TM CONNECTIVITY SYSTEMS 2 0 0 7
K E E P I N G Y O U R W O R L D C O N N E C T E D Signamax LLC, a US based company, is uniquely focused on providing high-performance networks and complex distribution solutions for customers worldwide. We provide complete unified products for copper and fiber based network connections designed for increased performance, reliability and easy installation. Signamax components are also popular for their valued performance/price ratio.
TM Table of Content Network Connectivity Systems A: VoIP IP Phones IP Camera IP SetTopBox IP DSLAM VoIP Gateway VoIP Gateway w. SIP Proxy Server VoIP Gateway w.
Keeping Your World In today’s technology driven environment, the backbone of your organization is your network—keeping you connected to staff, customers, suppliers, and the world at large. To run a successful enterprise, you need a network that is reliable, fast, and ready to accommodate the inevitable growth and change you will experience. And the company that can deliver network solutions that is up to those challenges is Signamax Connectivity Systems.
Connected The Signamax Premise Connectivity System enables you to build a network infrastructure that can accommodate all your network applications. It is comprised of wiring solutions for your equipment room, distribution cabling and crossconnects to your work-areas with a wide-range of high-performance copper & fiber-optic components, all designed to work together as a system.
NETWORK CONNECTIVITY SYSTEMS
TM VoIP A IP Phones IP Camera IP SetTopBox IP DSLAM VoIP Gateway VoIP Gateway w. SIP Proxy Server VoIP Gateway w.
A VoIP IP Phones Signamax, delivers stable, low-cost and fully featured IP telephones to customers. 065-9013 Signamax VoIP SIP Phone conforms to SIP standard and support ADSL, Cable Modem, LAN and WAN, ideal for both enterprise and home users. Two 10/100BaseT embedded switch/hub RJ-45 ports allow connect to office LAN and PC on your table. It is easily interface with ADSL/Cable Modem that is provided by ITSP, ISP or Carrier company to provide VoIP services to residential and SOHO application.
A VoIP SPECIFICATIONS 065-9005 PERFORMANCE CHARACTERISTICS Call Control Protocol: SIP (RFC2543/RFC3261) Codec: G.711 / G.729a Battery: 3.6 V, 1,350 mAhr Lithium Battery Life: 3.2 hr talk time, 24 – 26 hours standby Wireless Access Protocol: CSMA/CA Frequency Range: 2.4 – 2.497 GHz Number of Channel: Up to 14 channels Data Rate: 802.11b Direct Sequence Rate Scaling at 1, 2, 5.5, and 11 Mbps Range RF output: 30 mW peak Outdoor: 1,000 +ft./300 +m Indoor: Up to 295 ft.
A VoIP IP Camera Signamax 065-9001 Internet Camera and 065-9003 Internet Wireless Camera, a camera device that can be connected directly to an Ethernet or Fast Ethernet network also supported by the wireless transmission based on the IEEE 802.11g standard 065-9003. Compared to the conventional PC Camera, the Internet Camera features a built-in CPU and web-based solutions that can provide a cost-effective solution to transmit real-time high-quality video images and sounds for monitoring.
A VoIP SPECIFICATIONS IMAGE SENSOR Sensor resolution: 640 x 480 pixel Sensor: Color CMOS Sensor Lens: f: 6.0 mm, F: 1.
A VoIP IP Set Top Box MPEG-4 065-9021 is an IP STB fully compatible with ISMA standard. It is widely used in communities, hotels and broadband environment for receiving MPEG-4 liveprogram and VOD. Meanwhile, with the support of head-end system, 065-9021 can be used for video shopping, network games, support EPG and so on.
A VoIP SPECIFICATIONS Model 065-9021 MEDIA FORMATS Video Formats: MPEG-4 ISO/IEC 14496-2 Advance simple profile without GMC and QPEL Audio Formats: MP3 and AAC Picture Formats: JPEF and GIF static pictures NETWORK PROTOCOLS HTTP 1.0/1.1, DHCP, NTP1.1 and IGMPV1/V2., Supports IPv4 STREAMING PROTOCOLS Internet Streaming Media Alliance (ISMA) Implementation Specification version 1.
A VoIP IP DSLAM 065-9074/8 Series IP DSLAM has 24/48 ports subscriber line interface with POTS splitter built-in achieved 1U height space saving design. 065-9074/8 Series came with unique bandwidth management, flow prioritization and data flow security control key feature. 065-9074/8 Series provided QoS (quality of service) capability to meet triple play (voice, data, video) requirement, support ADSL/ADSL2/ADSL2+/G.SHDSL interface, stackable up to 8 065-9074/8 can be cascaded.
A VoIP VoIP Gateway Signamax 065-9051 is a one-port telephone gateway with IP sharing function. There is no necessary to set up any extra device that the embedded NAT function can allow user’s PC to gallop on internet directly. Further more users can take advantage of many new and exciting IP telephony applications by connecting analog phone to this gateway.
A VoIP VoIP Gateway w. SIP Proxy Server This Signamax 065-9400SVR and 065-9200SVR Series SIP Proxy Server is designed as an embeddedbased platform. It performs internet telephony services, like registration status, call detail record and security registration policy. The Signamax 065-9400SVR provides a comprehensive, powerful platform for delivering IP telephony applications based on the Session Initiation Protocol (SIP). It also build in VoIP 2/4 voice channels Gateway which support SIP signal protocols.
A VoIP Modular High Density VoIP Gateway By Modular hardware design 065-9850/065-9854/065-9858 Series makes any combination of the telephone interface. The Signamax 065-9850/065-9854/065-9858 Series VoIP Gateway is fully SIP and /H.323 standard compliant high density gateway that provides a total solution for integrating voice-data network and PSTN.
NETWORK CONNECTIVITY SYSTEMS
TM Media Converters 10/100 Switching Fibre Converters B 10/100 POE Switching Fibre Converters 10/100 PCI Switching Fibre Converters 10/100 Managed Fibre Converters 10/100 Mini Switching Fibre Converters Hardened 10/100 To 100BaseFx Converters with LFS Stand Alone Managed Media Converters Gigabit Fibre Converters 10/100/1000 Switching Fibre Optic Media Converters Serial to Fibre Converters Single Fibre WDM Converters Singlemode to Multimode Converters 12-Port Media Converters 16-Bay Converter Chassis 18-
B MEDIA CONVERTER SYSTEM Switching Fibre Converters Signamax Connectivity Systems’ Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT networks and the newer 100Base Fast Ethernet or 1000Base Gigabit Ethernet networks. These converters are designed to handle a wide variety of fibre optic network applications and eliminate the 412 meter distance limitation when connecting hub-based sub-networks at 100BaseFX.
