User's Manual

Tele

Eye

User

Guide Page 13

Hard Disk Installation

Step 7: Insert the DC power cable and IDE cable on

the HDD

Step 8: Position the HDD into carrier body and secure

the HDD using the four screws provided.

Step 9: Slide the top cover back to the carrier body by

sliding forward to secure.

Step 10: Slide the carrier body back into the cartridge

frame and push carrier body further into

cartridge frame until fully inserted.

Step 11: Pull the active-handle outwards, then use the

bundled key and insert into the keyhole,

turning the key clockwise (position A) to

secure the handle.