User's Manual

Tele

Eye

User

Guide Page 42

Setup

Tele

Eye RX for Broadband or Narrowband

Internet Connection with Static IP

10/100 BASE-T

LINK COL



In Windows 2000/XP desktop, select Start

> Control Panel

 Double click Network and Dial-up

Connections > right click Local Area

Connections and choose Properties.



Choose Internet Protocol (TCP/IP) and

click Properties

 Enter the IP address, subnet mask and

Default gateway for the PC to restore to

its original network configuration.

 Click OK to apply the setting

Step 12: Disconnect the transmitter and current PC. Reconnect the transmitter and current PC

to the Internet network through straight-through Ethernet cable.

Step 13: Check Ethernet socket of both the transmitter and PC to ensure that the {GREEN

LINK LED} turns ON. Then connection diagram is shown as follows:

RG59 cable

Power Adapter

Ethernet

Socket

CCTV

Monitor

Tele

Eye RX

Cameras

210.17.139.145

211.134.139.7

211.134.139.9

Internet

210.17.139.1

Router/Gateway

211.134.139.1

Router/Gateway

Straight-through Ethernet cable