B MEDIA CONVERTER SYSTEM SPECIFICATIONS APPLICABLE STANDARDS IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3u 100BaseFX IEEE 802.3ab 1000BaseT IEEE 802.3z 1000BaseSX FIXED PORTS Models 065-1100/1110/1170/1172/1174/1120/1120ED/1120XLD: 1 Auto-MDIX twisted-pair port meeting IEEE 802.3 10BaseT & IEEE 802.
B MEDIA CONVERTER SYSTEM 10/100 to 100BaseFX Power over Ethernet Fibre Media Converters The Signamax 065-1050 series media converters are 10/100BaseT/TX to 100BaseFX Power over Ethernet (PoE) devices that serve as Power Sourcing Equipment (PSE), which allows the converter to provide power to IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using the twisted pair connection.
B MEDIA CONVERTER SYSTEM SPECIFICATIONS APPLICABLE STANDARDS IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3u 100BaseFX IEEE 802.3af Power over Ethernet (PoE) FIXED PORTS models 065-1050ST, 065-1050SC, 065-1050SM, 065-1050SMED, 065-1050SMXLD: 1 Auto-MDIX twisted-pair port meeting IEEE 802.3 10BaseT & IEEE 802.
B MEDIA CONVERTER SYSTEM 10/100 Switching Managed Media Converters Signamax Connectivity Systems’ 065-1400 series Managed Switching Media Converters are modular SNMP-managed media converter cards available with a variety of interfaces to provide copper-to-fibre conversion for mission-critical networks.
B MEDIA CONVERTER SYSTEM Managed Gigabit Fibre Optic & Switching 10/100 Fibre Optic Media Converters PART NO.
B MEDIA CONVERTER SYSTEM 10/100BaseT/TX Switching PCI Fibre Optic Media Converters Signamax Connectivity Systems’ Switching PCI Fibre Optic Media Converters are an excellent solution for fibre-to-the-desktop installations where the workstation computers have pre-installed Network Interfaces.
B MEDIA CONVERTER SYSTEM 10/100BaseT/TX Switching Mini Fibre Optic Media Converters Signamax Connectivity Systems’ Switching Mini Fibre Optic Media Converters provide an intelligent solution for fibre optic connectivity where simplicity, low cost, and minimum footprint are the primary considerations. These converters are designed to handle both legacy 10BaseT and 100BaseTX Fast Ethernet devices on their twisted pair port while maintaining 100BaseFX Fast Ethernet transmission on the fibre optic port.
B MEDIA CONVERTER SYSTEM Hardened 10/100 To 100BaseFx Converters with LFS Signamax has responded to the demands of fibre optic deployment in rugged environments by introducing the 065-1800 series of hardened media converters. The 065-1800 series provides flexibility in connector types with the extended temperature and humidity ranges required for high-risk installations.
B MEDIA CONVERTER SYSTEM Stand Alone Managed Switching 10/100 Media Converters Signamax Connectivity Systems’ 065-1600 series Standalone Managed Switching 10/100 Media Converters are individually-housed SNMP-managed media converters available with singlemode and multimode interfaces to provide copper-to-fibre conversion for mission-critical networks.
B MEDIA CONVERTER SYSTEM Gigabit Media Converters Signamax Connectivity Systems’ Gigabit Ethernet Media Converters make it simple to extend distances over multimode or singlemode fibre. They are designed to expand the scope of your Gigabit Ethernet network applications and are 100% compliant with Ethernet IEEE 802.3ab and 802.3z specifications. These converters maintain the same form factor as other Signamax media converters, allowing use in the model 065-1185 16-Bay Signamax Rack Mount Chassis.
B MEDIA CONVERTER SYSTEM 10/100/1000 Switching Fibre Optic Media Converters Signamax Connectivity Systems’ 10/100/1000 Switching Media Converter provides an intelligent solution for long distance connections between legacy 10BaseT and 100BaseTX networks and the newer 1000Base Gigabit Ethernet networks.
B MEDIA CONVERTER SYSTEM Serial Data to Fibre/TP Media Converters Signamax Connectivity Systems’ Serial Data Fibre Media Converters make it simple to extend distances over multimode or singlemode fibre. They are designed to expand the scope of your RS-232 or RS-422/485 serial data applications, and are 100% compliant with EIA RS-232 unbalanced and both RS-422 & RS-485 4-wire balanced line specifications. Converters for both multimode and singlemode fibre are available in RS-232/-422/-485 configurations.
B MEDIA CONVERTER SYSTEM Single Fibre WDM Converters Signamax Connectivity Systems’ Switching Single Fibre Wave Division Multiplexing (WDM) Media Converters with Link Fault Signaling allow data typically carried over two strands of fibre optic cable to be carried over a single strand of fibre optic cable, utilizing two different wavelengths to carry signals in both directions simultaneously.
B MEDIA CONVERTER SYSTEM Singlemode to Multimode Converters Signamax Connectivity Systems’ Singlemode to Multimode Converters provide efficient solutions for interconnecting multimode fibre LANs over longer distances by integrating singlemode fibre optic cable into the LAN. They also enable Ethernet LAN and WAN connectivity, by providing a multimode interface to singlemode fibre carrier demarcation points.
B MEDIA CONVERTER SYSTEM 12-Port Rack Mount Media Converters The Signamax 065-1200 12-Channel Rack Mount Media Converter is a perfect solution for large installations that utilize many of the same type of media converters. The 065-1200 contains 12 channels of media conversion in a standard rack mountable case only one rack unit high. This extremely high port density allows the maximum number of media converter channels per rack for enterprise-level businesses and carriers.
B MEDIA CONVERTER SYSTEM 16-Bay Media Converter Rack Mount Chassis The Signamax 065-1185 16-Bay Media Converter Rack Mount Chassis provides higher rack mount media converter density for large installations that can accommodate rear access to the chassis for power supply maintenance. The 065-1185 provides 16 bays of space for all 065-11xx series Signamax media converters in a standard two rack unit high enclosure.
B MEDIA CONVERTER SYSTEM 18-Bay Rack Mount Managed Media Converter Chassis System The Signamax™ 065-1480 18-Bay Managed Media Converter Rack Mount Chassis provides full SNMP management capabilities for mission-critical installations. The 065-1480 provides 18 bays of space for all 065-14xx series Signamax managed media converters in a standard 2U high enclosure. It also includes the 065-1481 Management Module, which communicates with the Signamax 065-14xx series media converters on the chassis’ backplane.
