User's Manual

Tele Eye
RX
User
Guide Page 126
Event Handling
Step 2: Select [SYSTEM TAMPER] option and
press “Enter”
button to show the
system tamper menu and press “Enter”
button to enter the System Tamper
setting menu.
Step 3: Select [ENABLED] option and use
“Left”
or “Right” button to
enable (i.e. set the value to
[YES]
)
System Tamper event handler.
Step 4: Select
[SENSOR TYPE]
option and use
“Left”
or “Right” button to
choose sensor type according to the
configuration of
Tele
Eye RX system
tamper control circuit type
Step 5: Select [ACTION] option and press
“Enter”
button to select system
tamper action. (For action, please refers
to Event Action Part in Advance
Operation Section of User Guide)
EVENT HANDLER
ARM / DISARM . . .
SECURITY SWITCH . . .
ALARM . . ..
MOTION . . .
VIDEO LOSS . . .
SYSTEM TAMPER . . .
POWER FAILURE . . .
SYSTEM TAMPER
ENABLED YES
SENSOR TYPE NO
ACTION …
SYSTEM TAMPER
ENABLED YES
SENSOR TYPE NC
ACTION …
SYSTEM TAMPER
ENABLED YES
SENSOR TYPE NC
ACTION …