User manual

Table Of Contents
106
CAUTION!!
The flash exposure compensation can not be set if the flashgun is not
attached to the camera, or the flashgun is turned off.
The flash exposure compensation will not disable automatically. After
taking the picture, set the compensation value to ±0.0 by above
procedure.
The sd Quattro H is equipped with a Sync.Terminal ( P. 1 6-
),
which accepts a cable connection fro external/studio flash units.
CAUTION!!
S-TTL auto flash does not work, if Sync.Terminal is used.
Set the cameras exposure mode to M and set to flash synchronized
speed Sync (1/180) or a shutter speed of 1/160 or lower. See the
instruction manual of the particular flash used for additional information.
The sd Quattro Hs Sync.Terminal is compatible with plugs that have a
positive (+) polarity on the central pin and a negative (
-
) polarity on the
shield. If the plug has reverse polarity, use a commercially-available
polarity conversion cord.
WARNING!!
The Sync.Terminal cannot accept flashes that use a voltage of more
than 250V. Higher voltage will damage the camera. Please ask the
manufacturer of the flash about the voltage and compatibility with the
Sync.Terminal.