NETWORK CONNECTIVITY SYSTEMS
TM Ethernet Switches 10/100 Mini Desktop Switches 10/100 16-Port Desktop Switches C 10/100 Rackmount Switches 10/100 WebSmart Switches Gigabit Access Switch Gigabit Access Switches Stackable/PoE Gigabit Desktop Switches Gigabit Rackmount Switches Gigabit WebSmart Switches Gigabit Management Switch Gigabit Management PoE Switches Fibre Desktop Access Switch Fibre Rackmount 100BaseFX Switch Fibre Rackmount 100FX Managed Switch Fibre Gigabit Acces Switch 4-Port Broadband Access Router Fibre Modules for Gig
C ETHERNET SWITCHES 5- & 8-Port 10/100 Desktop Switches Signamax Connectivity Systems’ Desktop Switches makes it easy to increase user capacity and let 10 and 100 Mbps devices directly communicate with each other. Full duplex mode multiplies total network capacity by providing up to 200 Mbps bandwidth per port rather than sharing 100 Mbps bandwidth between hub users, and segments networks for improved performance by forwarding traffic only to the users to whom the message was sent.
C ETHERNET SWITCHES SPECIFICATIONS APPLICABLE STANDARDS IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3x Flow Control ANSI/IEEE 802.3 NWay Auto-negotiation PORTS Model 065-7025A: 5 – RJ-45 10/100BaseT/TX Auto-MDI ports (IEEE 802.3 10BaseT; 802.3u 100BaseTX) Models 065-7028/065-7028A: 8 – RJ-45 10/100BaseT/TX ports (IEEE 802.3 10BaseT; 802.3u 100BaseTX) 16 – RJ-45 10/100BaseT/TX ports (IEEE 802.3 10BaseT; 802.
C ETHERNET SWITCHES Fast Ethernet 16-Port Desktop Switches The Signamax 16-port Ethernet Switches are designed to allow simultaneous transmission of multiple packets via an internal high-speed data channel. This means that it can partition a network more efficiently than bridges or routers in most environments. Signamax 16-port Ethernet Switch is a highly reliable network Switch and is the ideal device for bridging Ethernet to Fast Ethernet workgroups or networks.
C ETHERNET SWITCHES 10/100BaseT/TX Rack Mount Unmanaged Ethernet Switch Signamax Connectivity Systems’ 10/100BaseT/TX Ethernet Switches feature 16 or 24 10/100 ports, with the K19-7031 + 065-7031 and 065-7341 model offering an optional 100BaseFX multimode or singlemode fibre module for longer distance network connections. Fibre optic multimode or singlemode expansion module options allow installation of fibre cabling anywhere within your existing copper-based network.
C ETHERNET SWITCHES 16- & 24-Port WebSmart 10/100 Managed Ethernet Switches Signamax Connectivity Systems’ WebSmart 10/100 Ethernet Switches feature 16 or 24 10/100 ports, an optional 100BaseFX multimode or singlemode fibre module for longer distance network connections, and easy web-based administration. Fibre optic multimode or singlemode expansion module options allow installation of fibre cabling anywhere within your existing copper-based network.
C ETHERNET SWITCHES Gigabit Access Switch The Signamax Gigabit Access Switch 065-7737 with Mini GBIC and SNMP is a powerful, high-performance, layer 2 web-managed SNMP switch, which provides 24*10/100 Mbps Fast Ethernet ports, 2*Gigabit Ethernet ports and 2*mini-GBIC (Mini Gigabit Interface Converter) slots. The 2 Gigabit ports act as the robust pipe which link to the server or backbone for boosting the total system performance. The mini-GBIC slot enables Fibre connections.
C ETHERNET SWITCHES Gigabit Access PoE and Stackable Switches Signamax Connectivity Systems’ new stackable Gigabit Ethernet Power over Ethernet (PoE) Access Switch provides the capability to remotely power wireless access points, VoIP telephones, Powered Device (PD) media converters, and other devices that meet the IEEE 802.1af PoE standard. These switches provide non-blocking performance for two 10/100/1000BaseT/TX Dual Media Gigabit Ethernet ports plus 24 10/100BaseT/TX PoE-equipped ports.
C ETHERNET SWITCHES 5- and 8-Port 10/100/1000BaseT/TX Desktop Switches Signamax Connectivity Systems’ 10/1001000BaseT/TX Desktop Switches make it easy to increase user capacity and provide Gigabit Ethernet to devices in a small workgroup. Auto-sensing speed, duplex mode, and Auto-MDIX features automatically handle 10 Mbps, 100 Mbps, and 1,000 Mbps users.
C ETHERNET SWITCHES 16- & 24-Port 10/100/1000 Gigabit Ethernet Switches Signamax Connectivity Systems’ Plug-and-Play Gigabit Ethernet Switches feature 16 or 24 10/100/1000BaseT/TX twisted-pair ports to extend Gigabit Ethernet capability cost-effectively where high bandwidth is needed. Non-blocking switch architecture ensures full wire-speed throughput on all ports simultaneously. Model 065-7930 Model 065-7940 16- & 24-Port 10/100/1000 Gigabit Ethernet Switches PART NO.
C ETHERNET SWITCHES WebSmart Gigabit Ethernet Switches Signamax Connectivity Systems’ 8-Port WebSmart™ Gigabit Ethernet Switch features eight 10/100/1000BaseT/TX twisted-pair ports to extend Gigabit Ethernet to your servers and workstation users with high-bandwidth requirements. This switch also includes advanced support for port-based Virtual Local Area Networking (VLAN) and multi-port inter-switch trunking for use in larger-scale networks.
C ETHERNET SWITCHES Gigabit Management Switch The 065-7840/065-7850 is a L2 managed Gigabit switch that supports SNMP, Web UI and CLI management interface. It is equipped with 24/8 Giga TP ports and 2/16 Giga ports which accommodate optional SFP modules. In addition, the switch implements the QoS (Quality of Service), Mac Filtering Policy, Port Mirror, VLAN and full L2 protocol. It is suitable for workgroups or WAN edge application. Model 065-7840 Gigabit Management Switch PART NO.
