Operating instructions
Press the arrow keys
[UP]
or
[DOWN]
.
ð
The flashing digit or number counts up or down.
Under "change individual digits": confirm each digit by pressing the
[P]
key.
ð
Upon confirming the last individual digit, the display simultane‐
ously changes to the next menu option or into a continuous dis‐
play.
Under "change a number": Press the
[P]
key 1x.
ð
The display simultaneously changes to the next menu option or
into a continuous display.
Press the
[i]
key 2x.
ð
You jump back to the first digit.
8.2 Checking adjustable values
Before you adjust the pump control, you can check the actual settings of
the adjustable values:
Press the
[i]
key ("i" for "Info"), if the LCD screen shows a contin‐
uous display (The display does not contain the
[P]
key symbol).
ð
Each press of the
[i]
key toggles the continuous display output
to the screen to another continuous display.
The number of continuous displays depends on the identity code, the
selected operating mode and the connected additional devices, see over‐
view "Continuous displays" in the appendix.
8.3 Changing to adjustment mode
1. In a continuous display press the
[P]
key for at least 2 seconds.
ð
The pump control changes to adjustment mode.
2. If
“CODE 1”
was set, then after pressing the
[P]
key, the code must
first be entered.
The following menus can initially be chosen in adjustment mode - see also
"Operating/setting overview" in the appendix:
n
“MODE”
menu
n
“CODE”
menu (option)
n
“SET”
menu
n
“CLEAR”
window
Changing adjustable values
Confirming adjustable values
Correcting incorrectly set digits
Adjustment
38