User's Manual

Tele Eye
RX
User
Guide Page 125
Event Handling
VI. System Tamper
System Tamper Input
It is an input to the transmitter for wiring a tamper switch of the external cabinet outside the
transmitter and its accessories. The purpose of system tamper event is to prevent someone to
break into the cabinet and destroy the transmitter.
Sensor Type
The system tamper input circuit type is normal close (NC). The state of the circuit is close, it
indicates normal of
Tele
Eye RX. Otherwise, the state of the circuit is open, it indicates
system tamper of
Tele
Eye RX. The system tamper input circuit type is normal open (NO).
The state of the circuit is open, it indicates normal of
Tele
Eye RX. Otherwise, the state of the
circuit is close, it indicates system tamper of
Tele
Eye RX.
Physical Configuration for System Tamper
The system tamper input and ground of
Tele
Eye RX transmitter need to connect to an
external cabinet which is used for protecting the transmitter and its accessories
System Tamper Input
External cabinet
Ground
System Tamper Setup Procedure
Step 1: Press “
Menu
” button, select
[SETUP]
option and press “Enter”
button to
enter [SETUP] sub menu. Select
[EVENT HANDLER] option and press
“Enter”
button.
SETUP MENU
VIDEO . . .
RECORDING . . .
SWITCHES . . .
DATE / TIME . . .
CONNECTION . . .
EVENT HANDLER . . .
TRANSMITTER . . .
RESTORE FACTORY SETTING ENTER