Installation Sheet

3
5. After all feet are attached, flip the tub over and allow
it to rest on the floor.
Important: Do not lift the tub by the feet. Be sure to
lift the tub by the rim and body only.
6. If the tub feet do not sit flush on the floor, shims may
need to be added to the feet. To add shims, remove
the foot and install the shim between the foot and the
foot bolt. When the foot is alligned properly, secure it
back to the tub.
CAST IRON CLAWFOOT TUB
Cast Iron Clawfoot Tub Installation Instructions
Shim