USER MANUAL NVR 2708 NVR2716 -1-
Thank you for purchase our product. Please read this user manual carefully to ensure that you can use the device correctly and safely Important Safeguards and Warding: ◆ Do not place heavy objects on the NVR. ◆ Do not let any solid or liquid fall into or infiltrate the NVR. ◆ Please brush printed circuit boards,connectors,fans,machine box and so on regularly.Before the dust cleaning please switch off the power and unplug it. ◆ Do not disassemble or repair the NVR by yourself.
CONTENT CONTENT .................................................................................................................................................................. 3 1 Open-package check and cable connections ................................................................................................... 4 1.1 Open-package check ..................................................................................................................................... 4 1.2 Front panel ...........
1 Open-package check and cable connections 1.1 Open-package check When you receive the NVR, please check first. First, please check whether there is any visible damage to the package appearance. The protective materials used for the package of the NVR can protect most accidental clashes during transportation. Then, please open the box and get rid off the plastic protective materials. Check whether there is any visible damage to the NVR appearance.
press buttons 0~9 to input passwords and user IDs; during playback, press the following: 5) : Increase reverse playback speed 1X, 2X, 4X 6) : Press to freeze playback to one frame, then press again to advance frame-by-frame 7) : Press to start playback 8) : Press to slow playback speed by 1/2, 1/4, 1/8 9) : Press to increase forward playback speed 1X, 2X, 4X 10)MENU/ OK: Press to open/close the main menu.or confirm.
2.1 Turn on Plug the power supply and turn on the power supply switch. Power supply indicator light shining indicates turning on the video recorder. After the startup you will hear a beep. The default setting of video output is multiple-window output mode. If the startup time is within the video setting time, the timing video recording function will start up automatically. Then the video indicator light of corresponding channel is shining and the NVR is working normally. Note:1.
Picture 2.3 System Login Password protection: If the password is continuous wrong three times, the alarm will start. If the password is continuous wrong five times, the account will be locked. (Through reboot or after half an hour, the account will be unlocked automatically). For your system security, please modify your password after first login. 2.4 Preview You can right click mouse to choose the switch between the windows. The system date, time and channel name are shown in each viewing window.
1 2 3 4 Pic 2.4.1 Preview interface (1) (3) Channel name and status display,click “channel” can pack up Full screen display (2) Screen switch (4) on the next page turning,when choosing a non maximum number of channels,the operation can be carried out Note:It’s main stream’s resolution under single window,and it’s extra stream’s resolution under multi-screen. 2.5 Desktop shortcut menu In preview mode you can right click mouse to get a desktop shortcut menu,as the picture 2.2 shows.
2.5.1 Main menu When you login, the system main menu is shown as below. Pic 2.5.1 Main menu 2.5.2 Playback There are two methods for you to play the video files in the hard disk 1.In the desktop shortcut menu 2.Main Menu>Record>playback Note: The hard disk which saves the video files must be set as read-write or read-only state.
11 2 10 Pic 2.5.2.0 Video playback 1 Playback control 2 Operation hint 3 Record mode 4 5 Switch by time,file mode 6 File searching 7 Channel choosing 8 9 Storage device choosing 10 File information 11 Listed files 12 Time interval choosing Date choosing Time searching 【Listed files】Look up the listed files that accord with the searching criteria. 【File information】Look up the found file information.
Special functions： ： Local zoom:When the system is in single-window full-screen playback mode, you can drag your mouse in the screen to select a section and then left click mouse to realize local zoom. You can right click mouse to exit. Note: When current resolution of the channel is over Max resolution, to playback this channel, will show a Red “X”. 2.5.3 Record Control Please check current channel status: “○” means it is not in recording status, “●” means it is in recording status.
Pic 2.5.4 Alarm output 【Configuration】Alarm is on according to the configuration. 【Manual】Click the all button and the according channel is alarming no matter the channel in any state. 【Stop】Click the stop button and the according channel stops alarming no matter the channel in any state. 2.5.5 PTZ control PTZ control,the digital channel need link PTZ, the remote device should connect with PTZ and with protocol correctly set also. Operation interface is as followed.
