User manual

Table Of Contents
26
MOUNTING AND REMOVING THE LENS
1
Turn the power switch to OFF.
2
Remove the camera body cap and the rear
cap of the lens.
3
Align the lens mount index on the camera
with the index on the lens. Insert the lens
into the mount of the camera and rotate
the lens clockwise until it clicks into the
locked position.
CAUTION !!
To ensure a proper connection, do not hold down the lens lock button
while mounting the lens.
The sd Quattro H contains a dust protector, located inside the lens
mount. The dust protector is a very delicate device. Take care not to
scratch its surface. Touching or pushing it with your fingers can easily
damage it. If there is dirt or dust on it, please refer to the Maintenance
section of this manual (P.156).