User manual

Table Of Contents
28
SETTING THE LANGUAGE
You should receive the sd Quattro H camera pre-set to English, however, if
necessary, you can change the camera language yourself.
For when the camera used for the first time
When the camera is switched on for the first time, select a language on the
display. Press
buttons and confirm the language by pressing the
button.
After selecting a
language, input the date and time on the display. For the
details of settings, refer to the instructions in “
SETTING THE TIME AND
DAT E” on the page 29 of the instruction manual, from the section number
5
onward.
1
Turn the camera on.
2
Press the button on the back of
the camera to display the Camera Set-up
Menu. (See P.3 1 )
3
Select [ Camera Settings (4)] by
rotating the Front Dial or the Rear Dial.
4
Use the buttons to select [Language/
言語].
5
Press the or button to open the
language set-up page.
6
Use the buttons to select the
desired language.
7
Press the button to apply the setting
or the
button to return to the
language set-up page without making
any changes.