Installation Sheet

6Acrylic Clawfoot Tub Installation Instructions
ACRYLIC CLAWFOOT TUB
3. Carefully set the tub back into position and adjust
the feet adjusters as necessary. Once level, apply a
generous bead of silicone on the bottom of the feet.
This will prevent the tub from shifting after installation.
4. Next you will need to trim your drain and overflow
pipes to the appropriate sizes. Steps 5-8 will walk you
through.
5. To trim the drain and overflow pipes appropriately,
you will need to temporarily fit the overflow and drain
assemblies to the tub.
6. The overflow tee (A) will be attached at the points
where the drain pipes intersect (B).
7. Measure and mark each pipe so that the end of
the pipe reaches at least a little bit over halfway into
the overflow tee.
A
B