Specifications

OPERATING INSTRUCTIONS
The SS2000SM control head is designed to assist
the operator’s selection of functions. Each control
head switch is recessed and aids guiding the
operator’s finger to the switch’s center for activation.
When a switch is pressed, “tactile feedback” provides
SECTION V
CONFIGURATION
WARNING
Property damage, serious injury, or
death to you or others may result if the
SmartSiren is improperly programmed.
Programming, if required, is to be per-
formed at the time of installation. It is
NOT intended for operators to “custom-
ize” the unit’s operation for their indi-
vidual preferences. It is the USER’s
responsibility to determine compatibil-
ity, suitability, and ensure proper pro-
gramming of the SmartSiren.
The person responsible for programming
MUST be familiar with local codes and
procedures for safe emergency vehicle
siren and light operation.
CONFIGURATION INSTRUCTIONS
The SmartSirenSM is an extremely versatile
and configurable electronic siren and light control
system. Available siren tones are: wail, yelp, priority,
hi-lo, and an air horn sound. Horn ring control of
siren tones is provided. Public address and radio
rebroadcast are available. Eight relay outputs are
available for controlling light bars, other auxiliary
lights, and accessories. An integrated SignalMaster
controller is available for controlling directional
lights.
For configuration instructions, refer to the
supplied Operation and Configuration Instructions.
-15-
function selection indication as follows: a click is felt,
a beep is heard, and the selected function’s key
illuminates brightly.
Specific operating instructions are provided in
the supplied Operation and Configuration Instruc-
tions.