【Iris】Click / button to adjust the iris of the camera. 【Hide】Current interface will be temporarily hidden after click it. 【Direction control】Control the PTZ rotation. 8 directions control is supportive.(4 directions in Front panel is supportive ) 【High speed PTZ】Full-screen show channel image. Left press mouse and control PTZ to rotate orientation. Left press mouse and then rotate the mouse to adjust the zoom multiple of the camera 【Set】Enter the function operation menu.
Value input blank Pic 2.5.5.2 PTZ control 2、 、Tour Multiple preset points connected tour ,the PTZ run around on the line 1）Tour Settings Tour is connected by multiple preset points, setting procedure is as follows: Step1: In Picture 2.5.5.0, the Direction key will turn PTZ to designated location ,click Settings button to enter Picture 2.5.5.3.
3、 、Scan PTZ also can work on the preset scan line repeatedly. 。 1）Scan setup Setting steps: Step1: In Picture 2.5.5.0, click Setup button ，enter Picture 2.5.5.4； Step2: Click Scan button，the input proper value in the scan value blank; Step3:Click Start button, enter Picture2.5.5.0,here you can set the following items: Zoom,Focus,Aperture,Direction and so on. Click Setup button to go back Picture 2.5.5.4 Step4: Click End button to complete setup.Click the right button of the mouse to exit.
reverse direction to the right scan. When the left and right scan not in the same horizontal ,the PTZ will regard the end of horizontal line which connect to left scan as right scan,cycle rotate from left scan along the reverse direction to the right scan. Left/Right scan setting button Line scan button border Pic 2.5.5.5 Boundary Scan Setup 2）Boundary Scan Calls In Picture2.5.5.0, click Page Switch button, then enter PTZ control menu as shown in Picture 2.5.5.2.
【Direct Aux open】 choose auxiliary equipment, select Open or Close button, switch control； 【 Aux Num open 】 The operation of corresponding auxiliary switch according to PTZ agreement； 【Page Switch】In Picture 2.5.5.6，click Page Shift button enter the Picture 2.5.5.5 PTZ Main Menu , the menu itself can be control by the menu control buttons 2.5.6 Output Adjust Adjust TV output area parameters. You can use the desktop shortcut menu or enter [Main menu]> [Advanced]> [Output Adjust]. Pic 2.5.6 Output Adjust 2.
【logout】Quit the menu. Offer password next entrance. 【shut down】Quit the system. Turn off the power supply. When press the shut down button, there is schedule hint. After three seconds, the system is shut down. Cancel midway is of no effect. 【reboot】Quit the system. Reboot up the system. 2.5.8 Full screen（ （leave full screen） ） According demand to choose full screen or non full screen. 3 Main menu 3.1 Record Operations related to record, including: Record, Playback, Backup 3.1.
make sure that there are two hard disks installed. One is read-write disk and the other is redundant disk. (refer to 3.5.1) 【Length】Set the time length of each video file. 60minutes is default value. 【Pre-Record】Record 1-30 seconds before the action. (time length is decided by the code stream) 【Record mode】Set video state: schedule, manual or stop. Schedule: Record according to the set video type (common, detection and alarm)and time section.
Picture 3.1.3 detect storage device 【Detect】Detect the storage connected with the NVR such as hard disk or universal disk. 【Backup】Click backup button and the dialog box is popped up. You can choose the backup file according to the type, channel and time. Picture 3.1.3.1 Backup Remove： ：Clear the file information. Add： ：Show the file information satisfying the set file attributes.
Note：During backup you can exit the page layout to carry out other functions. 【Burning】the file will be burned synchronously after click it. 【Erase】Choose the file to delete and click erasure to delete the file. 【Stop】Stop the backup. 3.2 Alarm Function Alarm functions include: motion detect,video blind, video loss, alarm input and alarm output, abnormality. 3.2.
