User's Manual

Tele Eye
RX
User
Guide Page 128
Event Handling
Step 2: Select [POWER FAILURE] option and
press “Enter”
button to enter the
power failure setting menu.
Step 3: Select
[ENABLED]
option and use “
Left
”
or “Right” button to enable
(i.e. set the value to [YES]) power failure
event handler.
Step 4: Select [SENSOR TYPE] option and use
“Left”
or “Right” button to
choose sensor type according to the
configuration of
Tele
Eye RX power
failure control circuit type
Step 5: Select [ACTION] option and press
“Enter”
button to select power failure
action. (For action, please refers to Event
Action Part in Advance Operation Section
of User Guide)
EVENT HANDLER
ARM / DISARM . . .
SECURITY SWITCH . . .
ALARM . . ..
MOTION . . .
VIDEO LOSS . . .
SYSTEM TAMPER . . .
POWER FAILURE . . .
POWER FAILURE
ENABLED YES
SENSOR TYPE NO
ACTION …
POWER FAILURE
ENABLED YES
SENSOR TYPE NC
ACTION …
POWER FAILURE
ENABLED YES
SENSOR TYPE NC
ACTION …