Installation Sheet

COPPER DROP-IN/UNDERMOUNT SINK
1. Carefully turn the counter top over, resting it on a
soft, stable surface to prevent damage.
Important: The counter top is very fragile. Take
caution when handling, and have someone assist if
needed.
2. Position the sink over its cutout on the counter top.
Make sure the sink is centered with the faucet hole
and is evenly spaced between the bolt holes.
5. Apply a thin bead of silicone sealant around the
perimeter of the sink, where the sink meets the
counter top. This will prevent moisture from getting
underneath the rim of the sink.
6. Proceed to the installation of your drain and faucet.
Allow 24 hours for the silicone sealant to fully dry.
3Copper Drop-In/Undermount Sink Installation Instructions
Undermount Installation