Pic 3.2.1.1 set the time section 【Interval】Only one alarm signal is turned on even there are several motion detect signals in the set interval. 【Alarm output】Start the external equipment of corresponding linkage alarm when the motion detect alarm is turned on. 【Delay】Delay a few moments and stop when the alarm state is turned off. The range is 10~300 seconds. 【Record channel】Choose the recording channel (multiple option supportive). Trigger the video signal when the alarm is turned on.
Pic 3.2.1.2 PTZ linkage 【Delay】When alarm is over,recording will last some seconds(10~300sec),then stop. 【Show message】Pop the alarm information dialog box in the local host computer screen. 【Send EMAIL】■ means sending an email to user when the alarm is turned on. Note:Set in the [NetService] and send email. 【FTP upload】to tick it, the video & picture of related record channel & snapshot channel will be uploaded to assigned position.
Pic 3.2.3 Video loss Set method: refer to chapter 3.3.1. Motion detect 3.2.4 Alarm input When the equipment obtains the external alarm signal, the alarm function is turned on. Note: "Advanced" button is the same as right click. Pic 3.2.4 Alarm input Set method: refer to chapter 3.3.1. Motion detect 3.2.5 Alarm output Refer to chapter 2.5.4. 3.2.
Pic 3.2.6 Abnormal handing 【Event Type】 【Enable】 【Show message】 【Buzzer】 selecting abnormity you want to inspect Select it to make sure abnormal function workable Automatically alarm cue dialog box come out of the main screen Device will have one long nosie “di” while alarm is happening 3.3 System setup Set the system parameters such as:General,Network, Net service,GUI display,PTZ configuration/RS485 ,RS232,Tour and digital。 3.3.1 General Pic 3.3.1.
【Date Separator】Choose list separator of the data format. 【Time Format】Choose time format: 24-hour or 12-hour. 【Language】Support 29 language at present:S- Chinese,T-Chinese,English,Farsi,Finnish,French, Greek,Hungarian, Italian, Japanese, German, polish, Portuguese, Russian, Spanish, Thai, Turkish, Vietnamese, Romania, Brazil,Indonesia, Swedish, Arabic, Bulgarian, Czech, Hebrew, etc. 【HDD full】Choose stop record: Stop recording when the hard disk is full.
3.3.2 Network setup Pic 3.3.2 Network setup 【Net Card】You can choose cable network card or wireless network card. 【DHCP Enable】Obtain IP address automatically(not suggested) Note： ：DHCP server is pre-installed. 【IP address】Set the IP address. Default: 192.168.1.10. 【Subnet mask】Set the subnet mask code. Default: 255.255.255.0. 【Gateway】Set the default gateway. Default: 192.168.1.1. 【DNS setup】Domain Name Server. It translates the domain name into IP address. The IP address is offered by network provider.
Pic 3.3.3.0 Netservice 【PPPoE setup】 Pic 3.3.3.1 PPPOE Enable：Reverse■ means choose,setting can become effective. Input the user name and password that ISP（Internet service provider）provides. After saving it reboot up your system. Then the NVR will build a network connection based on PPPoE. The IP address will change into dynamic IP address after above operation is well done. Operation：After PPPoE dialing successfully look up the IP address in the [IP address] and obtain the current IP address.
Enable：Reverse■mean choose，setting can become effective. Host computer IP:Input the IP address installed NTP server. Port:Default: 123. You can set the port according to NTP server.
Pic 3.3.3.4 IP filter setup 【DDNS】 Pic 3.3.3.5 DDNS setup It is the abbreviation of dynamic domain name server. Local domain name：Provide the domain name registered by DDNS. User name： ：Provide the account registered by DDNS. Password： ：Provide the password registered by DDNS. When the DDNS is successfully configured and start, you can connect the domain name in the IE address column to visit. Note： ：The DNS setup must be configured correctly in the network setup.
Pic 3.3.3.6 FTP setup 【Enable】Click Enable,then all settings will be available 【Server IP】IP address for FTP server 【Port】Domain Port of FTP,default 21 【User Name】User name of FTP 【Password】Password of user 【Anonymous】：enable anonymous,no need setting user name and password 【Max File Length】Max length for upload files at every packed,default 128M 【Dir Name】 ：The directory of upload file. Note: The user should be with authority to upload files.
