Manualshelf

Installation Sheet

ManualsBrandsSignature Hardware ManualsBathroom FaucetsSignature Hardware Ballantine 1.2 GPM Wall Mounted Vessel Widespread Bathroom Faucet with Lever Handles and Pop-Up Drain Assembly
12345
2Ballantine Wall-Mount Faucet Installation Instructions
BALANTINE WALL-MOUNT FAUCET INSTALLATION
INSTALLATION
1. Prepare for installation by installing wood blocking
between the two studs where the faucet will mount.
Important: Take into consideration the thickness of
your finished wall materials. If your valve is installed too
far behind your finished wall, you may be left with
insufficient clearance to attach the spout and handles.
3. Attach the main water lines to the valve. Apply
thread sealant or plumber’s tape to the threaded
connection to ensure a watertight seal.
2. Mount the rough-in valve into its prepared location.
Attach the valve body to the wood blocking using
glavanized pipe clamps. Use a level to ensure that the
valve is mounted straight.
IMPORTANT: COMPLETE THE CONSTRUCTION OF
YOUR WALL, INCLUDING ANY FINISHED WALL
MATERIALS SUCH AS TILE, BEFORE PROCEEDING
WITH THE REMAINDER OF THE INSTALLATION.
STOP
Wood Blocking
Finished Wall
Apply
thread
sealant or
plumber’s
tape