C ETHERNET SWITCHES Signamax Gigabit POE Management Switch series Signamax Gigabit switch 065-7820 POE supports 12x 10/100/1000 Mbps Autonegotiation, Auto-MDIX Ethernet ports and Power over Ethernet to IEEE 802.3af compliant devices. It’s fully compliant with the standards of IEEE 802.3/u/x/z/ab/af. It is equipped with 12 Giga TP ports and 2 of which are dual media ports that accommodate optional 10/100/1000Base-T or SFP modules.
C ETHERNET SWITCHES Compact Fibre Access Switch Signamax’ Connectivity Systems’ Compact Fibre Access Switches provide the right port interface you need for fibre-extended networks. The 065-7111 series of switches allows cost-effective fibre extension to small workgroups and Programmable Logic Controller (PLC) clusters.
C ETHERNET SWITCHES 8-Port 100BaseFX Fibre Switch Signamax Connectivity Systems’ 8-Port 100BaseFX Fibre Switch is a plug-and-play Fast Ethernet switch that is the ultimate in easy 100Base FX fibre connection for simple multimode fibre applications. Standard 1U high non-blocking switch chassis supports eight multimode SC or eight multimode ST ports; each is equipped with a DIP switch for full or half-duplex mode selection. 8-Port 100BaseFX Fibre Switch PART NO.
C ETHERNET SWITCHES 24-Port 100FX Ethernet Fibre Switch Signamax Connectivity Systems’ model 065-7640AFSC and 065-7640AFSM Fast Ethernet Fibre Switches connect workstations and servers using fibre optic cable where Gigabit Ethernet connections are not desired. These non-blocking 24-port 100BaseFX Fast Ethernet switches have SNMP, Web-browser, local terminal connection and Telnet remote terminal management capabilities included, to build a fibre-based enterprise-level network at Fast Ethernet speeds.
C ETHERNET SWITCHES 24-Port Gigabit Ethernet Fibre Switch Signamax Connectivity Systems’ model 065-7732AFSC Multimode and 065-7732AFSM Singlemode Fibre Gigabit Ethernet Access Switches are the most cost-effective way to extend fibre to the desktop from a Gigabit Ethernet fibre backbone. Model 065-7732FSC provides two 1000BaseSX multimode fibre optic ports plus 24 100BaseFX multimode fibre optic ports, typically used in Local Area Network (LAN) applications.
C ETHERNET SWITCHES 4-Port Broadband Access Router The Signamax 065-1507 Broadband Access Router is an intelligent solution for sharing Calble Modem or DSL services between home computers, small office computers, or branch office installlation. The built-in 4-port switch facilitates file sharing at either 10 Mbps or 100 Mbps, automatically determining the fastest possible connection speed and duplex mod.
C ETHERNET SWITCHES SFP Fibre Modules 065-77MM 065-77SM SFP Fibre Modules for Gigabit Switches PART NO. DESCRIPTION 065-77MM SFP Fibre Module, Connector LC Multimode 065-77SM SFP Fibre Module, Connector LC Singlemode 065-77WDMA SFP Fibre Module Connector LC Singlemode WDM, Rx=1,550, Tx=1,310 065-77WDMB SFP Fibre Module Connector LC Singlemode WDM, Tx=1,550, Rx=1,310 065-77CWDM1470 SFP Fibre Module LC Singlemode CWDM, 1.25Gbps, 3.
NETWORK CONNECTIVITY SYSTEMS
TM Network Interface Cards D Gigabit Ethernet PCI Adapter Cards Fast Ethernet PCI Adapter Cards
D NETWORK INTERFACE CARDS Gigabit Ethernet PCI Adapter Card Signamax Connectivity Systems’ Gigabit network adapter cards are used wherever it is necessary to provide Gigabit Ethernet capability directly into a server or workstation. These cards utilize the new high-speed 64/32-bit PCI Bus Mastering architecture and support IEEE 802.1p Quality of Service (QoS) and 802.1Q VLAN Tagging standards for complete network optimization. The model 098-1122 twisted-pair LAN card supports the IEEE 802.
D NETWORK INTERFACE CARDS 10/100 Mbps Fast Ethernet PCI Adapter 098-1111, the most cost-effective solution for end users, is equipped with Auto-negotiation function. Auto-negotiation function has become the basic requirement of network adapters. It automatically supports data transmission speeds ranging from 10 Mbps to 200 Mbps. This function smoothly and automatically switches drivers between 10 Mbps and 100 Mbps, Full-or Half-duplex, LAN connections.
NETWORK CONNECTIVITY SYSTEMS
TM KVM Switches 2-Port Compact KVM Switch E 2- and 4-Port Multimedia KVM Switches 4-Port Slim Desktop Switch 8-Port Cascadable KVM Switches 8- and 16-Port Rackmount KVM Switches KVM Hydra Cables VGA Splitter KVM over IP
E KVM SWITCHES 2-Port Compact KVM Switch Signamax Connectivity Systems’ CommandView is the perfect solution for convenient control of two computers from just one keyboard, monitor, and mouse. Quick, simple connection and you’re in total control. No software required; completely plug & play. Select any computer with push-button ease. Auto Scan at user selectable intervals. Dedicated keyboard & mouse emulation.
E KVM SWITCHES 2- and 4-Port Multimedia KVM Switches Signamax Connectivity Systems' CommandView KVM switch is a high performance yet low cost console (Keyboard, Mouse, Monitor, Speaker and Microphone) sharing switch for IBM compatible PCs. You can control any 2 or 4 PS/2 style PCs with only one set of Keyboard, Mouse, Monitor and Headset console devices.
E KVM SWITCHES 4-Port Slim Desktop PS/2 KVM Switch 4-Port Slim Desktop PS/2 KVM Switch with Audio&Mic for SOHO and office multimedia applications. The 098-8040 Slim Desktop PS/2 KVM Switch provides Audio and Microphone switching function for SOHO and office desktop multimedia application. And it allows you to access, control, boot and reboot four PS/2-enabled multimedia computers using only one keyboard, video, mouse and optional speaker set and microphone.
E KVM SWITCHES 8-Port Cascadable KVM Switches Signamax Connectivity Systems’ CommandView offers on-screen control in a full-featured, high performance KVM Switch. The on-screen display feature makes it easy to configure and control up to 64 computers from just one standard monitor, keyboard and mouse. You can name each computer system, making it easy to know which particular computer is currently under your control.
E KVM SWITCHES 8- and 16-Port 19" Rackmount KVM Switches The 098-8280/098-82160 are 8- and 16-Port cascadable 19" Rackmount KVM Switches with OSD. They are designed to provide robust and reliable KVM switching performance under harsh and critical environment either in corporate office or on industrial floor. OSD Menu offers more intuitive and convenient control. The full-feature OSD gives an intuitive menu-driven operation most users will find dispensable for a truly convenient experience.
