714PC

Operator’s Manual LBA-PC

254

down.

When in local control mode, any remote logging (:LOG) or synchronization (:SYC) is disabled, or

cannot be enabled. The remote logging state is stored in the configuration. Remote logging is

automatically re-enabled when the LBA-PC is returned to remote mode and the file name is FRM,

RDD, or RDR.

:LOC

Returns:

LOC

A.5.4.9 ORG - set manual origin to cursor location

This command is valid only when origin is set to manual (see :DIS).

:ORG

A.5.4.10 PAL? - read color palette

This command retrieves the color palette currently used to display the beam on the LBA-PC. The

LBA-PC uses a base palette of 128 colors to display pixels in the range of 0 to 255.

:PAL?

Returns:

PAL #3384(RDAB)(GDAB)(BDAB)…(RDAB)(GDAB)(BDAB)

Where:

# = pound symbol

3 = number of digits to follow

384 = number of data bytes to follow

(RDAB)(GDAB)(BDAB) = 24 bit red, green, blue color value

A.5.4.11 PAN - pan left/right/up/down

:PAN <configuration>

Key Type Value Description

X I new upper left corner [+|-]x

-x = move left by x

x = new location - see :PNW? for limits

+x = move right by x

C = center horizontally

Y I new upper left corner [+|-]y. Note that the

top is 0 and y values always increase going