User's Manual

Tele Eye
RX
User
Guide Page 120
Event Handling
IV. Motion
Motion
Motion detection can be triggered when motion occurs on the camera. Motion detection has
different sensitivity levels. For motion event on each video input channel, it depends on the
motion of selected area. User should setup the select motion areas and sensitivity. Motion
detection has generally 4 options : high, middle, low and custom. Custom option allows user to
select the sensitivity level and area by themselves.
Motion Detection Example
If motion detection is enabled, object movement is captured by the camera as shown below.
The figure on the left shows motion detection.
The normal display area is the selected motion
detection area. The blue area cannot detect any
motion. Motion block is activated when there
is any movement on the camera.
Sensitivity
 Level
The level definition of motion detection is due to the luminance level difference between
current and reference field. The level range is 1 to 10, 1 is the most sensitive and 10 is the
least sensitive

Area
In motion detection, one selected motion block is divided into
four sub-blocks. The definition of area is how many sub-
blocks have detected motion in order to trigger a motion event.
The range of area option is 1 to 4. More blocks are selected,
the motion trigger sensitivity decrease.