【Enable】■ means it is chosen 【Sever IP】IP address of DDNS server 【Port】: Port No. of device, related DDNS server listen port 【User name】the user name that device can log in DDNS server 【Password】the password related to the user name. 【Refresh cycle】Time interval between device and DDNS when chynchronously. Note: Please set up server before using DDNS. 【Alarm center】 When alarm occurring, report alarm information to alarm server. Pic 3.3.3.
Pic 3.3.3.9 Wireless setup 【Enable】Choose Enable to make all settings available 【Type】Dial type,default AUTO 【Wireless AP】3G access point 【Dial Number】3G Dial Number 【User Name】User name of 3G 【Password】Password of dial user 【IP Address】IP address,got from dial 【Mobile Monitor Setup】 To visit the device by mobile,please make a router mapping of this port and use mobile software to monitor and operate it by protocol. Pic 3.3.3.
Pic 3.3.3.11 UPNP setup 【Enable】Choose Enable to make sure all UPNP settings available 【HTTP】Route will automatically distribute HTTP port for the device,when IE viewing,it need this port 【TCP】Router will automatically distribute TCP port for the device,when monitoring via CMS,it need this port. 【Mobile Port】Router will automatically distribute Mobile Port for the device,when mobile monitor,it need this port.
【Password】：wireless network password of router； 【IP address】: to set the IP address of device, default is 192.168.1.12 【subnet mask】:set subnet mask of device, default is 255.255.255.0 【gateway】：set gateway of device, default is 192.168.1.1 【RTSP】 To do surveillance via cross-browser (Safari, Firefox, Google chrome ) and VLC software. This function only for monitor but can not control the device. Pic3.3.3.13 RTSP setup 【Enable】 ：■ means enable, tick it firstly before setting.
Pic 3.3.4 GUI display 【Time Display】Display the system data and time in the surveillance window. 【Channel title】Display the system channel number in the surveillance window. 【Record Status】Don’t support. 【Alarm Status】Display the system alarm status in the surveillance window. 【Transparency】Choose the background image transparency. The range is 128~255. 【Resolution】set display resolution. 3.3.5 RS485 Pic 3.3.
【Data bits】including 5-8 options，default is 8； 【Stop bits】including 2 options, default is 1； 【Parity】Include odd check, even check, sign check, blank check. Default: void. 3.3.6 RS232 Pic 3.3.6 RS232 setup 【Serial Port Function】Common serial port is used to debug and update program or set up specific serial port. 【Baud rate】Choose the corresponding baud rate length. 【Data bits】Include 5-8 options. 【Stop bits】Include 2 options. 【Parity】Include odd, even, mark, space, default is none. 3.3.
Pic 3.3.7 tour setup 【Interval】Set the tour switch interval time. The range is 5-120 seconds. 【Alarm tour】set the interval time to shift alarm tour, range is 5-120 seconds, choose return when alarm ends, when alarm link to tour, system will auto shift to six-view after alarm finished. Note：at preview mode, click upper right icon / can turn on / off tour（ mean turn off）. 3.3.8 Channel manage Digital manage including digital channel, channel status, and channel mode Pic 3.3.8.
Pic 3.3.8.1 Single link page of digital channel Multi-linkage page of Digital channel Pic 3.3.8.2 digital channel interface 【Channel】select channel number. 【Enable】Open digital channel, tick enable, then can do related settings 【Time Synchronization】Tick it means the time of this channel and device is the same.
Pic 3.3.8.3 remote channel configure page 【Configure Name】device is with default configure name, user can revise it if necessary； 【Device Type】3 types: IPC、DVR、HVR，user can choose as what you like, default is IPC； 【Protocol】Default is NETIP,can choose ONVIF. 【Remote channel】User can input remote channel title from the device that you want to connect remotely 【Stream】Default is main stream, do not support extra-stream at present； 【Device address】IP address of device.
