User's Manual

Tele Eye
RX
User
Guide Page 12
Hard Disk Installation
Installation Procedure
Turn OFF transmitter
Step 1: Press “
Menu
” button, select
[SHUT DOWN]
option and press “
Enter
” button.
Step 2:
[SHUT DOWN]
menu will pop up and select
[SHUT DOWN]
option and press “
Enter
”
button.
Step 3: Select
[YES]
option and press “
Enter
”
button to turn off the transmitter.
Switch OFF
the
transmitter when the [IT IS NOW SAFE TO TURN OFF RX] message pop up.
Note that you MUST turn OFF the transmitter when install or remove Hard disk.
Step 4: Pull the active-handle outwards, then use the
bundled key provided and insert into the
keyhole, turning the key anti-clockwise
(position C), then you can pull out the handle.
Step 5: Pull the handle outwards to remove the carrier
body away from the cartridge frame.
Step 6: Push the release latch to slide the top cover
backwards and remove.