Operating instructions

Only use the original fuses from ProMinent! It is not sufficient

to use a fuse with the above fuse rating.

14.6 Diaphragm rupture sensor

Pin Allocation

1 (white 4.5 V ... 24 V, max. 10 mA

2 (brown) OUT, open collector, 24 V, 20 mA

3 (green) GND

Data Value Unit

Pulse width (low)* ≥4 ms

* depending on the gear and mains frequency

The polarity is unimportant.

5–25 V DC, in accordance with Namur or DIN 60947-5-6, potential-free

design.

Data Value Unit

Nominal voltage * 8 VDC

Power consumption - active surface

uncovered

> 3 mA

Power consumption - active surface cov‐

ered

< 1 mA

Rated switching distance 1.5 mm

* Ri ~ 1 kΩ

Cable colour Polarity

blue -

brown +

14.7 Relay

The technical data for the relay are contained in the chapter

"Installation, electrical".

b) Reed switch (identity code specification

"Stroke sensor": 2)

b) Namur sensor (identity code specifica‐

tion "Stroke sensor": 3)

Technical data