Manual

55
USA/GB
ROX 9.1
n
n
n
n
5 DESCRIPTION OF FUNCTIONS
(functions shown during the ride)
The SIGMA ROX 9.1 is equipped with a light manager.
The light can be enabled or disabled (see following illustrations for this).
When the light is enabled, the light switches on with every press of a
button and stays on for 3 seconds - provided no other button is pressed
during these 3 seconds. The display does not change due to using the
light.
To activate a function with the light switched on, another button must
be pressed within 3 seconds until you reach the required function.
Note: When the SIGMA ROX 9.1 is in sleep mode, the light manager is
automatically disabled.
5.8 SPECIAL FUNCTIONS
5.8.1 LIGHT MANAGER
All time functions can be found under: “Time”.
The following functions belong to this submenu:
k Clock
k Date
k Stopwatch
k Countdown timer
k Alarm clock
The stopwatch is started and stopped with the top right-hand
button. You can use the left button to reset the stopwatch to zero.
The stopwatch runs independently from the ride time and must
therefore be manually started and stopped.
To pre-program the countdown, press on the top right-hand button.
Follow the instructions on the display to set the time. After setting
the time, start or stop the countdown by pressing the top right-hand
button. Reset the countdown to zero with the left-hand button.
5.7 TIME FUNCTIONS