Instruction manual
39
11.4 RHF circuit function setting menu
This menu can be used to assign the HF relays (16 address
2
maximum).
To go to the SIGMA relay setting menu,
validate the option in the technician menu
with the key,
The following screen is displayed :
Assign the RHF circuits to melody, relay or
—- (not present) mode, MEL, REL, or, —-.
The RHF circuits are declared from 60 to 75.
2 Remark: several relays can be congured on the same address (for example for the
same external lighting control).
RHF Circuit ok
Function setting õ
CIR.RHF:60 > MEL ô ú
ok
CIR.RHF:60 > REL ú
ok