3.0 DATA CENTER FOR TOPLINE 2009/2012, THE ROX SERIES and running watches www.sigmasport.
SIGMA Data Center 3 Contents 1 Foreword. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 DATA CENTER 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SIGMA Data Center 3 Contents 6.6.4 Selecting the values for the chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 6.6.5 Editing a break . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SIGMA Data Center 3 2 Data Center 3 The DATA CENTER 3 software enables you to evaluate your SIGMA device’s data on a computer or MAC. There are three types of data: – Memory – LOGs – Device settings Note: For information about which data your device provides, please see your device’s operating instructions. To optimally use this data with the software, we recommend that you use an optionally available docking station. This enables you to directly transmit the data between your device and DATA CENTER 3.
SIGMA Data Center 3 2.2.2 MAC computer The following software and hardware is required to use DATA CENTER 3: – Intel Core™ Duo or a faster processor – 512 MB RAM (1 GB recommended) – MacOs X Version 10.6 or 10.7 2.3 Installing the software 2.3.1 Installation on a Windows computer 1 Before starting the installation, close all running applications. Start the file DataCenter_3.exe. 3 Follow the on-screen installation instructions. 4 Start the application. 2 2.3.
SIGMA Data Center 3 2.4 Activating the software Activation is only required once per installation and can occur automatically (recommended) via the Internet. If your computer does not have an Internet connection, activate the software manually. You can use all the DATA CENTER 3 functions without activating it but will only be able to start the software 20 times. After that, it must be activated. The activation is always valid for the current operating system.
SIGMA Data Center 3 2.5 Connecting the docking station A docking station is available for many SIGMA SPORT devices. Depending on the device, the docking station either comes with the product or can be purchased as an accessory. The docking station enables you to transmit the values from your SIGMA device to DATA CENTER 3 and copy device settings. You can connect the docking station to your computer via a USB interface.
SIGMA Data Center 3 2.5.3 Retrospectively using a docking station Docking stations are available for many SIGMA devices from specialist retailers or at www.sigma-data-center.com. The docking station drivers are automatically installed when you install DATA CENTER 3. If you have previously used your keyboard to enter your training data for your SIGMA device, this will not be lost. The new data that you now import using the docking station will be assigned to the manually created device.
SIGMA Data Center 3 3 Quick start guide The quick start guide provides experienced computer users with the key information about DATA CENTER 3. It guides you through the evaluation process in five steps, describes the interface structure and explains the important icons and functions. 3.1 Evaluation in five steps Without a docking station With a docking station Start the software. 2 Manually create the Sigma device. 3 Manually enter the values. 4 Select the training session.
SIGMA Data Center 3 3.2 Interface description Area functions Menu Dashboard with the data of the connected SIGMA device Area displaying values The example shows the dashboard with a connected ROX 9.0 Dashboard 3.3 Key terms, icons and functions 3.3.1 Functions for all Sigma devices Back Go back to the previous page. Import data from file Import a file with training data or device settings. Export selected data Export device settings or training data as a file.
SIGMA Data Center 3 3.3.2 Functions for devices with a LOG function Special functions are available for evaluating LOGs. Drag elements The drag elements can be dragged and dropped into the upper and lower content areas (drop zone) to create the interface. Target and intensity zone The evaluation is displayed in table format plus as a pie chart or bar chart. Values Drag and drop a value table into the content area (drop zone). Chart Drag and drop a chart into the content area (drop zone).
SIGMA Data Center 3 4.1.1 With a docking station The docking station connects your SIGMA device to the computer. – Import the memory or LOGs into DATA CENTER 3. – Manage the device settings in DATA CENTER 3 and transfer these to your SIGMA device. How to create a new device with a docking station: 1 Start DATA CENTER 3. the docking station to the computer. 3 Connect the device to the docking station (see ‘Connecting a docking station’ on page 7).
