Instruction manual
41
LENGTH starts the relay in ON mode during
the programming period HH MM SS; pressing
Enter places the circuit in stop mode.
FORCED ON: forces the relay position
whatever the programming (as in test mode);
1st pressing ON, 2nd pressing OFF.
A switch can be placed on the output to
congure the status of the input as ON or OFF permanently.
The following screen can be used to activate
or deactivate the idle screen backlight (by
default, the backlight is lit, therefore value set
to No).
11.6 “Delete all programming” menu
This menu can be used to delete all the programming.
To go to this SIGMA menu, validate the
option in the technician menu with the
key,
The following screen is displayed :
To delete, validate with the key,
Ext.input: CIR.01 ú
START ok
Ext.input: CIR.01 ú
LENGTH HH:MM:SS ok
Backlight off : NO ú
ok
Delete programing ok
Update syst. soft õ
Delete all prog:Yesú
ok
Confirm delete ok
all programs C