User's Manual
Tele
Eye
RX
User
Guide Page 133
Event Action
Step 2: Select [ENABLED] option and use “Left”
or “Right” button to enable
(i.e. set the value to [YES]) switch action.
Step 3: Select [SWITCHES ENABLED] option
and press “Enter”
button to enable or
disable the switches.
Step 4: Use the “Left” or “Right”
button to select switch and press the “Up”
or “Down” button to enable or
disable switch.
Step 5: Press “Enter”
button to save the
selection setting and go back to switch
action menu.
Step 6: Select [GENERAL SWITCH SETTING]
option and press “Enter”
button to
enter the switch setting menu.
Step 7: Select [SWITCH (No.)] option and press
“Enter”
button to enter the switch
(No.) setting menu.
XXXXXXX SWITCH
ENABLED YES
SWITCHES ENABLED - - - -
GENERAL SWITCH SETTING . . .
ASSOCIATE SWITCH
1 - 3 -
GENERAL SWITCH SETTING
SWITCH 1 . . .
SWITCH 2 . . .
SWITCH 3 . . .
SWITCH 4 . . .
LATCH DURATION 10 SEC
ACTION DELAY 10 SEC