SIGMA Data Center 3 4.2 Configuring the device settings with Data Center 3 If you use a docking station, you can conveniently change the device settings in DATA CENTER 3 and copy these to the device. You can also save the device settings and export them as a file. Example: You want to set a different language for your SIGMA device using DATA CENTER 3. Start DATA CENTER 3. Connect the docking station to the computer. 3 Connect your device to the docking station. 4 Click My Computers.
SIGMA Data Center 3 5 After training The docking station can be used to import the values from your SIGMA device into DATA CENTER 3. All the values recorded by your SIGMA device are displayed in the Training data area. You can enhance the training data in this area by adding notes and compare two training sessions. The export function enables data exchange. 5.
SIGMA Data Center 3 5.2 Transferring data without a docking station Even if you do not have a docking station, you can still use DATA CENTER 3 to evaluate your training sessions. To do this, manually create your training sessions and enter the data using your keyboard. If you purchase a docking station at a later date, you can still continue to use the manually entered training data. Tip: You can also manually enter training data if you have trained without using the device.
SIGMA Data Center 3 6 Organizing the data 6.1 Selecting a training session You can select memories and LOGs from various places: – Dashboard The dashboard always displays the last seven training sessions. Move the mouse over a training session to see which device was used to record the data. Click to open the training session. Right-click a bar in the week or month view to open a pop-up window with all the training sessions from this period.
SIGMA Data Center 3 6.3 Entering notes on training sessions In addition to the pure performance data for a training session, you can also enter information about the weather, the profile or the intensity. – Enter a description Enter text describing the training session or anything in particular that occurred. Example: You want to enter notes about your most recent training session. DATA CENTER 3 is active, you have imported the training data and the dashboard is open.
SIGMA Data Center 3 6.5 Memories 6.5.1 Comparing memories The memory comparison enables you to compare two memories. In doing so, it does not matter which SIGMA device was used to record the memories. This means that you can even import and compare memories from training partners, friends and acquaintances. 5 Select the appropriate SIGMA device from the drop-down menu. The memories for the relevant device are listed. 6 Double-click to select a memory.
SIGMA Data Center 3 6.5.3 Exporting memories You can export individual memories in various file formats for data exchange purposes. File format Exported Reason smf Data and notes – Import into DATA CENTER 3 e.g. for data exchange csv Data and notes – Import into table calculation – Import into other software Example: You have trained with a teammate. Your teammate wants to conduct a data comparison. You therefore export your training session as an smf file. Click My Computers.
SIGMA Data Center 3 6.6.2 LOGs (only for devices with a LOG function) Some SIGMA devices also record LOGs. LOGs enable you to view and analyze your performances in great detail. The graph and the option of showing and hiding individual parameters assist you with this. LOGs can be exported, compared and edited in other applications. Note: To use clear examples, the examples refer to devices in the ROX series or running watches. The values shown cannot be recorded by all devices. 6.6.
SIGMA Data Center 3 6.6.2 Creating a customized LOG view In the default view for LOGs, the chart appears in the top half of the window and the value table in the bottom half. These areas are known as drop zones. You can drag and drop the various drag elements into the drop zones to create your own LOG view. Use the drag and drop function to change the positions of the chart and the table or to display two charts or two tables. Drag and drop the drag element into the upper or lower drop zone.
SIGMA Data Center 3 6.6.4 Selecting the values for the chart You have selected a LOG and only want to display certain values as lines on the chart. In DATA CENTER 3, you can show or hide the values, rest periods and laps plus display average lines and heart rate zones. Note: The contents of the chart options adjust to the selected devices and only show information that the device actually provides. Example: You have completed a hill training session on your racing bike.
SIGMA Data Center 3 6.6.6 Editing a lap 1 2 3 4 Activate the Lapscheckbox in the chart options. Move the mouse over the lap indicator to view a small green information box. Click the Edit marker icon and enter the information. Click Save. Tip: All laps can also be viewed in the LOG view Values table. You can use this area to select and delete multiple laps. 6.6.7 Printing a LOG You can print complete LOGs or parts of LOGs or save these as a PDF.