E KVM SWITCHES SPECIFICATIONS Model 098-8280 PC Ports: 8 Console Port: 1 Daisy-chain port: 1 Daisy-chain level: Up to 16 levels Max.
E KVM SWITCHES KVM Hydra Cables Tangle-proof, single-cable design combines monitor, keyboard and mouse cables into a single, flexible bundle. Available in two types and in a variety of lengths for connection between CommandView KVM switches and your computers, and also as an extension between your monitor, keyboard, and mouse to the CommandView KVM switch. 098-C018 098-C050 C65T-6B C-65T-10B KVM cables for Multimedia KVM Switches PART NO. DESCRIPTION 098-C015 KVM cable for 1.
E KVM SWITCHES 2 and 4 Port VGA Splitter Signamax Video Splitter is a VGA/SVGA/QXGA splitting device which boosts video signal from one PC to 2/4/8 monitors. Its built-in 300 Mhz Video Amplifier not only extends the transmission distance up to 210 ft (65 m) but also gains multiple high quality screens. It is very suitable for multiple display applications, such as Stock market monitor array, Educational demos, Airport & Railway station bulletin display. VGA Splitter PART NO.
NETWORK CONNECTIVITY SYSTEMS
TM Wireless LAN 2.4 GHz WiFi Access Point F 2.4 GHz WiFi AP/Router 11g+ 2.4 GHz WiFi ADSL Router 11g 2.4 GHz WiFi PCI Card 11g+ 5 GHz Wireless Router 5 GHz Wireless Access Point 5 GHz Wireless PCI Card 5 GHz Wireless PCMCIA Card 5 GHz Wireless USB Dongle Antenna series for 2.
F WIRELESS LAN 802.11g Wireless External Antenna Access Point Signamax 802.11g Access Points are the ideal solution for any network administrator who needs to expand the capacity of the wireless network. This is especially applicable to wireless networks in high traffic areas such as airports, coffee shops, shopping centers, sporting venues, and university campus deployments. At transfer rates of up to 54 Mbps. In addition to bridging 802.
F WIRELESS LAN 54/108 Mbps Wireless Broadband Router Signamax 065-1786 is an IEEE 802.11g compliant wireless router with a built in four-port fast Ethernet switch. It brings the latest wireless technology with high speed up to 54 Mbps and 108 Mbps turbo mode and is backwards compatible with all the existing 802.11b products. This high-performance IEEE 802.
F WIRELESS LAN Signamax Wireless ADSL Modem/Router Signamax 065-1787, an economic combination of ADSL modem, Broadband Router, 802.11g Access Point, and 4-Port Switch. It is designed for SOHO and home users. It provides Internet access to all your LAN/WLAN users. 065-1787 is compliant with UR2 (Annex B) for ISDN environment. 065-1787 has an integrated 802.11g 54 Mbps Wireless Access Point, allowing simple and flexible access to all LAN or Internet resources by wireless users.
F WIRELESS LAN Signamax Wireless AP/Router 802.11g Signamax Wireless AP Router 065-1788, IEEE802.11g standard compliant, is a high quality and reliable Internet routing and security device, enables multiple users to share the Broadband Internet connection with or without wires through a Cable or DSL modem. Simply install the router, connect to Cable/DSL modem, and surf Internet without extra efforts.
F WIRELESS LAN 54/108 Mbps Wireless PCI Card Signamax 065-1795 let you connect your desktop computer to a wireless network, and is suitable for small offices, home offices and places where cable can not be installed. At transfer rates of up to 54 Mbps and 108 Mbps turbo mode in the 2.4 GHz frequency range, users connected will enjoy faster downloads and truly instant email communication.
F WIRELESS LAN Wireless Broadband Router 802.11a/b/g 065-1756 Wireless 802.11A+G Broadband Router is a complete all-in-one networking solution for homes and small/medium enterprises. With its built-in 4 10/100 Mbps auto-sensing Ethernet switch ports, users can link multiple computers to Internet without any hassle. The built-in wireless function can let you connect wirelessly with your desktop or notebook computers from up to 300 meters away, and simultaneously in wireless A and G.
F WIRELESS LAN 5 GHz Indoor Access Point/Client/Bridge Signamax 065-1755 Wireless 11a+g Dual-Band Access Point can be accessed in all three 802.11 wireless networks. 065-1755 contains two separate wireless connectivity radio transceivers, which support all three popular wireless networking specifications. One of the two transceivers uses 2.4 GHz frequency band and supports both wireless 802.11b and 802.11g, which offers up to 11 Mbps and 108 Mbps data rate respectively.
F WIRELESS LAN Wireless PCI Card 802.11a/b/g Signamax 065-1750 Wireless 11a/b/g PCI Adapter offers high-speed wireless connection with a data rate up to 108 Mbps. 065-1750 supports seamless roaming from cell to cell in all types of wireless networks. You can place your desktop computers anywhere at home or in the office building without any wire limitation.
F WIRELESS LAN Wireless PCMCIA Card 802.11a/b/g The 065-1751 Wireless 11a/b/g CardBus Adapter offers high-speed wireless connection with a data rate up to 108 Mbps. It can provide the speed you need for large file download, digital video and audio transmissions. 065-1751 supports seamless roaming from cell to cell in all types of wireless networks. You can place your notebook anywhere at home or in the office building without any wire limitation.
F WIRELESS LAN Wireless USB Dongle Adapter 802.11 a/b/g The 065-1752 Wireless 11a/b/g USB Dongle offers high-speed wireless connection with a data rate up to 108 Mbps. It can provides the speed you need for large file download, digital video and audio transmissions. 065-1752 supports seamless roaming from cell to cell in all types of wireless networks. You can place your desktop computers anywhere at home or in the office building without any wire limitation.
F WIRELESS LAN Antenna series for WiFi units 065-2412 065-2408 Signamax antennas for 2,4GHz band 065-2411 PART NO.
F WIRELESS LAN Signamax Antennas for 5 GHz band (5,400 – 5,725 and 5,725 – 5,875 GHz) SPECIFICATIONS 065-5808 Frequency Range: 5,725 – 5,875 MHz Gain: 8 dBi Vertical Beamwidth: 16° Horizontal Beamwidth: 360° VSWR: <1.5 Nominal Impedance: 50 Ω Polarization: Vertical Max Power: 100W Dimension: >20 x 350 mm Weight: 200 g Connector: N female Rated Wind Velocity: 60 m/s 065-5812 Frequency Range: 5,725 – 5,875 MHz Gain: 12dBi Vertical Beamwidth: 7° Horizontal Beamwidth: 360° VSWR: <1.
