User`s manual

67
IMAGE PARAMETER AND COLOR SPACE
It is possible to adjust the recording image parameter (contrast, sharpness
and saturation) and select the color space.
Contrast
Contrast can be increased by moving the cursor to + side or decreased,
preserving image detail, by moving the cursor - side.
Sharpness
It is possible to make the pictures appear sharper, by moving the cursor to + side,
or softer by moving the cursor to – side,.
Saturation
It is possible to increase saturation thus making pictures appear vivid, if the
cursor is moved to + side. Moving the cursor to – side, decreases saturation and
makes images less vivid.
Color Space
It is possible to select sRGB, which is a common color space or Adobe RGB,
which is mainly used for commercial printing, and other industrial purposes.
1
Press the button on the back of the
camera to access the setup menu. (P. 28 )
2
Press the button on the 4-way controller
to select [Picture Settings].
3
Press the button on the 4-way controller or the button to open the sub
menu.
4
Use the button to select the desired parameter from the sub menu.
5
Use the button on the 4-way controller to select the desired value.（In the
case of the color space, use the
button on the 4-way controller to select
sRGB or Adobe RGB）.
6
Press the button to confirm the setting.
• JPEG is compressed after parameter adjustment. In the case of RAW format,
parameter information is recorded without adjustment. It is possible to re-adjust
RAW images using the supplied Sigma Photo Pro software.