Pic 3.3.8.4 the device list searched under remote channel setting Channel Status: Channel status is to show the status of all the digital channel When there is what existing, status Including Max Resolution, this Resolution, Connection Status. See as follow pictture: Pic 3.3.8.
Pic 3.3.8.6 Note: when under multi-screen,display extra stream’s resolution,when under single screen,display main stream’s resolution. when the current resolution is over the max resolution that the channel supported, then a red “X” will be shown on the preview image, for example: Under full digital channel mode, Max resolution of channel 3 is D1, if it was connected to a device with resolution over D1 ( such as 960H), you will see below pic: Pic 3.3.8.7 Channel mode: Pic 3.3.8.
3.4 Advanced Manage tools menu including: HDD Manage,Account,Online User, Output Adjust, Auto Maintain, Restore,Upgrade,Device Info,Import/Export. 3.4.1 HDD Manage Configure and manage the hard disk. The menu displays current hard disk information: hard disk number, input port, type, status and overall capability. The operation include: setup the write-read disk,snapshot,read-only disk, redundant disk,format disk,recover disk,partition.Choose the hard disk and click the right function button to execute.
Pic 3.4.2.0 Account 【Modify User】Modify the existed user attribute. 【Modify Group】Modify the existed team attribute. 【Modify Password】Modify the user password. You can set 1-6 bit password. The blank ahead or behind the char string is invalid. The middle blank in the char string is valid. Note： ：The user who possess the user control purview can modify his/her own or other users password Pic 3.4.2.1 modify password 【Add user】Add a user in the group and set the user purview.
Pic 3.4.2.2 add user 【Add Group】Add a user group and set the purview. There are 33 different purviews: shut down the equipment, real time surveillance, playback, record setting, video backup and so on. Pic 3.4.2.3 add group 【Delete User】Delete the current user. Choose the user and click delete user button. 【Delete Group】Delete the current group. Choose the group and click delete group button. Pic 3.4.2.
3.4.3 Online user To check the information of network user that connected with local device, also can tick the selected user to break up connection,（make √ at the box），then the user will be frozen after connection stopped, and will not log in until device reboot. Pic 3.4.3 online user 3.4.4 Output adjust Refer to chapter 2.5.7 . 3.4.5 Auto Maintain The user can set the time to auto reboot and auto delete file. Pic 3.4.5 auto maintain 3.4.6 Restore The system restore to the default .
Pic 3.4.6 restore 3.4.7 Upgrade Pic 3.4.7 upgrade 【Upgrade】 】choose USB interface. 【Upgrade file】 】choose the upgrade file. 3.4.8 Device Info Provide device interface info like audio in,alarm in/out to be conveniently used for user. Pic 3.4.8 device info 3.4.
import related configure file from flash stick to settings, which greatly bring convenience to the customers. Pic 3.4.9 import/export interface 3.5 Info Display the hard disk information, including HDD info, BPS, log,version info. 3.5.1 HDD info Display the hard disk state: hard disk type, overall capability, residual capability, the recording time and so on. Pic 3.5.1 HDD Info Tips：○ means that the hard disk is normal. X means that the hard disk is broken-down.- means that there is no hard disk.
3.5.2 BPS Display the code stream（Kb/S）and hard disk capability （MB/H）in real time. It displays as the wave sketch map. Pic 3.5.2 BPS 3.5.3 Log To search log information base on the set search mode. Log information include: system operation, configuration operation, data management, alarm affair, recording operation, account management, file management and so on. Set the time section to look up and click the look up button. The log information will display as a list.
Pic 3.5.4 version info Appendix 1.Remote controller operation The remote control is the secondary input device For navigating the system’s interface. To use the remote control: 1.STANDBY:Press to turn standby mode ON/OFF. 2. LOGIN/LOCK: If "Security" has been enabled in the Setup menu, press to open the user password login screen. 3. Number/Channel buttons: While in menus, press buttons 0~9 to enter values; during live viewing, press to view channels in full-screen. 4.
10. MENU: Opens the main menu. 11. EXIT: Close menu windows 12. EXTRA: For the future use. 13.