F WIRELESS LAN Signamax Antennas for 5 GHz The Signamax Antennas are designed by Signamax for the 5GHz communication system. After structure optimized and being tuned carefully, it has excelent performance such as very good VSWR, high gain nad big F/B Ratio etc. The strong structure and small dimension make it easy to install. Each antenna is tested by HP network analyzer strictly before delivery. 065-5020 Antennas for 5 GHz communication system PART NO.
F WIRELESS LAN SPECIFICATIONS 065-5018 Frequency Range: 5,150 – 5,875 MHz Gain: 18 dBi Vertical Beamwidth: 20° Horizontal Beamwidth: 20° VSWR: <1.5 Nominal Impedance: 50 Ω Polarization: Vertical / Horizontal Max Power: 100W Dimension: 190 x 216 x 50 mm Weight: 1.1 kg Connector: N female Rated Wind Velocity: 60 m/s 065-5020 Frequency Range: 5,150 – 5,875 MHz Gain: 20 dBi Vertical Beamwidth: 16° Horizontal Beamwidth: 16° VSWR: <1.
NETWORK CONNECTIVITY SYSTEMS
TM Structured Cabling G Introduction to Structured Cabling What is Structured Cabling? Structured Cabling Testing 10GBaseT and Structured Cabling
G STRUCTURED CABLING Introduction to Structured Cabling History Until the beginning of the 1980’s, the majority of computer networks worked in the host/terminal mode. Applications as well as data were stored centrally on a host computer and user stations, so-called terminals, handled them in this centralized way. Considering the text character of this type of communication, it was not necessary to build special high capacity transmission paths in terminal networks.
G STRUCTURED CABLING Introduction to Structured Cabling Currently existing categories Category 3—this is the first and thus oldest category in structured cabling. In the beginning, Category 3 components were used for both voice and data transmissions. The bandwidth was defined up to 16 MHz with data rates of 10 Mbps. Today, Category 3 is predominantly used only for telephone distribution systems (e.g. connection from ISDN patch panels to telephone PBX board, telephone equipment cords etc).
G STRUCTURED CABLING Introduction to Structured Cabling In the ISO/IEC 11801 generic cabling standard document, further copper cabling distinctions referred to as “Classes” were introduced. Classes are used for classifying the permanent link or channel performance rather than for rating the individual structured cabling components. The brief description of all classes as specified in the ISO/IEC standard is the following: Class A – analogue voice telephony with the bandwidth of up to 10 KHz.
G STRUCTURED CABLING Structured Cabling Testing Testing has a major significance for the correct functionality of structured cabling. Testing devices are able to measure installed components and determine whether all requirements defined in the international standards necessary for reliable operation have been met.
G STRUCTURED CABLING Structured Cabling Testing ACR (Attenuation to Crosstalk Ratio) ACR is a theoretical parameter (i.e. it is not measured but is deduced from two previously measured values) which shows the margin between the NEXT and attenuation values: ACR [dB] = NEXT [dB] - A [dB]. If the level of attenuation meets or approaches the level of near end cross-talk, the transmitted signal will be lost. The interval between NEXT and attenuation must be at least 10 dB.
G STRUCTURED CABLING Structured Cabling Testing Length There is a direct proportionality between the length and attenuation (i.e. the longer the length of cable, the higher the attenuation). Testing devices use so-called TDR (Time Domain Reflectometery) for measuring lengths. This means that a pulse is sent down the cable, then it is reflected back onto the remote unit, and subsequently the time during which the pulse travels the whole track is recorded. Based on the NVP (i.e.
G STRUCTURED CABLING 10GBaseT and Structured Cabling Gigabit Ethernet was, until recently, considered to be the limit that would be very difficult to overcome on metallic structured cabling. Now it is obvious that 1Gbps will not be the maximum transmission rate that can be achieved on copper twisted pair cables. The new 10GBaseT Ethernet standard that has recently been published by the IEEE 802.3an group proves this.
G STRUCTURED CABLING Signamax Category 7 shielded cable parameters (at temperature of 20°C). The cable supports 10GBaseT. See page K1 for more. f (MHz) Attenuation (dB/100 m) NEXT (dB) PS-NEXT (dB) ACR (dB/100 m) PS-ACR (dB/100 m) ELFEXT (dB/100 m) PS-ELFEXT (dB/100 m) Return loss (dB) 1 1.8 100 97 98 95 105 105 – 4 3.4 100 97 97 94 105 102 27 10 5.4 100 97 95 92 97 94 30 16 6.8 100 97 93 90 93 90 30 20 7.7 100 97 92 89 91 88 30 31.2 9.
NETWORK CONNECTIVITY SYSTEMS
TM Work Area Outlet Systems H Category 6 Wall Outlets Category 5e Wall Outlets Category 6 Keystone Jacks Category 5e Keystone Jacks Keystone Jack Modular Outlets Keystone Multimedia Modules
H WORK AREA Category 6 Wall Outlets Signamax Category 6 outlets are designed for an easy installation. This is ensured by strain relief providing cable positioning and screening contact between the shielded cable and metallic outlet housing. The outlet has a slim design and excellent EMC performance. The modular construction of the outlet allows flush mounting or wall mounting installation using universal back box.
H WORK AREA Category 6 Keystone Jacks Signamax Connectivity Systems Category 6 Keystone Jacks have been designed to meet the need for high-bandwidth applications. Category 6 connectors are slim in profile for the highest density applications, and are engineered to exceed all TIA/EIA-568-B.2-1 Category 6 permanent link and channel level requirements. Category 6 jacks are fully tested to 250 MHz.
H WORK AREA Category 5e Keystone Jacks Category 5e Keystone Jacks exceed permanent link and channel level requirements as defined in TIA/EIA-568-B.2 and are fully tested to 155 MHz. Provide a sound platform for supporting all today's network operating systems including Gigabit Ethernet. Category 5e jacks can be terminated with industry standard 110 or Krone termination tools and feature color-coding for both T568A and T568B wiring.
H WORK AREA Keystone Jack Modular Outlets Modular outlets from Signamax are dedicated to be user-friendly solution for customers who need high modularity in reasonable quality. Contains wide range of outlets and frames, each usable for all keystone jacks, modular jacks and faceplates from our portfolio. KJGM-WH KJGM-WH – back Keystone Jack Modular Outlets PART NO.
