Installation Manual

ValveWatch II Hardware Installation and Setup Manual
Page 33 of 34
CRANE
Nuclear
11.4 Strain Sensor Cleaning Instructions
The strain sensor is an encapsulated module permanently attached to the valve assembly. Cleaning
may be required for purposes of component identification or part of a routine plant cleaning
process. Do not use high pressure or high temperature liquids as part of the cleaning process. Such
use could inadvertently damage the wire connecting the sensor to the LDAU. Use of water soluble
detergents should be used with a cloth or sponge and rubbing effort.
11.5 Static Pressure Sensor Cleaning Instructions
The static pressure sensor is an encapsulated sensor attached to the pressure tap. Cleaning may be
required for purposes of component identification or part of a standard plant cleaning process. Do
not use high pressure or high temperature liquids as part of the cleaning process. Such use could
inadvertently damage the wires connecting the sensor to the LDAU. Use of water soluble
detergents should be used with a cloth or sponge and rubbing effort.