User manual

Table Of Contents
150
TRANSFERRING IMAGES TO A COMPUTER
It is possible to transfer the images recorded on the card in the camera to a
computer.
Using SIGMA Photo Pro you can transfer the images. Please refer to
the help in SIGMA Photo Pro for details of the transfer method.
The camera is recognized as a removal disc (device) by the computer.
Therefore, the images can be transferred in an accustomed way without
using SIGMA Photo Pro.
WARNING!!
Please ensure your computer is not in sleep mode whilst your camera
connects to the computer. It may cause the data to be lost or damaged.
Please use only the USB cable supplied with your camera.
The shutter button and color LCD monitor will be disabled while the
camera is connected to the computer via a USB cable.
The Auto Power Off function does not work while connecting the USB
cable.
TO OPERATE THE CAMERA IN YOUR COMPUTER
Using the camera control software SIGMA Capture Pro, you can remotely
operate the camera in the following ways.
It is possible to control cameras and take pictures from the computer.
It is possible for images to be immediately transferred to a computer after
shooting.
It is possible to change the camera settings for shooting from a computer.
For details and how to use SIGMA Capture Pro, please refer to the help
in SIGMA Capture Pro.
SIGMA Capture Pro can be downloaded free of charge from the
following website: http://www.sigma-global.com