NETWORK CONNECTIVITY SYSTEMS
TM Patch Panels I Category 6 Shielded Patch Panels Category 6 Unshielded Patch Panels Category 5e Shielded Patch Panels Category 5e Unshielded Patch Panels ISDN Patch Panels
I PATCH PANELS Category 6 Shielded Patch Panels Signamax shielded Category 6 patch panel is designed to be used with other Category 6 components as part of complete high-performance solution. The panel meets all electrical parameters specified in the TIA/EIA 568-B.2-1, ISO/IEC 11801:2002 and EN 50173-1 standards. It supports both T568A and T568B wiring configurations using an easy to read color-coded wiring label. Each port of the Signamax Category 6 panel is sequentially numbered for easy administration.
I PATCH PANELS Category 6 Unshielded Patch Panels Signamax Category 6 unshielded patch panels are designed to exceed TIA/EIA-568-B.2-1, ISO/IEC 11801:2002 and EN 50173-1 performance specifications providing usable bandwidth beyond 250 MHz. These high-density panels are available in 12- through 48-port versions and feature enhanced front and rear labeling for easy circuit identification.
I PATCH PANELS Category 5e Shielded Patch Panels Signamax Category 5e shielded patch panel is designed to exceed TIA/EIA-568-B.2, ISO/IEC 11801:2002 and EN 50173-1 performance specifications providing usable bandwidth beyond 155 MHz. This panel is available in 24-port version and features enhanced front and rear labeling for easy circuit identification. The panel supports both T568A and T568B wiring configurations using an easy to read color-coded wiring label.
I PATCH PANELS ISDN Patch Panels Signamax ISDN Category 3 patch panel is a high-density telecommunication panel with 25 and 50 standard RJ45 jacks. The panel meets all latest standards and electrical parameters and is designed for termination of two pair cable in Krone termination blocks. Printed circuit board together with high quality components ensures the Category 3 performance. Integrated back cable management for separate cables provides organized and secure installation. All ports are numbered.
NETWORK CONNECTIVITY SYSTEMS
TM Patch Cords/Testers J S-FTP Category 6 Patch Cords S-FTP Category 5e Patch Cords UTP Category 6 Patch Cords UTP Category 5e Patch Cords T-Adapters and Testers Inline Couplers and Connection Boxes
J PATCH CORDS S-FTP Category 6 Patch Cords Signamax shielded Category 6 patch cables with high quality Category 6 connector are assembled using 26 AWG individually shielded pairs patch cable. The high quality Category 6 plugs are plated by gold over nickel on polished bronze for up to 2,500 plug cycles. Protection provided by rubber boots prevents pair-to-pair disturbance inside the body of the connector and increases performance of the patch cable.
J PATCH CORDS UTP Category 6 Patch Cords Signamax continues to set the standard for high-quality, highperformance patch cords. These Category 6 cables are manufactured to the strictest performance requirements as specified in TIA/EIA-568-B.2-1, ISO 11801:2002 and EN 50173-1 using the highest-level connector design and cable construction. Signamax category 6 patch cords incorporate slim-profile snag-free boots, which protect the plug latch, and a flexible, but durable cable strain relief.
J PATCH CORDS UTP Category 5e Patch Cords Signamax unshielded Category 5 Enhanced patch cables with high quality connector are assembled using high quality 26 AWG patch cable. High quality plugs are plated by gold over nickel on polished bronze for up to 2,500 plug cycles. Protection provided by molded boots prevents pair-to-pair disturbance inside the body of the connector and increases performance of the patch cable.
J PATCH CORDS T-Adapters and Testers When installing a cabling system, checking for open or short circuits is always a requirement. Signamax remote cable testers answer the need for testing T568A, T568B, 10BaseT, 10Base2, 10Base5 and Token Ring systems, for UTP and STP cabling.
NETWORK CONNECTIVITY SYSTEMS
TM Installation Cable K S-STP Category 7 Installation Cable FTP Category 6/6a Installation Cable UTP Category 6 Installation Cable UTP Category 5e Installation Cable
K INSTALLATION CABLE S-STP Category 7 Installation Cable Signamax Category 7 shielded installation cable complies with the most stringent parameters with significant headroom for installation safety. Selected design goes hand-in-hand with the best quality which, with strictly controlled production, guarantees the highest performance. The shielded Category 7 installation cable is produced in S-STP configuration (PimF—Pair in metal foil) and is tested up to 900 MHz.
K INSTALLATION CABLE FTP Category 6/6a Installation Cable Signamax Category 6/6a FTP installation cable is manufactured to the highest quality standards and easily exceeds all applicable performance specifications for Category 6 as defined in TIA/EIA-568-B.2-1, ISO/IEC 11801:2002 and EN 50173-1. Moreover, this Signamax installation cable is tested up to 500 MHz and its excellent performance at this high bandwidth ensures its compliance with the new Category 6a.
K INSTALLATION CABLE UTP Category 6 Installation Cable Signamax Category 6 unshielded installation cable is designed to provide the highest level of transmission performance to meet the needs of today's most advanced voice and data networks. Category 6 cables support 10Base-T through 1000Base-T/TX protocols for data rates up to 1 Gb/s and exceed the requirements of TIA/EIA-568-B.2-1, ISO 11801:2002 and EN 50173-1 standards.
K INSTALLATION CABLE UTP Category 5e Installation Cable The Category 5e unshielded installation cable is mostly used cable for data transmission where no electromagnetic disturbance is a problem. Supplied as part of complete Signamax Category 5e solution, the cable represents one of the key elements for safety and economical data transfer. Sophisticated cable design ensures very low electromagnetic emitency and low crosstalk. All parameters exceed requirements specified by TIA/EIA 568-B.
NETWORK CONNECTIVITY SYSTEMS
TM Fiber Optic Systems L Fiber Optic Patch Cords Fiber Optic Adapters Fiber Optic Patch Panels Wall Mount Fiber Optic Box
L FIBER OPTICS Fiber Optic Patch Cords Fiber optic patch cords are suited for equipment jumper cable, cross connects, and work area connections. All patch cords are manufactured using OFNR riser grade cable and are 100% factory tested to ensure performance to TIA/EIA-568-B-2, ISO 11801:2002 and EN 50173-1 standards. ST/ST, SC/SC and hybrid ST/SC Patch Cords are available in both multimode (62.5/125 µm and 50/125 µm) and singlemode cable-types, in duplex and simplex versions.
