ±0.5%
Frame Rate
3.5 fps at full
resolution, higher
rates with binning &
smaller ROI
30 fps at full
resolution
8.3 fps at full
resolution
Photodiode Trigger N/A
Optional photodiode trigger available: P/N
SPZ17005
Lowest Measurable
Signal
TBD nW/cm
2
.5 nW/cm
2
2.5 nW/cm
2
Saturation
Intensity
TBD μW/cm² 1.3 μW/cm² 2.2 μW/cm²
Damage Threshold 0.15 mW/cm
2
Operation Mode Interline transfer progressive scan CCD
PC Interface USB 2.0
Note: All specifications subject to change without notice.