Installation Sheet

ManualsBrandsSignature Hardware ManualsKitchen SinksSignature Hardware Floral Design 36" Copper Farmhouse Sink

1Copper Farmhouse Sink Installation Instructions

INSTRUCTIONS

Unpack and inspect the sink for any shipping

damages and ensure that none of the required

pieces are missing. If you ﬁnd any damages, do

not install. Contact Customer Service at

1-866-855-2284. If you need assistance while

installing your new farmhouse sink, call our

Customer Service number.

Due to the manufacturing process, each sink

will vary slightly dimensionally. Farmhouse sinks

may require custom cabinetry. We recommend

consulting an experienced cabinet maker for

assistance. Providing the cabinet maker with

the actual sink to be installed will ensure a

custom ﬁt.

Please use assistance when lifting the sink in

order to avoid personal injury.

We recommend consulting a professional if

you are unfamiliar with installing kitchen

ﬁxtures and plumbing. Signature Hardware

accepts no liability for any damages to the

ﬂoor, walls, plumbing or personal injury

during installation.

TOOLS AND MATERIALS:

Pencil

Read the following installation below. Observe

all local plumbing and building codes.

BEFORE INSTALLING

MATERIAL DESCRIPTION AND CARE

Thread Sealant

Tape Measure

COPPER FARMHOUSE SINK

Safety Glasses

Framing Square

Level

Hacksaw

Wood Shims

Drill

Basin Wrench

**Sealant - Because normal silicone is

corrosive to some metals, particularly

copper, we recommend the use of a

neutral cure silicone caulk.

Copper sinks are specially designed for both durability and

beauty. Created with a single sheet of heavy gauge copper,

our copper farmhouse sinks have no internal welds,

strengthening the sink’s structure and preventing leakage.

The apron front is welded with solid copper by skilled artisans,

ensuring both aesthetic appeal and quality.

Copper sinks will patina with time and normal use creating a

much sought-after living ﬁnish. Because of copper’s natural

composition, cleaning is easy. Simply rinse after each use to

rid the surface of any soap or dirt and wipe dry. Apply wax,

such as Table Top Wax, at least once every 15-20 days to

keep your copper sink in its original condition and prevent the

natural aging process. For a more thorough cleaning, wash

occasionally with dish soap and a sponge.

Do not use copper or silver cleaners, or any abrasive or harsh

chemicals on your copper sink. Avoid contact with hot pots

or pans, as this may cause distortion due to copper’s low

melting temperature.

Summary of content (3 pages)

PAGE 1
COPPER FARMHOUSE SINK BEFORE INSTALLING TOOLS AND MATERIALS: Read the following installation below. Observe all local plumbing and building codes. INSTRUCTIONS Unpack and inspect the sink for any shipping damages and ensure that none of the required pieces are missing. If you ﬁnd any damages, do not install. Contact Customer Service at 1-866-855-2284. If you need assistance while installing your new farmhouse sink, call our Customer Service number.
PAGE 2
INSTALLATION OPTIONS We recommend under-mount sink installation. Flush-mount and built-up installation are not recommended. Ensure there is adequate room for the faucet and backsplash installations. DRAIN INSTALLATION Apply a bead of silicone sealant to the base of the strainer ﬂange and place the ﬂange in the drain opening in the sink. If your drain has a disposer ﬂange, use the directions supplied with the garbage disposer to attach the disposer and complete your installation.
PAGE 3
PREPARE THE CABINET Farmhouse sinks may require custom cabinetry. We recommend consulting an experienced cabinet maker for assistance. Providing the cabinet maker with the actual sink that is to be installed will ensure a custom ﬁt. Allow clearance for the water supply lines, drains and a garbage disposal, if applicable. Build a support frame or install support bars from front to back along the inner sides of the cabinet. The frame must support the weight of the sink and all attachments.