User manual

Table Of Contents
141
ADJUSTMENT OF ELECTRONIC LEVEL
Electronic level’s tilt can be adjusted.
1
Select from [ Camera Settings] (P. 3 1 ) [Adjust Electronic Level].
2
Place the camera on a horizontal surface, and press the button.
The new adjustment value is recorded.
To reset, press the button. A confirmation dialog will appear. Use the
buttons to select [Yes], and press the button to confirm. The
adjustment value returns to factory default.
CUSTOMIZING THE DIAL
The dial’s functions or operating directions to set exposure can be
customized.
SWITCH DIAL FUNCTIONS
The Front Dial and the Rear Dial are used for changing the aperture value,
shutter speed and exposure compensation. It is possible to change the
function of them for each Exposure Mode.
It is possible to set from [ Capture Settings
]
(P. 31)
[
Switch
Dial
Functions
]
.
Select the desired Exposure Mode by
pressing the button and change the
function by using the button. To apply
the setting, press the button.
To reset to the default setting, please press the button and then
press the button.