Installation Sheet

Corner Shower Curtain Rod Installation Instructions 2
INSTALLATION
5. Drill pilot holes for the wall anchors.
Note: If there is a stud in your mounting location, use wood screws to
attach the wall brackets.
6. Gently tap the anchors into the pilot holes with a hammer.
7. Attach the rod and brackets to the wall with the mount-
ing hardware provided.
4. Mark the placement of the mounting holes. Use a tape
measure and level to make sure that your pencil marks are
lined up properly on each wall.
CORNER SHOWER CURTAIN ROD
8. Slide the 1" loop onto the curved section of the rod.
9. Insert the ends of the rod into the wall brackets.
Tighten the set screws with a Philips head screwdriver
to secure.