User manual

Table Of Contents
90
3
Select a desired value with the button. Finalize by using the
button or the button.
4
Press the shutter button ‘‘half-way’ to return to the
shooting mode. (The Auto Bracketing icon will be
displayed on the color LCD monitor.)
The operations in each Drive Mode are shown below.
Single Capture
Each time the shutter button is pressed, an image will
be taken one frame at a time.
Continuous
The set number of frames will be taken continuously
by pressing and holding the shutter button.
Self Timer
2 sec.
Two seconds after pressing the shutter button, the set
number of frames will be taken continuously.
Self Timer
10 sec.
Te n seconds after pressing the shutter button, the set
number of frames will be taken continuously.
CAUTION !!
This function cannot be used with the interval timer shooting.
The exposure bracketing can be used with 4 different modes.
P Mode
Both shutter speed and aperture value will be changed.
A Mode
Only shutter speed will be changed.
S Mode
Only aperture value will be changed.
M Mode
Only shutter speed will be changed.
WARNING !!
Once you set the auto bracketing mode, the camera will continuously
hold that auto bracketing mode until you set the bracketing amount to
±0.0”.
Auto Bracketing cannot be used with a flashgun.
Auto Bracketing cannot be used with Bulb shooting.