Manualshelf

Installation Sheet

ManualsBrandsSignature Hardware ManualsShower FaucetsSignature Hardware Gooseneck Hand Shower Conversion Kit with Brass Shower Head, Porcelain Lever Handles and 54" x 27" D Curtain Ring
123456
2
SHOWER CONVERSION KIT WITH HAND SHOWER
4. Insert the lower riser pipe into the top of the hand
shower diverter and secure it by tightening the riser
nut. Apply a bit of thread sealant or plumber’s tape to
the threads before tightening. Use an adjustable
wrench to tighten firmly.
INSTALLATION
1. Insert the provided rubber O-ring into the base of
the hand shower diverter, and attach the diverter to the
tub faucet as shown. Apply a bit of thread sealant or
plumber’s tape to the threads before tightening. Use an
adjustable wrench to tighten firmly.
Tip: Wrap the nut with a thin wash cloth while tightening
to prevent the wrench from scratching the plated
finish.
2. Slide the hand shower cradle onto the lower riser
pipe. Position the cradle in its desired location, then
tighten the set screw on the cradle to secure using the
provided hex wrench.
Shower Conversion Kit with Hand Shower Installation Instructions
3. Slide the riser nut onto the lower riser pipe, with the
threaded side facing down. Slide the rubber cone
washer onto the lower riser pipe below the riser nut,
with the beveled side of the washer facing down as
shown.