4G wireless router User Manual
Introduction: Appearance --Above pictures are for reference purposes only.
Features This device supports FDD-LTE/WCDMA frequencies, it provides high speed 4G & 3G network sharing service for clients such as Smart phones,PCs etc. Indicators Description After the device is connected fully, the computer will install the driver automatically, then users can use wifi hotspot normally. Signal Indicators – (Red) ⚫ Red light ON means haven’t insert any SIM card or no signal. ⚫ Red light flashing means signal unstable, signal strength lower than 40%.
PC Connect Internet By 3G/4G If the computer does not equipped with any wireless card, the user should install driver according to the tips in USB connection. Remark: 1) If the system does not support CD ROM automatic installation after the device is connected to the computer, please run the CD ROM driver in My Computer and start manually software installation.
Connect Internet Via Wi-Fi When the users connect the device for the first time, it will required to enter an SSID and password, You can get the information through the following method. Check default Wi-Fi Key through the device label Check the key from the device label Tips: For your Wi-Fi safety, please log in the Web UI page to set a high safety Wi-Fi password.
Managing the Web UI Page Account management Please login the management page according to the below method: 1. Start the browser, enter http://192.168.0.1 into the webpage in address bar. If the IP address has conflict with the other IP address, the device will auto update new IP address. 2. Enter password and login the management page, the default password is admin. 3. After entering the management page, you can use SMS, Phonebook, SD card, Advance setting, Quick Setting functions.
Wi-Fi Connection Enter into Network setting and click on Wi-Fi settings, then you can get the Wi-Fi password. Main SSID and guest SSID can support 10 Wi-Fi users online simultaneously.
Data Management Click on Data Management and enter into, then you can set the daily, monthly statistic plan. As shown, you can create a flow plan and apply. Data Management Flow management interface shows current internet upload, download speed, current time usage statistic and connection time, current month total statistic usage and connection time.
Connection Settings Use the “Automatic” network configuration will pop-up a network selection list, it contains all searching network, user can select the available one, and the device will register to the selected network. APN Settings In Automatic mode, the relevant information on the APN will be automatically adapted according to the inserted SIM card.
Precautions: -Please use accessories only from the original factory or approved factories. Using any unauthorized accessories will affect the performance of this device, and will be against product warranty terms and related national regulations about communication terminal products. -Avoid use this device near metal structure or devices that emit electromagnetic waves, otherwise it will affect signal acceptance. - this device is not water proof. please keep it dry and store it in dry and cool environment.
Installation method Installation of the Micro-SIM card As shown in the below picture, please insert the SIM card and SD card accordingly When install the SIM and SD card, please open the back of the device and remove it, insert the Micro-SIM card and SD card into the slot according to the direction of the arrow. After installation successfully, put the cover back on the device and close it.
In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this 4G Wireless Router complies with the FCC guidelines and these international standards.
Hold the 4G Wireless Router as you would any other 4G Wireless Router with the antenna pointed up and over your shoulder. RF Exposure Information: This product is compliance to FCC RF Exposure https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm requirements and refers to FCC website search for FCC ID: 2AWCR-U850 to gain further information include SAR Values. This device complies with part 15 of the FCC rules.