SIGMA Data Center 3 6.6.8 Exporting a LOG You can export individual LOGs in various file formats for data exchange purposes. File format Exported Reason smf Data and notes – The LOG is exported as a memory slf Individual values, waypoints, breaks and notes – Import into DATA CENTER 3 e.g. for data exchange Individual values – Import into the table calculation – Import into other software csv Click My Computers. All SIGMA devices are displayed.
SIGMA Data Center 3 6.6.10 Comparing LOGs You can compare either two of your own LOGs or one of your own LOGs with an imported LOG from a teammate. Example: You have completed a hill training session with a teammate and have both recorded LOGs of the ascent. You now want to compare the heart rate values. You have already imported your LOG into DATA CENTER 3. You have received a LOG export from your teammate and imported it into DATA CENTER 3. 1 2 3 4 Open the LOG file for your ascent.
SIGMA Data Center 3 7 Statistics DATA CENTER 3 provides several different statistics. – Total values for the SIGMA device In addition to the training data, each device records the total values for the connected sensors in an extra memory. Whenever you use your device, it adds the new values to the total values, including for rides to the local bakery or calibration rides. Select the total values under My Computers > Device. Import the latest total values from your device.
SIGMA Data Center 3 7.2 Activating or deactivating memories or LOGs for the statistics You can activate and deactivate individual memories and LOGs for the statistics. My Computers > Device > Training data > Checkbox in the Statistics column NOTE: If a device has both memories and LOGs, only the memories are automatically activated for the statistics. Example: You only want to see your training sessions in the statistics and therefore deactivate all races. 1 Click My Computers.
SIGMA Data Center 3 8 Filtering data Over time, more and more memories and LOGs are collated in DATA CENTER 3. In the Statistics area and the training data list view, you can use filters to find certain data faster or only evaluate certain data. 8.1 Saving new filters You can create filters in the Statistics area and the Training data screen. If you create a filter without saving it, it is displayed as a new filter and you can use it until the program is closed.
SIGMA Data Center 3 8.3 Modifying filters You can modify existing filters in the Statistics area and the Training data screen. 4 5 6 Example: You have created a three-star rating filter and want to extend this to only include training sessions from the current year. 1 2 3 7 8 Activate the Date checkbox. Enter 01.01.2012 in the from field. Enter 31.12.2012 in the to field. Click Save. The new setting is saved. Click Close. The filter window closes and the filter is set.
SIGMA Data Center 3 9 Maintenance You should check the battery status of the individual components at regular intervals. If your device supports this function, you can conveniently do this in DATA CENTER 3 using the docking station. If you use a device with LOGs, you should regularly delete the LOG memory. 9.1 Checking the battery status Connect your device to the computer. You can see an overview of the current battery status in the dashboard.
SIGMA Data Center 3 9.3 Modifying device settings and copying them to the device You can modify the device settings either directly on the device or via DATA CENTER 3. Information on how to modify the settings directly on your SIGMA device can be found in its instruction manual. For how to modify the settings using DATA CENTER 3, please see the example below. Example: You want to set a different language for your device. DATA CENTER 3 has been started and the docking station is connected to the device.
SIGMA Data Center 3 9.6 Modifying the storage location for the database DATA CENTER 3 saves all the values in a database. You can specify where on your computer this database should be stored. Saving the database Go to Settings > Options and click Move to. Note: Opening a saved database Go to Settings > Options and click Open. You only need this function if you want to select a storage location other than the one preselected by DATA CENTER 3. 9.
SIGMA Data Center 3 10 FAQ – frequently asked questions I can’t connect my device to the computer (red LED illuminates on the docking station). – Check whether the SIGMA device is correctly connected to the docking station. I can’t connect my device to the computer (green LED illuminates on the docking station). – Check whether the mobile software Sony Ericsson PC Suite or Nokia PC Suite is installed on your computer. If so, end and deactivate the process PCSuite.exe or SEPCSuite.exe.
