User manual

Table Of Contents
9
WARNING
(
BATTERY CHARGER AND AC ADAPTER
)
The battery charger is for indoor use only. Do not store the charger in
humid or dusty locations.
Use it within the 0°C
- 40°C temperature range only.
The AC Adapter is designed for use with this product only. Do not use it
with any other appliance. Doing so may cause overheating, fire, electric
shock or injury.
If the adapter is emitting smoke, generating a strange odor or making an
abnormal noise, while in use, disconnect the power plug from the outlet
immediately. Otherwise, fire or electric shock may result.
If water or a foreign object gets into the adapter, unplug from the AC outlet
immediately. It could cause fire or electric shock.
Do not attempt to modify or disassemble this product. Doing so can cause
fire or electric shock.
Do not place any heavy objects on the power cord, or pull it, bend it unduly,
or heat it. It could damage the cord, and could cause fire or electric shock.
Do not use this product with AC voltage other than the specified power
supply voltage AC110V
-
240V (120V in U.S.A. and CANADA). Doing so
could cause fire or electric shock.
Use a safety approved AC power cord as is specifie
d by each country.
WARNING
(
CAMERA
)
Never use your camera in an environment where flammable or burnable,
gas, liquids or chemicals, such as Propane, Gasoline, etc., are present.
Keep the camera in a safe place that children cannot reach. Playing with
the camera strap around one’s neck can cause strangulation.
Do not disassemble the camera; Doing so can cause electric shocks and
burns.
Do not touch internal parts of the camera that become exposed as a result
of damage, it could cause fire or
electric shock. Remove the batteries and
contact an authorized Sigma service station.
Do not look at the sun with the lens of your camera; otherwise you could
lose your eyesight.
Keep the camera away from moisture or water. If you drop your
camera/lens in water, please contact the retailer where you purchased the
camera, or a service station immediately. If you use the camera with this
condition it can cause electric shock or fire.
Prevent water, or metallic and other conductive objects from coming into
contact with the terminals of the camera body. This can result in electric
shock, overheating and fire.