Manualshelf

Installation Sheet

ManualsBrandsSignature Hardware ManualsShop All Signature HardwareSignature Hardware Luxury Mahogany Oak Round Closed-Front Toilet Seat with Soft Close
1
1Toilet Seat Installation Instructions
TOILET SEAT
INSTALLATION
Before installing, read entire Toilet Seat Installation Instructions. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you nd damages, do not install. Contact Customer Service
at 1-866-855-2284. If you need assistance or have questions while installing your seat, contact Customer Service.
We recommend consulting a professional if you are unfamiliar with installing bathroom xtures. Signature Hardware
accepts no liability for any damage to the seat or for personal injury during installation.
TOOLS AND MATERIALS:
INSTALLATION
1. Make sure that the hinges or hinge caps on the new toilet seat are open.
2. Set the seat on the toilet and drop the mounting bolts through the open hinges’ mounting holes on the toilet.
3. Thread the mounting nuts onto the bolts and hand tighten.
4. Verify that the toilet seat is in the proper position. Adjust as necessary and nish tightening the mounting nuts with
your adjustable wrench to secure.
5. Lock the hinge caps over the bolts.
Adjustable Wrench

Summary of content (1 pages)