User`s guide

Signamax







065-7726SPOE / 065-7726SPOE-FP 24-Port 10/100BaseT/TX

PoE Managed Switch User Manual

Publication date: February, 2010

Revision A1.0

•

••

•

Set IP Address, Subnet Mask and Default Gateway IP Address

Please refer to Fig. 2-7 CLI Management for details about the ex-factory setting. They

are default setting of IP address. You can first either configure your PC IP address or change IP

address of the switch, next to change the IP address of default gateway and subnet mask.

For example, your network address is 10.1.1.0, and subnet mask is 255.255.255.0. You

can change the switch’s default IP address 192.168.1.1 to 10.1.1.1 and set the subnet mask to

be 255.255.255.0. Then, choose your default gateway, may be it is 10.1.1.254.

Default Value 065-7726SPOE Your Network Setting

IP Address

192.168.1.1

10.1.1.1

Subnet

255.255.255.0 255.255.255.0

Default Gateway

192.168.1.254 10.1.1.254

Table 2-3

After completing these settings in the switch, it will reboot to have the configuration taken

effect. After this step, you can operate the management through the network, no matter it is

from a web browser or Network Management System (NMS).

Fig. 2-8 the Login Screen for CLI

065-7726SPoE

065-7726SPoE#