Manualshelf

Installation Sheet

ManualsBrandsSignature Hardware ManualsShop All Signature HardwareSignature Hardware Nottingham 34-1/2" Floor Mounted Clawfoot Tub Filler Faucet with Integrated Diverter- Includes Telephone Style Hand Shower
12
2Freestanding Tub Faucet Installation Instructions
5. Attach the faucet to the upper riser pipes and tighten the slips nuts to secure. Allow sealant to cure for 24 hours be-
fore use.
6. Place a washer inside the base of the hand-held shower cradle and attach the cradle to the faucet body.
7. If included, attach the hand shower hose and rubber washers to the shower cradle outlet and hand-held shower.
Place the hand-held shower in the cradle.
8. Turn on the main water supply.
9. To remove debris, turn the faucet on and allow the water to run through the spout for approximately 60 seconds.
Divert the water to the hand shower and allow the water to ow through the hose for approximately 60 seconds.
Check to make sure that all connections are tight (no water should be leaking).
A
F
E
D
C
B
H
G
I
J
PARTS LIST:
A. (2) Rubber Washer
E. (2) Lock Nut
B. (2) Slip Nut
G. (2) Metal Washer
C. (2) Riser Pipe
H. (2) Lock Nut
D. (2) Bell Flange
I. (2) Rubber Washer
F. (2) Rubber Washer
J. (2) NPT Adapter
Floor