L FIBER OPTICS Fiber Optic Patch Cords Signamax MTRJ and LC fiber optic patch cords suited for equipment jumper cable, cross connects, and work area connections. All patch cords are manufactured using OFNR riser grade cable and are 100% factory tested to ensure performance to TIA/EIA-568-B-3, ISO 11801:2002 and EN 50173-1 standards. MTRJ/MTRJ, LC/LC and hybrid MTRJ and LC to ST and SC multimode (62.5/125 µm and 50/125 µm) patch cords are available.
L FIBER OPTICS Fiber Optic Adapters SIGNAMAX Premise Connectivity System Fiber optic connectors are offered in wide range of types. All standard shapes are offered in both multimode and singlemode construction. Signamax offers a wide variety of fiber optic adapters including ST, SC, LC and MTRJ. Our ST and SC adapters are available with a phosphor bronze sleeve for universal applications (MM/SM). All SC, LC and MTRJ adapters are provided with retaining clips for easy, snap-in mounting.
L FIBER OPTICS Fiber Optic Patch Panels Signamax 19" Rack mountable fiber optic patch panel is designed for direct fiber optic cables termination. Standard size is 1U. The patch panel is modular and contains two parts—body and faceplate for several adapter types and count. Panel has fully metal massive construction for usage in critical environments and can be easily pulled out with no need to be dismantled from the rack.
NETWORK CONNECTIVITY SYSTEMS
TM Data Racks 19" Data Racks M 19" Server Racks 19" Wall Mounted Racks 19" Mounted Rack Signamax 19" Profile Frames 19" Fan Units 19" Shelves Diode Lighting Unit Accessories
M DATA RACKS 19" Data Racks Attractive design and high quality are hallmarks of these data racks. Their basic framework is welded metal plate, multiple-bent for the strength and rigidity necessary for heavier equipment. All profile moldings are flexible and adjustable. Vent slots in the upper or lower cabinetry allow airflow for efficient cooling. The door is made of safety glass, and can be mounted for either left or right-hand opening on either the front or rear of the data rack.
M DATA RACKS 19" Data Racks PART NO.
M DATA RACKS 19" Server Racks Signamax 19" Server Racks are especially suitable for server instalation, but all other 19" components and accessories can be installed as well. Back of the rack is perforated and allows higer air flow. All other attributes are identical with regular Signamax 19" Data Racks (see page M1). 19" Server Racks M3 PART NO.
M DATA RACKS 19" Wall Mounted Racks Vent slots in the upper and lower part of the Signamax Wall Mounted Data Rack allow sufficient airflow inside. Can be mounted upside-down, enabling the door to be opened from the left or right. Wall section can be directly hinged on the wall or by means of a fixed frame. Front door is made of safety glass. The rack is lockable. Center section lock system can be unlocked separately. 19" Wall Mounted Racks – not divided PART NO.
M DATA RACKS 19" Assembled Data Rack The Signamax Assembled Rack is suitable for installation of structured cabling components—e.g. patch panels, active equipment and telecommunication cabling components. The design of the rack is accommodated to fit most computing and data centers. Rack Description This 19" Assembled Data Rack consists of assembled skeleton. The front side door is mounted using three hinges and secured by 1-point lock. The safety glass used in the door assembly provides high safety.
M DATA RACKS Table of standard Rack dimensions PART NO.
M DATA RACKS 19" Fan Units Signamax 19" Fan Units are constructed to fit into all Signamax 19" Data Racks, to provide forced airflow inside. Fits in lower as well as in the upper part of the rack. Standard and recommended installation is in the lower part of the rack to ensure a proper “chimney-effect”, which supplies the rack with fresh air. Fan units allow airflow of up to 160 m3/hour. All fan units are equipped with a thermostat to regulate the airflow for temperatures in the range of 0° to 60°C.
M DATA RACKS 19" Shelves Signamax shelves for keyboard, documentation and LCD monitor are designed for the installation into the 19" data rack profiles. Shelves with lockable drawers for safe stowage of service documentation and shelves with an integrated computer keyboard and monitor occupy the space of 1U. This gives you more room in the data rack. Documentation shelf opened Keyboard shelf opened Keyboard and documentation shelves PART NO.
M DATA RACKS 19" Shelves Signamax 19" shelves are convenient for equipment not designed for 19" installations. Our product range includes shelves for fixed and drawer-style installations. Drawer-style system enables easier access to the equipment being used. Ventilated bottom assures cooling airflow to the equipment. Shelf supports and mounting brackets are included. Fixed shelves are available in depths from 150 mm to 550 mm. Sliding shelves are available in depths from 250 mm to 450 mm.
M DATA RACKS 19" Diode Lighting Unit The 19" diode lighting unit is constructed as a compact fixture designed for installation into 19" distribution board frames for illumination of equipment installed within distribution board. The ON/OFF pushbutton and the LED-signaling that indicates On/Off state are located on the face of the unit. The rear side is equipped with a socket for power feed. The underside of the unit is fitted with the line of LED—i.e. the light is directed downwards.
M DATA RACKS Accessories These base frames are suitable for all Signamax data racks and are used for fixing the rack to the floor to assure stability. Cable inlets placed on each side of the base are covered by a filter grid. Filter grid can be removed to insert cables inside. Adjustable feet for 19" Data racks are to compensate for uneven floors and to assure high stability. REC-RB-66BF REC-CB Blanking panels PART NO.
M DATA RACKS EPCM1-4/8 Accessories Ring brackets are used for organizing cables inside of the enclosure. Cables are organized by vertical or horizontal organizer brackets. Two mounting sets allow multiple placement possibilities within the data rack. Metal brackets have a polished surface texture. 19" cable organizer with 5 plastic rings and side protection is designed for easy and fast management of patch cords and other cables. EPCM2-4/8 EPCM3-4/8 EPCM4-4/8 Cable Management Ring Brackets PART NO.
NOTES Notes NETWORK CONNECTIVITY SYSTEMS www.signamax-eu.
Certificates Signamax Connectivity Systems are certified by independent testing laboratories. Bellow you can find the certificates that Signamax obtained from Third Party Testing laboratory (also known as 3P) for Category 5e Unscreened, Category 5e Screened, Category 6 Unscreened, and Category 6 Screened products. All certificates can also be downloaded at our Signamax web page www.signamax-eu.com.
YO U R D I S T R I BU TO R TM © Copyright by ASPRA, a.s. and Pavlina Kralova. Any copying of this document without the author's consent is not allowed.